HP NC370F Bedienungsanleitung

HP NC370F PCI-X Multifunction Gigabit

Server Adapter User Guide

June 2007 (Third Edition)

Part Number 389196-00C

The information contained herein is subject to change without notice. The only warranties for HP products and

services are set forth in the express warranty statements accompanying such products and services. Nothing herein

should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors

or omissions contained herein.

Microsoft, Windows, and Windows NT are U.S. registered trademarks of Microsoft Corporation. Intel, Pentium,

and Itanium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States

and other countries. UNIX is a registered trademark of The Open Group. Linux is a U.S. registered trademark of

Linus Torvalds.

HP NC370F PCI-X Multifunction Gigabit Server Adapter

June 2007 (Third Edition)

Part Number 389196-00C

HP NC370F PCI-X Multifunction Gigabit Server Adapter iii

Contents

About this guide

Technician notes............................................................................................................................................v

Where to go for additional help....................................................................................................................vi

Telephone numbers................................................................................................................................vi

Chapter 1

Introduction

Overview ................................................................................................................................................... 1-1

LED indicator............................................................................................................................................ 1-2

Chapter 2

Installing the adapter

Overview ................................................................................................................................................... 2-1

Electrostatic discharge precautions ........................................................................................................... 2-1

Installing the adapter in a server................................................................................................................ 2-2

Connecting the network cable ................................................................................................................... 2-2

Appendix A

Regulatory compliance notices

Regulatory model number........................................................................................................................ A-1

European Union regulatory notice............................................................................................................ A-1

Korean notice ........................................................................................................................................... A-2

Class B equipment ............................................................................................................................. A-2

BSMI notice ............................................................................................................................................. A-2

Laser compliance...................................................................................................................................... A-2

Appendix B

Electrostatic discharge

Overview ...................................................................................................................................................B-1

Grounding methods ...................................................................................................................................B-1

Appendix C

Specifications

HP NC370F PCI-X Multifunction Gigabit Server Adapter specifications ...............................................C-1

HP NC370F PCI-X Multifunction Gigabit Server Adapter v

About this guide

Use this guide for reference when installing the HP NC370F PCI-X Multifunction Gigabit

Server Adapter.

WARNING: To reduce the risk of personal injury from electric shock and hazardous

energy levels, only authorized service technicians should attempt to repair this

equipment. Improper repairs can create conditions that are hazardous.

Technician notes

WARNING: Only authorized technicians trained by HP should attempt to repair this

equipment. All troubleshooting and repair procedures are detailed to allow only

subassembly/module-level repair. Because of the complexity of the individual boards

and subassemblies, no one should attempt to make repairs at the component level or

to make modifications to any printed wiring board. Improper repairs can create a safety

hazard.

WARNING: To reduce the risk of personal injury from electric shock and hazardous

energy levels, do not exceed the level of repairs specified in these procedures.

Because of the complexity of the individual boards and subassemblies, do not attempt

to make repairs at the component level or to make modifications to any printed wiring

board. Improper repairs can create conditions that are hazardous.

CAUTION: To properly ventilate the system, you must provide at least 7.6 cm (3.0 in.) of

clearance at the front and back of the server.

CAUTION: The computer is designed to be electrically grounded (earthed). To ensure proper

operation, plug the AC power cord into a properly grounded AC outlet only.

NOTE: Any indications of component replacement or printed wiring board modifications may void any

warranty.

About This Guide

vi HP NC370F PCI-X Multifunction Gigabit Server Adapter

Where to go for additional help

HP updates networking software frequently to include new functionality and features.

Complete the following steps to get the latest drivers, firmware, and documentation.

1. Go to the HP website (http://www.hp.com).

2. Click Support and Troubleshooting Information from the left menu bar.

3. Type the product name in the for product box and press Enter. For example, type

NC370T.

4. Download the drivers, firmware, or documentation as needed.

HP contact information

For the name of the nearest HP authorized reseller:

•In the United States, refer to the HP US service locator webpage

(http://www.hp.com/service_locator).

•In other locations, refer to the HP website (http://www.hp.com).

For HP technical support:

•In North America:

•Call 1-800-HP-INVENT (1-800-474-6836). This service is available 24 hours a day, 7 days

a week. For continuous quality improvement, calls may be recorded or monitored.

•If you have purchased a Care Pack (service upgrade), call 1-800-633-3600. For more

information about Care Packs, refer to the HP website (http://www.hp.com).

•Outside North America, call the nearest HP Technical Support Phone Center. For telephone

numbers for worldwide Technical Support Centers, refer to the HP website

(http://www.hp.com).

HP NC370F PCI-X Multifunction Gigabit Server Adapter User Guide 1-1

Introduction

Overview

The HP NC370F PCI-X Multifunction Gigabit Server Adapter is a high-performance, stand-

alone Ethernet adapter with a controller chip that delivers 1000 Mb/s Ethernet over fiber

cabling. For best performance, install the adapter in a 64-bit/133MHz, PCI-X slot. The

adapter provides failover capabilities with other Gigabit and 10/100 adapters installed in the

workstation or server.

The HP NC370F PCI-X Multifunction Gigabit Server Adapter supports current standards for

IEEE 802.3z 1000 Base-SX and PCI specifications (PCI bus specification 2z and PCI-X

specification 1.0a). Manageability support is provided by ASF 1.0 using systems with SM

Bus 2.0 interfaces.

