Honeywell HWB1033S Bedienungsanleitung

FREE STANDING

WATER COOLER

ENFRIADOR DE AGUA DE PISO

OWNER’S MANUAL

Read and save these instructions

before use

MANUAL DE

INSTRUCCIONES

Lea y guarde estas instrucciones

antes de usar el producto

Model / Modelo HWB1033S

For customer service please contact:

1-855-687-2223

Para servicio al consumidor favor contactar:

1-855-687-2223

1. Before First Use .........................................................................3

2. Parts and Features.....................................................................4

3. Important Safety Instructions.....................................................5

4. Function Buttons .......................................................................6

5. Indicator Lights..........................................................................7

6. Installation Guidelines................................................................7

7. Installing Your Water Cooler For The First Time ..........................8

8. Instructions For Loading The Water Bottle................................10

9. Maintenance............................................................................12

10. Technical Specication............................................................12

11. Troubleshooting Guide .............................................................13

CONTENTS

Read all instructions carefully before setting up and operating the unit. Please keep this instruction

manual for future reference. This manual is designed to provide you with important information needed

to operate and maintain your water dispenser. If you don’t understand something or you need more

assistance please contact us. Failure to follow these instructions may damage and/or impair operation

and void the warranty.

Keep proof of the original purchase date with this guide to establish the warranty period. Keep a copy

of the sales receipt.

Write down the model and serial numbers which can be found on a label located on the side of the

water cooler.

Please write the information here:

Date of Purchase: __________________________

Model Number: HWB1033S

Color: ( ) Silver

Serial Number: ____________________________

WARNING: BEFORE CONNECTING THE APPLIANCE TO THE POWER SOURCE, LET IT STAND

UPRIGHT FOR APPROXIMATELY 24 HOURS. THIS WILL REDUCE THE POSSIBILITY OF A MALFUNCTION

IN THE COOLING SYSTEM FROM MISHANDLING DURING DELIVERY.

1. BEFORE FIRST USE

No Name

1 Water Funnel

2 Hot and Cold Power Switches

3 Indicator Lights

4 Faucets

5 Cold Water Tap

6 Room Temperature Water Tap

7 Hot Water Tap

8 Safety Lock

9 Drip Tray

10 Power Cord

11 Drain Cap

12 Storage Cabinet

13 Rating Label

14 Bracket Kit

No Name

2. PARTS AND FEATURES

WARNING To reduce the risk of re, electrical shock, or injury when using your appliance,

follow these basic precautions:

• Read and understand all instructions before using

the water cooler.

• Your water cooler runs on 115 Volt AC, 60 Hz current.

Do not plug this product to 220V current.

• Before operating the product remove it from its

packaging and check if it is in good condition.

• DO NOT operate any product with a damaged cord or

plug. Using an extension cord is not recommended

with this appliance.

• Make sure the water cooler is plugged into an

exclusive properly installed GFCI (Ground-fault

Circuit-interrupter) wall outlet. Do not cut or remove

the third (ground) prong from the power cord under

any circumstances. Any questions concerning

power and/or grounding should be directed toward

a certied electrician. Improper use of the grounded

plug can result in the risk of electrical shock. If the

power cord is damaged, have it replaced by an

authorized service center.

115V AC

60Hz

3. IMPORTANT SAFETY INSTRUCTIONS

• DO NOT run power cord under carpeting or cover it with rugs or runners. Keep the cord

away from areas where it may be tripped over.

• Always unplug the appliance from the power source before cleaning, servicing or

relocating the unit.

• Make sure to turn OFF the unit when the hot and cold water tanks are empty. Always

have water inside the tanks before turning ON any switch. Overlook of this warning may

cause permanent damage to the unit from overheating.

• Remove the power cord from the electrical receptacle by grasping and pulling on the

power cord plug-end only, never pull the cord.

• DO NOT attempt to repair or adjust any electrical or mechanical functions of the unit, as

this may void the warranty.

• DO NOT let children play with this appliance, packaging or plastic bags.

• If the unit is damaged or it malfunctions, do not continue to operate it. Refer to the

troubleshooting section and /or please seek professional advice.

• Never locate the product where it may fall into a bathtub or other water container. DO

NOT use in bathrooms or outdoors.

• This appliance is not intended for use by persons

(including children or elderly) with reduced physical,

sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given

supervision or instruction concerning use of the

appliance by a person responsible for their safety.

• Never clean parts with ammable uids. The fume

can create a re hazard or explosion.

• Do not store or use gasoline or any other ammable vapors and liquids in the vicinity of

this or any other water dispenser. The fumes can create a re hazard or explosion.

• CAUTION: To prevent accidental tip hazard, the water cooler must be securely anchored

to the oor as shown in section “Installing Your Water Cooler For The First Time”

• Keep this instructions handy for future reference.

POWER:

Press on the hot or cold switches on the back of the

unit to turn on the hot and cold functions. DO NOT

turn on both switches at the same time. Please refer

to INSTALLING YOUR WATER COOLER FOR THE FIRST

TIME section.

WATER TAPS:

Push in the hot or cold water levers with a cup or

container to dispense the desire water temperature.

