Honeywell RCT8100 Bedienungsanleitung

RCT8100

Programmable Thermostat

Operating

Manual

69-2337EF-01

69-2337EF-01.book Page -1 Friday, May 25, 2012 2:24 PM

Need Help?

For assistance with this product please visit http://yourhome.honeywell.com

or call Honeywell Customer Care toll-free at 1-800-468-1502.

Read and save these instructions.

® U.S. Registered Trademark. Patents pending.

CAUTION: EQUIPMENT DAMAGE HAZARD

To prevent possible compressor damage, do not use Cooling mode when the outdoor

temperature is below 50 °F (10 °C).

69-2337EF-01.book Page 0 Friday, May 25, 2012 2:24 PM

RCT8100 Programmable Thermostat

About your new thermostat

Thermostat features ..................................... 2

Early Start .................................................... 3

Compressor protection ................................. 3

Quick reference to controls........................... 4

Quick reference to display ............................ 5

Quick start .................................................... 6

Programming & Operation

Set the clock................................................. 7

Select system setting (Heat/Cool) ................ 8

Select fan setting (Auto/On) ......................... 9

Using the schedule................................ 10-13

Temporary schedule override ..................... 14

Permanent schedule override..................... 15

Appendices

Filter replacement........................................16

Battery replacement ....................................17

In case of difficulty.......................................18

Customer assistance...................................19

Limited warranty ..........................................20

Table of contents

Your new thermostat is pre-programmed

and ready to go!

See page 6 for quick start.

69-2337EF-01.book Page 1 Friday, May 25, 2012 2:24 PM

Operating Manual

69-2337EF—01 2

Your new Honeywell thermostat has been designed to give you many years of reliable service and

easy-to-use, push-button climate control.

Features

• Backlit display is easy to read

• Displays ambient (measured) temperature at all times

• One-touch access to setpoint temperature

• Preprogrammed schedule can greatly reduce your heating/cooling expenses

• 7-day programming

• Temporary and permanent override of schedule

• Early Start ensures right temperature at the right time

• Built-in compressor protection

About your new thermostat

69-2337EF-01.book Page 2 Friday, May 25, 2012 2:24 PM

RCT8100 Programmable Thermostat

3 69-2337EF—01

Early Start allows the thermostat to “learn” how long your furnace or air conditioner takes to reach the set

temperature. Simply program the desired times and desired temperatures into the schedule. The thermostat

will determine when to activate heating or cooling so that the desired temperature is attained at the desired

time.

Example: If you set Period 1 (see page 10) to 6 a.m. and the temperature to 70 °F (21 °C), the heat will come

on before the set time, so the temperature is 70 °F (21 °C) by the time you wake at 6 a.m.

Your thermostat has a feature that helps prevent damage to the compressor of your air conditioning. Because

damage can occur if the compressor is restarted too soon after shutdown, this feature forces the compressor

to wait 5 minutes before restarting. During the wait time, flashes on the screen. When the safe wait time

has elapsed, the icon stops flashing and the compressor turns on.

Early Start

Built-in compressor protection

69-2337EF-01.book Page 3 Friday, May 25, 2012 2:24 PM

Operating Manual

69-2337EF—01 4

Quick reference to controls

System switch

(see page 8) Fan Switch

(see page 9)

Screen

Lit for 12 seconds when

you press the backlight

button or any other button.

Programming buttons

(see pages 12 & 13)

Temperature buttons

Battery compartment (for 2 AA batteries)

Backlight button

69-2337EF-01.book Page 4 Friday, May 25, 2012 2:24 PM

RCT8100 Programmable Thermostat

5 69-2337EF—01

Quick reference to display screen

* flashes when the compressor protection is engaged (see page 3).

Temperature

The ambient (measured)

temperature is normally

displayed. To view the

setpoint temperature, press

or once. The setpoint

temperature will appear for

5 seconds.

Replace batteries

(see page 14)

Setpoint indicator

Appears when the setpoint

temperature is displayed.

Time

Current period number

Appears when the thermostat

is following the schedule (see

temporary override on page

14 and permanent override on

page 15)

Day

Heating is on

Cooling is on *

Replace filter

(see page 14)

69-2337EF-01.book Page 5 Friday, May 25, 2012 2:24 PM

Operating Manual

69-2337EF—01 6

Simply perform the three steps below and the thermostat is in operation:

Set the clock.................................................................................................................. See page 7

Select whether to heat or cool....................................................................................... See page 8

Select whether to keep the fan on continuously or only when needed.......................... See page 9

If you do not wish to use the pre-programmed schedule settings, you can:

Modify the schedule .................................................................................................... See page 12

Temporarily override the schedule .............................................................................. See page 14

Permanently override the schedule............................................................................. See page 15

This thermostat is ready to go

69-2337EF-01.book Page 6 Friday, May 25, 2012 2:24 PM

RCT8100 Programmable Thermostat

7 69-2337EF—01

Press Clk. The hour will flash.

