Honeywell Home Pro Series Bedienungsanleitung

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere Honeywell Thermostat Handbücher

Honeywell

Honeywell RTH230B - 5-2 Day Programmable Thermostat Bedienungsanleitung

Honeywell

Honeywell 69-0568 Bedienungsanleitung

Honeywell

Honeywell TP979A-E Bedienungsanleitung

Honeywell

Honeywell FocusPRO 6000 Series Bedienungsanleitung

Honeywell

Honeywell TRADELINE T8400C Bedienungsanleitung

Honeywell

Honeywell T822 Bedienungsanleitung

Honeywell

Honeywell FocusPRO 5000 Bedienungsanleitung

Honeywell

Honeywell RTH6400 Series Bedienungsanleitung

Honeywell

Honeywell CT1800 Bedienungsanleitung

Honeywell

Honeywell PRO TH4110B Bedienungsanleitung

Honeywell

Honeywell PRO 1000 Bedienungsanleitung

Honeywell

Honeywell TRADELINE T8011R Bedienungsanleitung

Honeywell

Honeywell EConnect TL9160AR Bedienungsanleitung

Honeywell

Honeywell RET97C Series Bedienungsanleitung

Honeywell

Honeywell RTH6400 Series Bedienungsanleitung

Honeywell

Honeywell Y87RF Bedienungsanleitung

Honeywell

Honeywell TH3110D1008 - Digital Thermostat, 1h Bedienungsanleitung

Honeywell

Honeywell pro Series Bedienungsanleitung

Honeywell

Honeywell INNCOM e7w Bedienungsanleitung

Honeywell

Honeywell Lyric Bedienungsanleitung

Honeywell

Honeywell T451 Bedienungsanleitung

Honeywell

Honeywell CM67 Bedienungsanleitung

Honeywell

Honeywell CM702 Bedienungsanleitung

Honeywell

Honeywell RTH4300B Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Aube Technologies

Aube Technologies TH305 Bedienungsanleitung

Powtier Controls

Powtier Controls 505MST Bedienungsanleitung

Kanmor

Kanmor Zone Control 369e Bedienungsanleitung

MICROclimate International

MICROclimate International B2 Magic Eye Bedienungsanleitung

T6 Pro USER MANUAL/USER GUIDE Honeywell Home Pro Series

Contents hide

1 Optional Cover Plate installation

2 UWP Mounting System installation

3 Power options

4 Setting Slider Tabs

5 Thermostat mounting

6 System operation settings

7 Fan operation settings

8 Installer setup (ISU)

9 Installer system test

10 Documents / Resources

T6 Pro Programmable Thermostat Installation Instructions.

Package Includes:

• T6 Pro Thermostat

• UWP Mounting System

• Honeywell Standard Installation Adapter (J-box adapter)

• Honeywell Decorative Cover Plate – Small; size 4-49/64 in x 4-49/64 in x 11/32 in (121 mm

x121 mm x 9 mm)

• Screws and anchors

• 2 AA Batteries

Optional Cover Plate installation

NOTE: If Optional Cover Plate is not required, see “UWP Mounting System installation” on

next page.

Use the Optional Cover Plate when:

• Mounting the thermostat to an electrical junction box

• Or when you need to cover paint gap from old thermostat.

1. Separate the Junction Box Adapter from the Cover Plate. See Figure 1.

2. Mount the Junction Box Adapter to the wall or an electrical box using any of the eight

screw holes. Insert and tighten mounting screws supplied with Cover Plate Kit. Do not

overtighten. See Figure 2. Make sure the Adapter Plate is level.

3. Attach the UWP by hanging it on the top hook of the Junction Box Adapter and then

snapping the bottom of the UWP in place. See Figure 3.

4. Snap the Cover Plate onto the Junction Box Adapter. See Figure 4.

UWP Mounting System installation

Before starting, turn the power off at the breaker box or switch. Open package to find the5.

UWP. See Figure 5.

Position the UWP on wall. Level and mark hole positions. See Figure 6.6.

Drill holes at marked positions, and then lightly tap supplied wall anchors into the wall

using a hammer. ‒ Drill 7/32” holes for drywall.

Pull the door open and insert the wires through wiring hole of the UWP. See Figure 7.7.

8Place the UWP over the wall anchors.Insert and tighten mounting screws supplied with the8.

UWP. Do not overtighten. Tighten until the UWP no longer moves. Close the door. See

Figure8.

Power options

Setting Slider Tabs

Set R Slider Tab.

• Use built-in jumper (R Slider Tab) to differentiate between one or two transformer

systems.

• If there is only one R wire, and it is connected to the R, Rc, or RH terminal, set the slider

to the up position (1 wire).

• If there is one wire connected to the R terminal and one wire connected to the Rc

terminal, set the slider to the down position (2 wires).

NOTE: Slider Tabs for U terminals should be left in place for T6 Pro models.

Wiring terminal designations

Thermostat mounting

1.Push excess wire back into the wall opening.

2. Close the UWP door. It should remain closed without bulging.

3. Align the UWP with the thermostat, and push gently until the thermostat snaps in place.

4. Turn the power on at the breaker box or switch.

System operation settings

1 Press the Mode button to cycle to the next available System mode.

2 Cycle through the modes until the required System mode is displayed and leave it to