66
en
• Remove the bowl and any utensils from the
appliance before washing them.
• Do not use the appliance outdoors.
• Do not let the cord hang over the edge of a
table or hot surface.
• Keep hands and utensils away from moving
utensils to prevent the possibility of severe
personal injury or damage to the machine.
• Do not operate this appliance in the presence
ofexplosiveand/orammablefumes.
• This appliance is intended for household use
only, not for commercial or industrial use.
Use for anything other than the intended
purpose will void the warranty.
• To reduce the risk of electric shock, never
reach inside the body of the machine:
there are no user serviceable parts inside.
Repairs should be carried out by authorised
personnel only.
BEFORE FIRST USE
1. Remove all promotional packaging materials,
labels and stickers from the bowls, machine
body or attachments.
2. Before the rst use, wash the at beater,
dough hook and steel bowl using warm water
and detergent. Rinse and dry thoroughly.
Handwash the wire whisk.
3. Clean the outside of the machine with a soft
damp cloth, then wipe it dry.
4. Place the machine on a dry steady at
surface such as a counter or table. Keep it
away from the edge of the work surface.
Do not use abrasive detergents or wire
wool to clean the machine.
Do not immerse the body of the machine
in water or any other liquid.
USING THE APPLIANCE
Locking and releasing the motor
head (A)
To insert and remove any utensils and bowls, you
willneedtoliftthemotorheadrst.Performthe
following operations:
1. Rotate the releasing lever anticlockwise
2. Use your other hand to gently lift the motor
head until it stops
3. Let go of the releasing lever and rotate it
clockwise towards its starting position.
Having inserted the utensils, lower the motor
head again. Perform the following operations:
1. Rotate the releasing lever anticlockwise
2. Use your other hand to gently rotate the
motor head downwards until it stops
3. Let go of the releasing lever and rotate it
clockwise towards its starting position.
Never let go of either the motor head or
lever until the operation is complete -
both in the lifting and lowering steps.
In the motor-head locking and releasing
steps, make sure your ngers do not get
close to the articulated joint to avoid injuries.
Never switch on the appliance with
inserted utensils unless the bowl is
properly in place.
Fitting and removing the bowl (B)
Fit the bowl through the following operations:
1. Make sure the appliance is off.
2. Unplug it.
3. Release and lift the motor head.
4. Place the bowl on the locking plate.
5. Slightly rotate the bowl clockwise until it
locks in place completely.
To remove it:
1. Make sure the appliance is off.
2. Unplug it.
3. Release and lift the motor head.
4. Rotate the bowl anticlockwise until it is
released.
Assembling and disassembling the
utensils (C)
Assembling:
1. Make sure the appliance is off.
2. Unplug it.
3. Release and lift the motor head.
