Honeywell MagicStat CT3300 Benutzerhandbuch

Model CT3300 Installation Quick Guide

69-1550

Your NEW thermostat may be programmed before or after installation (see reverse).

Items needed: two AA batteries, pan head screwdriver, drill and level (optional).

1. Turn off Heating/Cooling system power.

2. Remove old thermostat from wall. Use enclosed labels to mark the wires as you

disconnect them. Label wires by using letters above screw terminals, not by wire colors.

3. Install batteries into programmable thermostat.

4. Separate wallplate from new thermostat. Mount wallplate to wall with hardware

provided. Use level if desired and 3/16 in. drill bit in drywall or 7/32 in. drill bit in

plaster or wood.

5. Attach the system wires to matching screw terminals, using the label designations

from step 2. NOTE: If you have 5 wires, remove factory installed jumper between R and Rc.

6. Mount the thermostat to wallplate - insert top and snap in bottom.

7. Set the thermostat System switch to Heat or Cool and the system will

operate at the factory settings. See Programming Quick Guide (reverse)

to program thermostat.

Congratulations! You have finished installing your new Honeywell programmable thermostat!

For additional information refer to Programming and Installation Instructions or contact

Honeywell Customer Relations at www.honeywell.com/yourhome or 1-800-468-1502.

Model CT3300 Programming Quick Guide

Set Current Time and Day

Press once; pressTime until current time is displayed. Press again; press Time until current

day is displayed. Press .

Heating Program

Set System switch to Heat. Press once. Press Time and Temp to program WAKE for Mon. - Fri.

Repeat for LEAVE, RETURN and SLEEP.

Press until Sat. - Sun. appear in display. Press Time and Temp to program WAKE for Sat. - Sun.

Repeat for SLEEP.

After programming is finished, Press .

Cooling Program

Set System switch to Cool. Repeat each step in the Heating Program to set cooling program.

Set

Clock/Day

Set

Clock/Day

Ahead

Back

Ahead

Back

Ahead

Back

Ahead

Back

Warmer

Cooler

Warmer

Cooler

Run

Program

Run

Program

Weekday

Schedule

Weekend

Schedule

Program the CT3300 Thermostat before or after the thermostat is mounted to the wall.

Simply insert batteries (see Installation Quick Guide) to activate.

Open thermostat cover to access programming buttons and system switches.

For additional information refer to the Programming and Installation Instructions or contact Honeywell Customer Relations at

www.honeywell.com/yourhome or 1-800-468-1502.

Andere Handbücher für MagicStat CT3300

Inhaltsverzeichnis

Andere Honeywell Thermostat Handbücher

Honeywell

Honeywell TB7300A5014B Bedienungsanleitung

Honeywell

Honeywell 08161 Bedienungsanleitung

Honeywell

Honeywell FocusPRO Wi-Fi TH6000 Series Bedienungsanleitung

Honeywell

Honeywell VisionPRO Series Bedienungsanleitung

Honeywell

Honeywell VisionPRO Series Bedienungsanleitung

Honeywell

Honeywell WebPAD S7350B Bedienungsanleitung

Honeywell

Honeywell RTH3100C Bedienungsanleitung

Honeywell

Honeywell TB7200 Series Gebrauchs- und Pflegehandbuch

Honeywell

Honeywell PRO TH1000 Series Bedienungsanleitung

Honeywell

Honeywell Tradeline T874A-F Bedienungsanleitung

Honeywell

Honeywell TH9000 Series Bedienungsanleitung

Honeywell

Honeywell TC300 Bedienungsanleitung

Honeywell

Honeywell VisionPRO 8000 Bedienungsanleitung

Honeywell

Honeywell Lyric T6R Bedienungsanleitung

Honeywell

Honeywell Y87RF Bedienungsanleitung

Honeywell

Honeywell THX9000 Prestige HD Bedienungsanleitung

Honeywell

Honeywell TRADELINE T4798S Bedienungsanleitung

Honeywell

Honeywell RTH6500WF Wi-Fi Series Bedienungsanleitung

Honeywell

Honeywell T6 Pro Hydronic Bedienungsanleitung

Honeywell

Honeywell RTH9580 Wi-Fi Bedienungsanleitung

Honeywell

Honeywell T6380 Bedienungsanleitung

Honeywell

Honeywell RTH6400 Series Bedienungsanleitung

Honeywell

Honeywell T7200 Bedienungsanleitung

Honeywell

Honeywell T87M2036 Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Aube Technologies

Aube Technologies TH305 Bedienungsanleitung

Powtier Controls

Powtier Controls 505MST Bedienungsanleitung

Kanmor

Kanmor Zone Control 369e Bedienungsanleitung