HoverCam Pilot 3 Bedienungsanleitung
!
Pilot 3
User’s Manual
Welcome
3
Diagram
4
Getting Started
6
Connecting to Power
Imaging
Powering-On
Built-In PC
Power Save Modes
Activating Windows 10
Setting-Up
8
Adjusting the Pilot
Installing the Side Tray
Operating the Pilot
9
Built-In Touchscreen
Digital Keyboard and Trackpad
Digital Keyboard and Trackpad
Third Party Accessories
Connecting to a Display
11
Wireless via HoverCast
Wired via HDMI
HoverCast Set-Up
Display Mode
Audio
14
Built-In Speakers
Auxiliary
Output Display Speakers
Bluetooth
HDMI Audio De-Embedder
Audio-In / Microphone
Interfacing with Other Devices
16
HDMI / Lightning Port
Wireless via Reflector
Document Camera
18
Adjusting the Camera
Operating the Camera
Software
19
Flex 11 Camera Software
Knotester Classroom Management
Troubleshooting
20
Service and Support
22
Content
!
3
9985 Pacific Heights Blvd, #100
San Diego, California 92121#
www.hovercam.com#
+1 (858) 750-3499
Welcome
Congratulations! With the Pilot, you’ve taken a major step in revolutionizing your
classroom. Designed by educational technology professionals in California, the Pilot
allows you to operate your computer, classroom display and document camera without
turning your back to the class.#
Main Features:
•Wirelessly connect to any display via HoverCast
•Wirelessly cast bi-directional annotations between Pilot and Interactive Flat Panel
•Capture stunning visuals with included 4K Solo 8Plus document camera
•Record and upload lessons with included Flex 11 and KnoteSter software
•Interface with iOS, Android, Chromebook, Mac, PC and more
What’s in the Box:
•Pilot podium
•Accessory trey, mounting hardware and tools for installation
•HoverCast transceiver
•HoverCast AC power adapter (9V 2A), HDMI cable, USB cable.
•USB flash-drive with Pilot drivers
Have any questions, feedback or issues? Contact HoverCam Support
(866)-201-2056 | support@hovercam.com#
PAGE INTENTIONALLY LEFT BLANK
!
Diagram
4
Pull-Out
Keyboard
with Trackpad
Height-
Adjustable
Post
Base with
Retractable
Power
Cable
Lockable
Wheels
Tilt Adjustable
Deck
HoverCast
Wireless
Transceiver
40” Tempered Glass Surface
Solo 8Plus
Document
Camera
21” Multitouch
Display
Document
Positioning
Mat
Podium
Controls
iOS Lightning Port
Connection
Ports Located
on Sides and
Back
View from above
!
Diagram
5
Tilt#
Controls
Source Input
Selection
Sound and Audio
Indicator Lights
Height#Controls
Zoom-In
Zoom-Out
Rotate Image
Focus Lock
AutoFocus
Audio out#
Mic in#USB 3.0
(Type A)
HDMI In
Reset
Button
Power#
Button
RJ45 Ethernet
Port
HDMI out#
Document Camera
Controls
!
Getting Started
6
Connecting to Power
To get started, find the retractable power cable on the right side of the base and plug it into an
available AC Power Outlet. Gently tug on the cable to retract/rewind. The reel-tension system will
automatically wind the cable back into the base for easy storage and transportation. #
Power
Button
Powering - On
Press and hold the power button on located on right side of the device until the Pilot “beeps”,
signaling the start of the boot-up process. Boot-up typically takes around minute, but can vary across
models and usage. #
Power Save / Sleep Modes
If left idle, computer in the Pilot 3 will automatically enter
power save mode. To wake up your system from power
save mode, touch anywhere on the touch screen or press
any key on the keyboard. If left in power save mode for an
extended period, your Pilot will enter sleep mode. To exit
sleep mode, press the power button on the right side of the
touch screen module.
!
7
Getting Started
Imaging
The Pilot includes anRJ45 Ethernet port to
simplify imaging and facilitate wired networking. For
detailed instructions as well as the necessary
drivers, please
For convenience, the Pilot’s required drivers are
saved on an included flash-drive for re-installation
after imaging.
RJ45 Ethernet
Port
Built-In PC
The Pilot features a built-in PC, with Intel i5
processor (or an Intel i7 processor with the Pilot
Plus), a 500GB HDD (and an additional 128GB
SSD with the Pilot Plus), WiFi and bluetooth
connectivity, and other standard PC features.
No additional computer is required to operate
the Pilot.
Activating Windows 10
The computer in your Pilot comes with Windows 10 pre-
installed. It includes virtually all the functionality of a
traditional Windows PC, including interface and system
presets. A Windows license is not included with your
Pilot purchase, you will need to provide a license key in
order to activate Windows For more information on how
to use the Windows 10 operating system, go to
www.windows10-guide.com
!
8
Setting-Up
Tilt
Up/Down
Raise
Up/Down
Adjusting the Pilot
The Pilot provides motorized height and tilt
adjustments to enable the optimum operating
position. The height and tilt controls are located on
the control panel (located on the upper-right corner of
the podium surface). The podium can go from a
minimum height of ~28"to a maximum height of
~40". The surface can tilt from 0º (flat) to 30º (tilted).
The Podium’s adjustability is compliant with the ADA
wheelchair accessibility standards.
Installing the Side Tray
For added convenience, the Pilot includes a laptop tray that
attaches the side of the podium. The tray is large enough to
accommodate most laptopsand also functions as a cup
holder. It is located in close proximity to the HDMI inputs for
quick access to the Pilot's input panel.
Before tray installation, make sure the Pilot's top surface is in
flat position. To install, simply guide the trey into the two tray
support slots on the right side of the Pilot, slide the bar to the
right until it locks into place. Next, insert the lower support bar
into the support bar slot, and fasten it with the included
hardware.
Tray
Support
Tray
Support
Support Bar
Slot
Tray Support
Bar Slot
!
The Pilot includes a physical keyboard and trackpad. To access the keyboard and trackpad, locate
the slide-out tray on the front-side of the unit, and pull out to use.
Built-In Keyboard and Trackpad
Pull-Out
Keyboard and
Trackpad
Built-In Touchscreen
The Pilot’s primary means of navigation is the built-in touchscreen. The touchscreen can accommodate
up to 10 points of simultaneous touch, as well as two-finger scroll, pitch and rotation gestures. To access
the “left-click” feature, simply press and hold on the item, object or area.
21” 10-Point
Multitouch
9
Operating the Pilot
Andere Handbücher für Pilot 3
2
Inhaltsverzeichnis
Andere HoverCam Desktop Handbücher
