Hoshizaki SRM-45A Bedienungsanleitung

COMMERCIAL SELF-CONTAINED RHOMBIC

ICE MAKER

INSTRUCTION MANUAL

SRM-60A/80A

●This booklet is an integral and essential part of the product and should be kept and

Preserved by the user.

●Please read carefully the guidelines and warnings contained herein as they are

intended to provide the installer / user with the essential information for the proper

installation and continued safe use and maintenance of the product.

●Please preserve this booklet for any further consultation that may be necessary.

Manufacturer: HOSHIZAKI (SUZHOU) CO., LTD

No. 15 Qingqiu Street, Suzhou Industrial Park, Suzhou 215126.China

SRM-45A

SRM-60A

SRM-80A

SRM-105A

SRM-125A

L1M078101(011518)

CONTENT

IMPORTANT SAFETY INFORMATION.....................................................................................1

Ⅰ . INSTALLATION INSTRUCTIONS..........................................................................................2

1. CONSTRUCTION..............................................................................................................2

2. ACCESSORIES.................................................................................................................3

3. UNPACKING......................................................................................................................4

4. LOCATION..........................................................................................................................6

5. INSTALLATION..................................................................................................................6

6. ELECTRICAL CONNECTIONS.......................................................................................6

7. WATER SUPPLY AND DRAIN CONNECTIONS.........................................................7

Ⅱ. OPERATING INSTRUCTIONS................................................................................................8

1. START UP..........................................................................................................................8

2. PREPARING THE ICEMAKER FOR LONG STORAGE.............................................8

Ⅲ. MAINTENANCE........................................................................................................................9

1. CLEANING..........................................................................................................................9

[a]Machine and Bin Exterior..........................................................................................9

[b]Scoop cleaning/Sanitisation (Daily).........................................................................9

[c]Storage Bin Interior Cleaning/Sanitisation (weekly)..............................................9

[d] Air Filter and Condenser........................................................................................11

2. PRECAUTIONS...............................................................................................................12

3. FAULT AND TREATMENT.............................................................................................13

4. BEFORE CALLING FOR SERVICE.............................................................................13

5. DISPOSAL........................................................................................................................13

6. WARRANTY.....................................................................................................................14

SPECIFICATION..........................................................................................................................14

1

IMPORTANT SAFETY INFORMATION

Throughout this manual, notices appear to bring your attention to situations which could result in death, serious injury or damage

to the unit.



RNING Indicates a hazardous situation which, If not avoided, could result in death or serious injury.

UTION Indicates a hazardous situation which, If not avoided, could result in minor or moderate injury.

NOTICE Indicates a hazardous situation which, If not avoided, could result in damage to the unit.

HYGIENE Indicates important precautions for hygiene and food safety.

INPORTANT Indicates important information about the use and care of the unit.

WARNING

The ice maker is a commercial icemaker, and should be destined only to be used for the purpose for which it has been expressly

designed.

Any other use should be considered improper and therefore dangerous. The manufacturer will not be held liable or responsible

for any damage caused by improper, incorrect and unreasonable use.

The installation, and relocation if necessary, must be carried out by qualified personnel, in accordance with current regulations,

according to the manufacturer’s instructions.

Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

The use of any electrical appliance involves the observance of some fundamental rules. In particular:

＊Instance of any high humidity and moisture increase the risk of electrical short circuits and potential electric shocks. If in doubt,

disconnect the icemaker.

＊Do not damage the power cord or pull it in order to disconnect the icemaker from the electrical supply network.

＊Do not touch electrical parts or operate the switches with damp hands.

＊This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a

person responsible for their safety.

＊Young children should be supervised to ensure that they do not play with the appliance.

＊Do not attempt to modify the ice maker. Only qualified personnel may disassemble or repair the appliance.

2

Ⅰ . INSTALLATION INSTRUCTIONS

1. CONSTRUCTION

[SRM-45A]

[SRM-60/80A]

Top Panel

Storage Bin

Louver

Power Switch

Door handle

Name Plate

ir Filter

Door handle

Name Plate

Air Filter

Top Panel

Storage Bin

Louver

Power Switch

3

[SRM-105/125A]

2. ACCESSORIES

SRM-45

SRM-60

SRM-80

SRM-105

SRM-125

Instruction Manual 1 1 1 1 1

Scoop 1 1 1 1 1

Leg 0 4 4 4 4

Instruction Manual Scoop Leg

Door handle

Name Plate

ir Filter

Top Panel

Storage Bin

Louver

Power Switch

Front Panel - Middle

4

3. UNPACKING

RNING

Children should not be allowed in reach of the Packaging elements (plastic bags and expanded polystyrene, etc.) as they are

potential sources of danger.

UTION

Do not lift or manoeuvre the carton by using the shipping bands.

When moving the unit, hold the unit bottom.

lways wear protective gloves when carrying the unit.

When handing the carton or the unpacking unit, work in pair to prevent injury.

NOTICE

Remove shipping carton, tape(s) and other packing. If the packing material is left in the ice maker, it will not work properly.

1) After removing packing, make sure that the icemaker is in good condition. If in doubt, please do not use the icemaker, but

apply to professionally qualified personnel.

2) Remove the shipping tape holding the door and front panel.

3) Remove the protective film from the exterior. If the icemaker is exposed to the sun or to heat, remove the film after the

icemaker cools.

4) Remove the shipping tape holding accessories by opening the door

5) Remove the package of accessories. Check the contents according to “2.ACCESSORIES”

[SRM-45A]

Bin Door

5

[SRM-60/80A]

[SRM-105/125A]

Bin Door

6

4. LOCATION

RNING

This ice maker is not intended for outdoor use.

This ice maker should not be located next to ovens, grills or other high heat producing equipment.

This appliance is not suitable for installation in an area where a water jet could be used.

UTION

The location should provide a firm and level foundation for the icemaker.

NOTICE

Do not place anything on top of the icemaker or in front of louver.

IMPORTANT

Normal operating ambient temperature should be within 5℃ to 38℃. Normal operating water temperature should be within

5℃ to 32℃. Operation of the icemaker, for extended periods, outside these normal temperature ranges may affect production

capacity and life.

Allow the clearance specified below for proper air circulation and ease of maintenance and/or service should they be required.

【NOTE: SRM-45

:L=1cm; SRM-60/80/105/125

: L=15cm.】

In some high humidity environments, condensation may from inside the machine and drip onto the floor. Do not install where

the floor can be affected by water.

5. INSTALLATION

UTION

Incorrect installation can cause harm to people, animals or other items, for which the manufacturer cannot be held

responsible.

＊Place the icemaker in selected permanent site.

＊When attaching the adjustable lets / nuts (accessory),

level the unit in both the left-to-right and

front-to-rear directions

[SRM-45A] [SRM-60/80/105/125A]

6. ELECTRICAL CONNECTIONS

WARNING

THIS APPLIANCE MUST BE EARTHED

This icemaker requires an earth that meets the national and local electrical code requirements.

To prevent possible severe electrical shock to individuals or extensive damage to the unit, install a proper earth wire to the

icemaker.

Disconnect the main power supply before any maintenance, requires or cleaning is undertaken.

＊This series of icemaker require a separate power supply (220VAC/10A). The electrical supply must be protected by a suitable

circuit breaker.

＊The main control box fuse is rated at 5A and should be replaced by a qualified service engineer.



Ice maker

15cm15cm

0cm

Rea

Left

Front

Top View

Ice

maker

cm

0cm

Top

Rea

Adjustable

Leg

Side View

Adjustable

Nut

7

＊Usually an electrical permit and services of a licensed electrician are required.

＊If the power cord is damaged, it must be replaced by a replacement cord available from Manufacturer Parts/Service Centres.

7. WATER SUPPLY AND DRAIN CONNECTIONS

RNING

Connect to potable water supply only.

＊The connection to the main water supply must be made in accordance with the countries’ current requirements of the Water

Supply or Water Fittings Regulations.

＊Icemaking water must be potable water. Where scaling can be caused by water quality:

-Installation of an external filter or softener is recommended. Contact your local water treatment professional or the

manufacturer’s agency.

-Multistage filtering or deionized filtering may result in the product's failure to work properly. (The reference value of water

conductivity ≥20μs/cm)

＊Water supply pressure should be within 0.07MPa（0.7bar）to 0.55MPa（5.5bar）. If the pressure exceeds 0.55MPa (5.5bar),

use a proper pressure reducing valve. Do NOT throttle back the supply tap.

＊A plumbing permit and services of a licensed plumber may be required in some areas.

＊The icemaker drain is gravity flow, so ensure drain pipe has an adequate pitch or fall.

＊Drain line should not be piped directly to the sewer system. A vertical air gap of minimum of 5cm should be between the end of

the drain pipes from the icemaker and the floor drain.

＊To prevent a backflow into the storage bin, the outlet hose must be laid as shown.

＊Be sure to use the new hose-sets supplied with the appliance. Do not reuse any old hose-sets.

1) Attach the free end of inlet hose to the stop valve, noting washer is correctly positioned. Hand

tighten sufficiently to provide leak free joint. It is a wise precaution to have the stop valve within

easy reach.

2) The outlet hose can be cut to appropriate length according to the position of the main drain nozzle.

To prevent condensation, it can be coated some insulation pipe out of drain pipe.

Note: Jointing compounds should be approved and suitable for potable water use.

[SRM-45A] [SRM-60/80/105/125A]

BAD BAD

Inlet Hose

U

Inlet Hose Outlet Hose

GOO

Downgrade Upgrade

Washer

Stop Valve

Outlet HoseInlet Hose

8

Ⅱ. OPERATING INSTRUCTIONS.

CAUTION

Do not put your hand into the back of the storage bin or the right side pump.

The ice on the evaporator may drop off, a hard block of ice may suddenly

break down, or pump motor may suddenly start-up, resulting in injury.

NOTICE

ll parts are factory-adjusted. Improper adjustments may result in failure.

If the unit is turned off, wait for at least 3 minutes before restarting the icemaker to prevent damage to the compressor.

HYGINEN

This icemaker is designed to produce edible ice. To keep the icemaker hygienic:

＊Wash your hands before removing ice. Use the plastic scoop provided (accessory).

＊The storage bin is for ice use only. Do not store anything else in the bin, nor use other electrical appliances in the bin.

＊Clean the storage bin before use (see "III.1. CLEANING").

＊Keep the scoop clean. Clean it by using neutral cleaner and rinse thoroughly.

＊Close the door after removing ice to prevent entrance of dirt, dust or insects into the storage bin.

1. START UP

The installer will normally commission the icemaker to start the automatic icemaking process. To ensure continuous operation.

Make sure that:

＊The water supply tap is on, and

＊The icemaker is connected to the power supply.

2. PREPARING THE ICEMAKER FOR LONG STORAGE

NOTICE

This icemaker will not work at subfreezing temperatures. To prevent damage to the water supply line, drain the icemaker

when air temperature is below zero.

HYGIENE

When shutting down the icemaker for two or more days, drain the icemaker to prevent contamination in the water circuit.

1) Unplug the icemaker or disconnect the power supply.

2) Close the water supply tap, and remove the inlet hose.

3) Remove all ice from the storage bin, and clean the bin.

4) Ask for draining of the icemaker by professional qualified personnel.

Water Tank

Storage Bin

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hoshizaki Eiswürfelbereiter Handbücher

Hoshizaki

Hoshizaki KM-300BAJ Bedienungsanleitung

Hoshizaki

Hoshizaki KMS-750MLH Bedienungsanleitung

Hoshizaki

Hoshizaki CUBELET ICEMAKER/DISPENSER DCM-750BAH Bedienungsanleitung

Hoshizaki

Hoshizaki KML-351MAH Bedienungsanleitung

Hoshizaki

Hoshizaki KM-1301SRJZ/3 Bedienungsanleitung

Hoshizaki

Hoshizaki KM-630MAE50 Bedienungsanleitung

Hoshizaki

Hoshizaki KMS-1400MLH Bedienungsanleitung

Hoshizaki

Hoshizaki KML-451MWH Bedienungsanleitung

Hoshizaki

Hoshizaki F-330BAH Bedienungsanleitung

Hoshizaki

Hoshizaki F-1001MAH Bedienungsanleitung

Hoshizaki

Hoshizaki KML-631MAH Bedienungsanleitung

Hoshizaki

Hoshizaki KM-150BAF Bedienungsanleitung

Hoshizaki

Hoshizaki DCM-60KE-HC Bedienungsanleitung

Hoshizaki

Hoshizaki KML-400MAE Bedienungsanleitung

Hoshizaki

Hoshizaki DCM-120FE Bedienungsanleitung

Hoshizaki

Hoshizaki KM-250MWE Bedienungsanleitung

Hoshizaki

Hoshizaki KM-151BAH Bedienungsanleitung

Hoshizaki

Hoshizaki Serenity KMS-1122MLH Bedienungsanleitung

Hoshizaki

Hoshizaki KM-470AJ Bedienungsanleitung

Hoshizaki

Hoshizaki IM-200BAC Bedienungsanleitung

Hoshizaki

Hoshizaki DCM-270BAH Bedienungsanleitung

Hoshizaki

Hoshizaki KM-320MAH Bedienungsanleitung

Hoshizaki

Hoshizaki DIM-30AE Bedienungsanleitung

Hoshizaki

Hoshizaki KM-40C-HC Bedienungsanleitung

Beliebte Eiswürfelbereiter Handbücher anderer Marken

Sub-Zero

Sub-Zero 315I Gebrauchsanweisung

Kenmore

Kenmore 2217402A Bedienungsanleitung

Cornelius

Cornelius WM600 Betriebsanleitung

GE XPIO43SCSS Bedienungsanleitung

Whynter

Whynter FIM-450HA Bedienungsanleitung

U-Line

U-Line UMCR014-SC01A Installationshandbuch

Andrew James

Andrew James AJ000522 Bedienungsanleitung

Scotsman

Scotsman CME1356 Bedienungsanleitung

Scotsman

Scotsman ACM 25 Bedienungsanleitung

Kärcher

Kärcher IP 120 Bedienungsanleitung

U-Line

U-Line SS1095 Bedienungsanleitung

Maytag

Maytag MIM1554WRS - Ice Maker Bedienungsanleitung

Princess

Princess Yonanas Bedienungsanleitung

Unold

Unold 48946 Bedienungsanleitung

Electrolux

Electrolux E15IM60GP Bedienungsanleitung

Cornelius

Cornelius UC150 ICE ONLY Bedienungsanleitung

Wessamat

Wessamat CombiLine W80 EL Bedienungsanleitung

Summit

Summit BIM68OSGDR Bedienungsanleitung