The HP NC370F PCI-X Multifunction Gigabit Server Adapter is a supported option for

selected HP ProLiant servers. In addition to features that have shipped with other server

adapters, the NC370F adapter also supports Receive Side Scaling, TCP/IP Offload Engine

(TOE), iSCSI, and Remote Direct Memory Access (RDMA). For details about each of these

advanced features and for other information regarding the latest functionality, features, and

operating system support for this server adapter, refer to the networking page at

(http://h18004.www1.hp.com/products/servers/networking/index-nic.html).

Introduction

1-2 HP NC370F PCI-X Multifunction Gigabit Server Adapter User Guide

LED indicator

The adapter has a single fiber LC port and LED indicator for activity/link.

Figure 1-1: NC370F PCI-X Multifunction Gigabit Server Adapter

The HP NC370F PCI-X Multifunction Gigabit Server Adapter LED indicator operates as

described in the following table.

Table 1-1: LED operation for the HP NC370F PCI-X Multifunction Gigabit Server

Adapter

LED Status Description

Off No link to the adapter is established. The adapter is not

receiving power or the cable connection is not established.

On When green, link to the adapter is established. The adapter is

receiving power and the cable connection is secure.

LNK/ACT

Flashing The adapter is receiving direct packets or broadcast packets for

this specific adapter. When sending packets, the LNK/ACT light

is also flashing due to network acknowledgements received.

HP NC370F PCI-X Multifunction Gigabit Server Adapter User Guide

2-1

Installing the adapter

Overview

This chapter describes installation precautions, how to install the adapter, and how to attach

the fiber network cable.

WARNING: To avoid the risk of personal injury or damage to the equipment, consult

the safety information and user documentation provided with the equipment before

attempting installation of the adapter.

Many servers are capable of producing energy levels that are considered hazardous.

Users should not remove enclosures, nor should they bypass the interlocks provided

for removal of these hazardous conditions.

Installation of this adapter should be performed by individuals who are both qualified in

the servicing of computer equipment, and trained in the hazards associated with

products capable of producing hazardous energy levels.

This server adapter is intended for use with UL Listed ITE equipment having

instructions on adding and removing components such as PCI and PCI-X devices.

NOTE: Before removing the cover of the server, refer to the HP documentation for the proper methods

for installing a PCI card and avoiding electric shock hazards.

Electrostatic discharge precautions

A discharge of static electricity from a finger or other conductor can damage components on

the adapter. This can make the adapter inoperable. In addition to the following information,

refer to Appendix B for more precautions.

To prevent electrostatic damage, observe the following precautions:

•Always properly ground yourself when touching a static-sensitive component or

assembly.

•Avoid hand contact by transporting and storing parts in static-safe containers.

•Keep electrostatic-sensitive parts in their containers until they arrive at static-free

locations.

•Place containers on a grounded surface before removing the contents.

•Avoid touching pins, leads, or circuitry.

Installing the adapter

2-2 HP NC370F PCI-X Multifunction Gigabit Server Adapter User Guide

Installing the adapter in a server

Refer to the HP ProLiant server documentation for additional information on how to safely

install a PCI card in the server.

WARNING: If the server is not PCI Hot Plug compliant, power it down and unplug the

power cord from the power outlet before removing the server cover. Failure to do so

may damage the adapter or server.

1. Remove the power cord and server cover. Then remove the expansion slot cover from a

PCI/PCI-X slot.

WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal

system components to cool before touching them.

2. Firmly seat the adapter in the PCI/PCI-X slot and secure the expansion slot cover.

Figure 2-1: Installing the adapter in a server

3. Replace the server cover and plug in the power cord.

Connecting the network cable

The HP NC370F PCI-X Multifunction Gigabit Server Adapter uses an LC fiber port. This

port supports multimode fiber with a maximum cable length dependent on the fiber type,

mode, and cable size. Refer to Appendix C for the maximum cable length.

To insert the LC connector into the adapter port, line up the slot on the fiber connector with

the adapter and gently push until the retainers click into place.

Inhaltsverzeichnis

Andere HP Adapter Handbücher

HP 656596-B21 Bedienungsanleitung

HP AH226A - Smart Array E500/256MB Controller... Montageanleitung

HP FlexFabric 534M Bedienungsanleitung

HP NC364m Gebrauchsanweisung

HP BladeSystem Dual NC370i - Multifunction Network... Bedienungsanleitung

HP Q6274A Bedienungsanleitung

HP 86H1880 Bedienungsanleitung

HP NC7170 Installationsanleitung

HP Mini 30W Bedienungsanleitung

HP 629135-B21 Bedienungsanleitung

HP 560FLR-SFP+ Bedienungsanleitung

HP NL571AA Bedienungsanleitung

HP NC380T Bedienungsanleitung

HP NC110T Gebrauchsanweisung

HP Presario S7000 - Desktop PC Betriebsanleitung

HP FlexFabric 647586-B21 Bedienungsanleitung

HP FlexFabric 650FLB Gebrauchsanweisung

HP 530FLR-SFP+ Bedienungsanleitung

HP -380467-003 - COMPAQ PRESARIO C300 C500 C700 F500 F700 LAPTOP... Bedienungsanleitung

HP Model 744 - VME Workstation Referenzhandbuch

HP HP 3005PR Bedienungsanleitung

HP 652503-B21 Bedienungsanleitung

HP 647594-B21 Bedienungsanleitung

HP StorageWorks XP10000 - Disk Array Service-Handbuch

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung