Honeywell SmartEye Transmitter Bedienungsanleitung

7157 602 EN1B-0003UK07 0402

SmartEye

Transmitter

Installation Instructions

Contents

EN1B-0003UK07 0402

Contents

Contents 1

Overview 2

Mounting 4

Glossary 13

Technical data 14

Troubleshooting 15

Overview

For your information

Technical terms are identified by an * and are explained in the

glossary.

Application

− The SmartEye Transmitter is part of the SmartEye System* for

wireless temperature monitoring applications.

− It is a stand-alone battery operated device that measures the

temperature of a wired temperature probe e.g. in a food mobile

casecabinet.

− It sends the temperature & digital input* information to a

SmartEye Receiver* within the building.

− It monitors the state of a digital input that can be used for

applications e.g. defrost inhibit to prevent over-temperature

alarms during defrost cycle.

− SmartEye Transmitters should not be confused with Hometronic

HB30 weathersensor range.

The measured data* is transferred by radio to the SmartEye

Receiver*. This data is used by the rest of the SmartEye system* to

log temperature.

Overview

EN1B-0003UK07 0402

Delivery Includes

(1) SmartEye Transmitter

(2) Mounting bracket

(3) 2 battery cells AA 1.5V,

type LR6 (mignon)

e.g. Energiser LR6 or

Energizer HI Energy Lithium

(longer life span)

(4) Temperature probe cable

assembly. (Not shown)

(5) TP002K temperature probe.

(Not shown)

Mounting

Safety instructions

Caution!

The SmartEye Transmitter has a radio transmitter

whose function can be impaired by metallic objects or

radio devices.

- When selecting the mounting site, ensure that there is

sufficient distance to metallic objects and radio

devices.

- Select a different mounting site if radio interference

occurs.

Information on mounting the SmartEye Transmitter

Best results are achieved when all devices are mounted at a height

where clear RF paths are uninhibited by metal objects.

When selecting the mounting site, ensure that:

− Avoid metal objects directly in the path between SmartEye

Transmitter and the SmartEye Receiver.

− Transmitters and Receivers mounted at height will have RF

communication less impaired by floor objects.

Mounting

EN1B-0003UK07 0402

- Mount Transmitter with the back plate facing away from Receiver.

- Mount Receiver vertically i.e. antenna pointing up or down

− Mount Transmitter so that it is easily accessible for Teach-In* and

batterychange

Information on temperature sensor & digital input

Temperature Sensor

Only the approved Temperature sensor (TP002K) may be used. A

non-approved Temperature sensor will result in incorrect

temperature readings.

Digital Input

Refer to installation guide of SmartEye Genus Interface for

configuration of Digital Input. If configured as defrost inhibit, connect

the Digital Input to NO contacts of a relay activated during the

defrost cycle. This will prevent over-temperature alarms during

defrost.

The Digital Input and Common Ground (refer to page 8) must be

wired to voltage-free relay contacts. Closed contacts activate the

input. If the input is left unterminated it will default to a clear state.

Mounting

Therefore, if the digital input is not required, it can be left

unterminated.

Teach-In Button

Accessing the Teach-In button requires the removal of the battery

lid. This button is located next to the cable assembly socket and is

used during the Teach-In process in the commissioning stage of the

system.

Mounting the SmartEye Transmitter

1. Securing the mounting bracket

The metallic mounting bracket snaps onto the back of the

Transmitter.

When mounting the unit, ensure that the horizontal screw

hole of the mounting bracket is positioned at the top.

Mounting

EN1B-0003UK07 0402

- Select a suitable mounting site.

- Use suitable fasteners to secure the mounting

bracket firmly to the mounting surface.

2. Battery Insertion

- Remove the SmartEye Transmitter

from the mounting bracket.

- Open the battery compartment:

–Press in the battery lid.

–Pull up the housing frame.

–Remove the battery lid.

- Remove the used battery cells, if

necessary.

- Dispose of used battery cells in conformance with the local

statutoryrequirements.

Battery cells should not be disposed of in the household

waste.

You may be required by local law to dispose of used battery

Mounting

You may be required by local law to dispose of used battery

cells in a certain manner.

Always replace both battery cells.

Only use 1.5 V AA type LR6(mignon) cells e.g. Energizer LR6

or Energizer HI Energy Lithium (longer life span)

- Insert the battery cells into the battery compartment. Ensure that

the polarity is correct!

- Close the battery compartment and insert the Transmitter into the

mounting bracket.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Honeywell Sender Handbücher

Honeywell

Honeywell STT700 SmartLine Bedienungsanleitung

Honeywell

Honeywell ADEMCO 5801 Montageanleitung

Honeywell

Honeywell ADEMCO 5818MNL Montageanleitung

Honeywell

Honeywell 5815 - Ademco - Wireless Door Bedienungsanleitung

Honeywell

Honeywell SmartLine ST700 Bedienungsanleitung

Honeywell

Honeywell XYR 5000 Series Bedienungsanleitung

Honeywell

Honeywell STT850 SMARTLINE Bedienungsanleitung

Honeywell

Honeywell SmartLine ST700 Bedienungsanleitung

Honeywell

Honeywell SMV800 Bedienungsanleitung

Honeywell

Honeywell ADEMCO 5805-6 Montageanleitung

Honeywell

Honeywell STT700 SmartLine Benutzerhandbuch

Honeywell

Honeywell 5802mn2 - Ademco Wireless Panic Bedienungsanleitung

Honeywell

Honeywell PEHA FU-BLS Bedienungsanleitung

Honeywell

Honeywell oneWireless XYR 6000 Bedienungsanleitung

Honeywell

Honeywell KEGS5000 Bedienungsanleitung

Honeywell

Honeywell NTC20k Bedienungsanleitung

Honeywell

Honeywell Ademco 5811 Bedienungsanleitung

Honeywell

Honeywell NOTIFIER AFL-RM Bedienungsanleitung

Honeywell

Honeywell 5834-4EN Bedienungsanleitung

Honeywell

Honeywell SmartLine STIW400 Bedienungsanleitung

Honeywell

Honeywell STT25D Bedienungsanleitung

Honeywell

Honeywell XNX-AM Series Bedienungsanleitung

Honeywell

Honeywell ST 3000 Bedienungsanleitung

Honeywell

Honeywell 5800MICRA Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung

Excalibur

Excalibur SoundMaster FM Transmitter 144 Bedienungsanleitung