To use the hot lever, slide to the right the Safety Lock

located on top of the lever and simultaneously push

down on it.

DRAIN CAP:

Turn counterclockwise to remove the drain cap to drain

the water from the tanks. Turn clockwise to close the

drain cap.

SAFETY

LOCK

OPEN/ABRIR

CLOSE/CERRAR

3. IMPORTANT SAFETY INSTRUCTIONS

4. FUNCTION BUTTONS

OFF

This unit features a power light to indicate the water cooler is ON.

Additionally, it has two indicator lights for the hot and cold water respectively, which will light

up while the feature is working. Once the water has reached the minimum temperature, the

indicator lights will turn OFF.

5. INDICATOR LIGHTS

• Remove the exterior and interior packing.

• BEFORE CONNECTING THE UNIT TO THE POWER

SOURCE, let it stand upright for approximately

24 hours. This will reduce the possibility of a

malfunction in the cooling system from mishandling

during delivery.

• This unit is for indoor use only and must be installed

in a cool, ventilated area.

• Place the unit on a level surface that is strong enough

to support the dispenser.

• Keep area around the unit free of dust and dirt.

• Locate the unit away from direct sunlight and sources

of heat (stove, heater, radiator, etc.).

• Direct sunlight may affect the unit over time and

heat sources may increase electrical consumption.

Extreme cold ambient temperatures may also cause

the appliance not to perform properly.

UPRIGHT

POSITION

LEVEL SURFACE

6. INSTALLATION GUIDELINES

• Direct sunlight may also cause algae to grow inside

your water bottle that may later cause product

malfunction.

• Do not locate the unit in areas where the temperature

may fall below freezing (32º F / 0º C).

• Allow 6 inches of space between the unit and the

wall, to allow for proper air circulation to cool the

compressor.

• CAUTION: To prevent accidental tip hazard, the water cooler must be securely anchored

to the oor as shown in section “Installing Your Water Cooler For The First Time”

• Please follow the instructions to load the water bottle before plugging the unit to the

power source.

• Make sure the hot and cold water power switches are in the OFF position before plugging

the unit to the power source.

• Do not use an adapter plug with this unit.

• Do not use an extension cord with this unit. If the power cord is too short, have a qualied

electrician or service technician install an outlet near the appliance.

• Plug the unit into an exclusive properly installed grounded wall outlet. Do not cut or

remove the third (ground) prong from the power cord under any circumstances. Any

questions concerning power and/or grounding should be directed toward a certied

electrician.

ATTENTION: If you do not plan to use the water heating function for more than three days,

we recommend that you turn off the hot water power switch.

6. INSTALLATION GUIDELINES

IMPORTANT STEPS BEFORE USING YOUR WATER

COOLER

BEFORE CONNECTING THE APPLIANCE TO THE POWER SOURCE, let it

stand upright for approximately 24 hours. This will reduce the possibility of a malfunction in

the cooling system from mishandling during delivery.

WARNING: Please make sure to turn OFF the unit when the hot and cold water tanks are

empty. Always have water inside the tanks before turning ON any switch.

The water cooler is pre-cleaned at the factory but the reservoir, hot and cold water tanks and

water lines must be ushed with fresh water before use as follows:

7. INSTALLING YOUR WATER COOLER FOR THE FIRST TIME

1. Ensure the unit is unplugged.

2. Fill water reservoir with tap water full to capacity.

Allow the water to settle into the hot and cold water

tanks for 5 minutes. (Fig. 1)

3. Push each water lever (hot and cold temperature) to

ensure water is running through the unit. (Fig. 2)

4. Plug the dispenser unit into the electrical outlet. Please

review the IMPORTANT SAFETY INSTRUCTIONS and

INSTALLATION GUIDELINES before doing so.

5. Turn ON the hot water switch, wait a couple of minutes

and turn ON the cold water switch. Allow the unit to

reach the minimum cold and hot water temperatures.

This will take approximately 45 minutes and the

indicator lights will turn OFF. (Fig. 3)

6. Test the water temperatures by pushing once again on

the water levers.

7. Turn OFF both hot and cold water switches and unplug

the unit from the electrical outlet.

8. Proceed to drain the water from the faucets one at

a time by pushing on the hot and cold levers until no

more water remains.

9. Turn counterclockwise to open the drain cap and

drain the water from the tanks. Do not tilt the unit to

drain the water. (Fig. 4)

10. Close the drain cap by turning it clockwise.

11. Installing the oor Bracket Kit (Fig. 5)

Note: All hardware is included. Set up requires a drill and a Phillips

screwdriver (not included).

1. Place the L-shaped bracket (2) on the lower left side of the back of

the unit using a Phillip screwdriver to secure the small screw (3).

2. Drill a hole in the oor 6 inches away from the wall. Choose the

appropriate drill bit depending on your oor type (tile, concrete or

wood). Use the size 3/8” diameter to drill a hole 2 inches deep.

3. Place the anchor (1) in the hole so that it is ush with the oor level.

4. Align the L-shaped bracket (2) to the anchor and use the washer (4)

and the long screw (5) to secure the unit to the oor.

12. Your unit is ready to be used. Please proceed with the

water bottle loading instructions.

Fig.1

5 MIN

Fig.2

7. INSTALLING YOUR WATER COOLER FOR THE FIRST TIME

Fig.4

Fig.3

Fig.5

WARNING: Only use 3 or 5 gallon water bottles on this

water cooler.

WARNING: Please make sure to turn OFF the unit when

the hot and cold water tanks are empty. Always have water

inside the tanks before turning ON any switch.

Loading bottles with spill proof cap

• Thisunitcontainsafunnelwithaprongtoavoidspills

when using bottles with spill proof cap.

• Carefullyliftthebottle(approx.40lbs.forthe5gallon

bottle). Bend your knees to lift the bottle, not your back.

Do not place hands over the opening of the bottle while

placing it on the unit. Please seek help if you are unable

to lift the water bottle.

• Invertthe3or5gallonwaterbottleovertheunitand

gently let the neck of the bottle slide into the funnel,

making sure the spill proof cap slides down into the

prong.

• The prong will break the spill proof cap allowing the

water from the bottle to go down into the funnel and

into the main reservoir without any spills.

• Allow the water to ll all tanks of the unit for

approximately one minute.

• Pushinonallwaterleverstomakesurewaterows

from all faucets.

• Plugtheunitbackintotheelectricaloutlet.

• TurnONthehotwaterswitch,waitacoupleofminutes

and turn ON the cold water switch. Allow the unit to

reach the minimum cold and hot water temperatures.

This will take approximately 45 minutes and the

indicator lights will turn OFF.

• Testthewatertemperaturesbypushingonceagainon

the water levers.

• Yourwatercoolerisnowreadyforuse.

5G 3G

8. INSTRUCTIONS FOR LOADING THE WATER BOTTLE

Inhaltsverzeichnis

Andere Honeywell Wasserspender Handbücher

Honeywell

Honeywell kaltecSoft PW50AS Bedienungsanleitung

Honeywell

Honeywell HWB1083S Bedienungsanleitung

Honeywell

Honeywell KaltecSoft KS30E Series Bedienungsanleitung

Honeywell

Honeywell HWTLMT508W Bedienungsanleitung

Honeywell

Honeywell HWB2052W Bedienungsanleitung

Honeywell

Honeywell VE300 Bedienungsanleitung

Honeywell

Honeywell KS20S KaltecSoft Evolution Bedienungsanleitung

Honeywell

Honeywell HWBL1023 Series Bedienungsanleitung

Honeywell

Honeywell kaltecSoft PW50AS Bedienungsanleitung

Honeywell

Honeywell HWBAP1073 Series Bedienungsanleitung

Honeywell

Honeywell HWDT-510W Bedienungsanleitung

Honeywell

Honeywell KS10S Bedienungsanleitung

Honeywell

Honeywell HWBL 1013 series Bedienungsanleitung

Honeywell

Honeywell HWB1052 Series Bedienungsanleitung

Honeywell

Honeywell kaltecSoft PW50AS Bedienungsanleitung

Honeywell

Honeywell KaltecCool PW60A Bedienungsanleitung

Honeywell

Honeywell F 76 S-F Bedienungsanleitung

Honeywell

Honeywell KS20S KaltecSoft Evolution Bedienungsanleitung

Honeywell

Honeywell MV876B1018 F76S Bedienungsanleitung

Honeywell

Honeywell HWB1033W2 Bedienungsanleitung

Honeywell

Honeywell NK300SE-SO Bedienungsanleitung

Honeywell

Honeywell HWDT-620W Bedienungsanleitung

Honeywell

Honeywell HWDC-200S Bedienungsanleitung

Honeywell

Honeywell HWB2052 Series Bedienungsanleitung

Beliebte Wasserspender Handbücher anderer Marken

Monarch Water

Monarch Water ULTIMATE MINI AQUA HE Bedienungsanleitung

Haier

Haier HLM-109B Bedienungsanleitung

abc

abc Fleck 5600SXT Bedienungsanleitung

GE GXOF18G Betriebsanleitung

Kenmore

Kenmore 625.385560 UltraFilter 650 Bedienungsanleitung

Innova

Innova CEV+ Kurzanleitung

Aries

Aries Hydra DI Handbuch

GE GNCF02H Bedienungsanleitung

ProFlo

ProFlo PFB Series Bedienungsanleitung

A.O. Smith

A.O. Smith FREZYA 300S Bedienungsanleitung

Frakco

Frakco Travelsoft RV 2400HD Bedienungsanleitung

Avanti

Avanti WD31EC Bedienungsanleitung

Avanti

Avanti WD360 Bedienungsanleitung

BRIO

BRIO CLCTTL520 Benutzerhandbuch

3M HCD-1 Bedienungsanleitung

Elkay

Elkay EFHFA8_2CJO Installationshandbuch

Coway

Coway CHP-671L Bedienungsanleitung

Aqua Essentials

Aqua Essentials Borg & Overström B4 Bedienungsanleitung