Press or to set the hour.

Press Clk. The minutes will flash.

Press or to set the minutes.

Press Clk. The day will flash.

Press or to set the day.

Press Exit.

NOTE: The time display flashes when the clock has lost its settings

Set the clock

Press to start time and day setting

Press to set the time or the day

Time and day display

Press to end time and day setting

69-2337EF-01.book Page 7 Friday, May 25, 2012 2:24 PM

Operating Manual

69-2337EF—01 8

Select the system setting

Use the System switch to place the system in one of the following

modes:

•Heat: System is in Heating mode.

•Off: System is off.

•Cool: System is in Cooling mode.

CAUTION: EQUIPMENT DAMAGE HAZARD

Do not use Cooling mode when the outdoor temperature is below 50 °F (10 °C).

NOTE: When you place the thermostat in Cooling mode, you might need to wait up to

five minutes before cooling can start. This is a safety feature for the compressor. will

flash on the screen until cooling starts.

69-2337EF-01.book Page 8 Friday, May 25, 2012 2:24 PM

Andere Handbücher für RCT8100

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Honeywell Thermostat Handbücher

Honeywell

Honeywell INNCOM e7 Bedienungsanleitung

Honeywell

Honeywell T841A Bedienungsanleitung

Honeywell

Honeywell 69-1776EFS-01 Bedienungsanleitung

Honeywell

Honeywell T8141A Bedienungsanleitung

Honeywell

Honeywell T3 Bedienungsanleitung

Honeywell

Honeywell VisionPRO TH8000 Series Bedienungsanleitung

Honeywell

Honeywell RTH2310 Bedienungsanleitung

Honeywell

Honeywell TC500A Bedienungsanleitung

Honeywell

Honeywell ST9400C Bedienungsanleitung

Honeywell

Honeywell RLV430 Bedienungsanleitung

Honeywell

Honeywell Lyric T5 W Bedienungsanleitung

Honeywell

Honeywell 191108AC Bedienungsanleitung

Honeywell

Honeywell Super Tradeline T874G Bedienungsanleitung

Honeywell

Honeywell RTH2510 Series Bedienungsanleitung

Honeywell

Honeywell TH401 Bedienungsanleitung

Honeywell

Honeywell T8600D Bedienungsanleitung

Honeywell

Honeywell T7351 Bedienungsanleitung

Honeywell

Honeywell T6360 Bedienungsanleitung

Honeywell

Honeywell Q539A Bedienungsanleitung

Honeywell

Honeywell T810C Bedienungsanleitung

Honeywell

Honeywell RCT8100 Bedienungsanleitung

Honeywell

Honeywell T841A Bedienungsanleitung

Honeywell

Honeywell PROGRAMMABLE THERMOSTAT RTH6350 Bedienungsanleitung

Honeywell

Honeywell FocusPRO Wi-Fi TH6000 Series Bedienungsanleitung

Beliebte Thermostat Handbücher anderer Marken

EWELLY

EWELLY EW-181 Bedienungsanleitung

Prolon

Prolon T1100 Montageanleitung

Computherm

Computherm Q20 Bedienungsanleitung

Heatmiser

Heatmiser neoStat Bedienungsanleitung

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Bedienungsanleitung

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Bedienungsanleitung

Saswell

Saswell SAS920XWHB-7-S-RF Leitfaden

Aircalo

Aircalo TFP1-ET85P2 Bedienungsanleitung

Carrier

Carrier DEBONAIR 33CS Bedienungsanleitung

Lennox

Lennox iHarmony Zone Thermostat Montageanleitung

Gemtech

Gemtech GT7000 Bedienungsanleitung

Rollei

Rollei Smartes 45000 Bedienungsanleitung

Sinope

Sinope TH1300RF Bedienungsanleitung

NuTone

NuTone NTBZ48 Original Betriebsanleitung

Stelpro

Stelpro MAESTRO ASMT402AD Bedienungsanleitung

Aube Technologies

Aube Technologies TH305 Bedienungsanleitung

Powtier Controls

Powtier Controls 505MST Bedienungsanleitung

Kanmor

Kanmor Zone Control 369e Bedienungsanleitung