HP Elite Slice Montageanleitung

EL-MF877-00 Page 1

Template Revision B

PSG instructions for this template are available at EL-MF877-01

Product End-of-Life Disassembly Instructions

Product Category: Personal Computers

Marketing Name / Model

[List multiple models if applicable.]

HP Elite Slice for Meeting Rooms

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU

directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as

applicable.

Item Description Notes

Quantity

of items

included

in product

Printed Circuit Boards (PCB) or Printed Circuit

Assemblies (PCA)

With a surface greater than 10 sq cm

Batteries

All types including standard alkaline and lithium

coin or button style batteries

Mercury-containing components

For example, mercury in lamps, display backlights,

scanner lamps, switches, batteries

Liquid Crystal Displays (LCD) with a surface

greater than 100 sq cm

Includes background illuminated displays with gas

discharge lamps

Cathode Ray Tubes (CRT)

Capacitors / condensers (Containing PCB/PCT)

Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height

External electrical cables and cords

Gas Discharge Lamps

Plastics containing Brominated Flame Retardants

weighing > 25 grams (not including PCBs or PCAs

already listed as a separate item above)

Components and parts containing toner and ink,

including liquids, semi-liquids (gel/paste) and toner

Include the cartridges, print heads, tubes, vent

chambers, and service stations.

Components and waste containing asbestos

EL-MF877-00 Page 2

Template Revision B

PSG instructions for this template are available at EL-MF877-01

Components, parts and materials containing

refractory ceramic fibers

Components, parts and materials containing

radioactive substances

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components

and materials requiring selective treatment can be removed.

Tool Description

Tool Size (if

applicable)

T15, T8 Electric Screwdriver

Support fixture

M/B B side support fixture

Suction pen

Cross electrical screwdriver

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Follow steps described in Disassembly instruction (file attached)

2. If parts can be removed without using a tool, remove it first

3. Use correct screwdriver and torque value before unlock the screw.

4. Disconnect RTC battery cable and remove battery from M/B.

5. Dispose of all removed components according to regulation requirements.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items

contained in the product that require selective treatment (with descriptions and arrows identifying locations).

MANUFACTURING PROCESS INSTRUCTIONS

MECHANICAL ASSEMBLY

MODEL : Slice

auditor：Stanley Chen

Notes : If finding anything uncommon, notice foreman or assistant at once.

Standard Operation Procedure

Document No. : Slice FA Disassembly SOP Station :

Operation name : Ver. : Date :

Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

Step：

Issue Dept.：Auditor：Stanley Chen NPSU-PPE

1. Loosen screw *4 of bottom case (Fig.1)

Torque：3.0 ± 0.2 Kgf．cm

2. Take off bottom case (6070B1043901) ,and

put it in the box

Disassembly bottom case

1(1/1)

0.10 2016/6/29

Fig. 1

Cross electrical screw driver #1 1

Fig. 2

Notes : If finding anything uncommon, notice foreman or assistant at once.

Standard Operation Procedure

Document No. : Slice FA Disassembly SOP Station :

Operation name : Ver. : Date :

Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

Step：

Issue Dept.：Auditor：Stanley Chen NPSU-PPE

1. Disassembly Speaker connector form MB

2. Disassembly Speaker

module(6039B0082201) and put it in the

box

Do not press the Speaker eardrum when

disassembly the speaker .

Disassembly Speaker

2(1/1)

0.10 2016/6/29

Speaker

Connector

eardrum

Put the right side hook , and

release the speaker .

Notes : If finding anything uncommon, notice foreman or assistant at once.

Standard Operation Procedure

Document No. : Slice FA Disassembly SOP Station :

Operation name : Ver. : Date :

Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

Step：

Issue Dept.：Auditor：Stanley Chen NPSU-PPE

1. Disassembly HDD connector from MB(Fig.

2. Loosen HDD bracket screw *4 (Fig.1)

Torque：2.5 ± 0.2 Kgf．cm

Disassembly HDD

3(1/1)

0.10 2016/6/29

Cross electrical screw driver #1 1

HDD

connector

Fig.1

Fig.2 Fig.3

Notes : If finding anything uncommon, notice foreman or assistant at once.

Standard Operation Procedure

Document No. : Slice FA Disassembly SOP Station :

Operation name : Ver. : Date :

Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

Step：

Issue Dept.：Auditor：Stanley Chen NPSU-PPE

1. Take HDD and remove the HDD cable

from the HDD . Put it in the box . (fig.1)

2. Loosen HDD bracket screw

(6054B1636401)*4 from the both side of

the HDD . (Fig.2)

Torque：2.5 ± 0.2 Kgf．cm

3. Put the HDD bracket and HDD in the

different box .

Disassembly HDD

4(1/1)

0.10 2016/6/29

Fig. 2

Fig.1

Cross electrical screw driver #1 1

HDD support fixture 1

Fig.3

Notes : If finding anything uncommon, notice foreman or assistant at once.

Standard Operation Procedure

Document No. : Slice FA Disassembly SOP Station :

Operation name : Ver. : Date :

Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

Step：

Issue Dept.：Auditor：Stanley Chen NPSU-PPE

1. Loosen screw *4 of the middle frame (Fig.

Torque：3.0 ±0.2 Kgf．cm

2. Turn over the machine , and disassembly

top case . (Fig.2)

3. Only for Touch model

Disassembly cable (6017B0773101)

connector on touch/B , and disassembly

the other side connector on M/B . Put the

cable in the box . (Fig.3)

4. Only for charger model

Disassembly cable connector on touch/B ,

and disassembly the other side connector

on M/B . Put the cable in the box . (Fig.3)

Disassembly top cover

5(1/1)

0.10 2016/6/29

Cross electrical screw driver #1 1

Fig.2

Fig. 1

Touch ,charger CNTR

Fig. 3

Fig.4

Notes : If finding anything uncommon, notice foreman or assistant at once.

Standard Operation Procedure

Document No. : Slice FA Disassembly SOP Station :

Operation name : Ver. : Date :

Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

Step：

Issue Dept.：Auditor：Stanley Chen NPSU-PPE

Thermal

cover

1. Disassembly DDR from the M/B , and put

it in the box .(Fig.1)

The numbers of DDR disassembly is base

on it on the M/B .

2. Loosen thermal cover

screw(6052B0156301) *4 (Fig.2)

Torque：2.0 ± 0.2 Kgf．cm

3 . Put top cover & thermal cover

(6070B1042401) in the different box.

Disassembly DDR & thermal cover

6(1/1)

0.10 2016/6/29

Cross electrical screw driver #1 1

Fig.2

Top

cover

Fig.3

Fig.1

DDR

Fig.4

Notes : If finding anything uncommon, notice foreman or assistant at once.

Standard Operation Procedure

Document No. : Slice FA Disassembly SOP Station :

Operation name : Ver. : Date :

Holding fixture list (holding fixture standard) Qty Holding fixture list (holding fixture standard) Qty

Step：

Issue Dept.：Auditor：Stanley Chen NPSU-PPE

1. Disassembly Fan cable connector on M/B

(Fig. 2)

2. Loosen thermal screw *4 (Fig.1)

Torque : 2.5 ± 0.2 Kgf．cm

Disassembly thermal module

7(1/1)

0.10 2016/6/29

Fig.1

Fig.2

FAN CNTR

T15 electrical screw driver 1

Fig.3

Andere Handbücher für Elite Slice

Inhaltsverzeichnis

Andere HP Desktop Handbücher

HP Compaq D315 Bedienungs- und Wartungshandbuch

HP A320m - Pavilion - 256 MB RAM Montageanleitung

HP 450 NG Bedienungsanleitung

HP Pavilion w1100 - Desktop PC Anleitung zur Verwendung

HP Presario SR1400 - Desktop PC Bedienungsanleitung

HP Compaq dx2810 Microtower Bedienungs- und Wartungshandbuch

HP Pavilion t348 Bedienungsanleitung

HP Media Center m500 - Desktop PC Bedienungsanleitung

HP Z620 Series Bedienungsanleitung

HP Z400 - Workstation Referenzhandbuch

HP EX470 - MediaSmart Server - 512 MB RAM Leitfaden

HP Vectra VL410 Bedienungsanleitung

HP Vectra XU6 Bedienungsanleitung

HP Pavilion w5100 Bedienungsanleitung

HP Pavilion Slimline s7500 - Desktop PC Technisches Datenblatt

HP EliteDesk 800 G4 Handbuch

HP A320m - Pavilion - 256 MB RAM Bedienungsanleitung

HP Kayak XA Handbuch

HP Pavilion a345 Montageanleitung

HP T200 Handbuch

HP Presario 5800 Series Bedienungsanleitung

HP 744 Bedienungsanleitung

HP Vectra VL6 7 Service-Handbuch

HP Vectra VLi 8SF Bedienungsanleitung

Beliebte Desktop Handbücher anderer Marken

Asus

Asus E210 Series Bedienungsanleitung

Dell

Dell Inspiron 600m Bedienungsanleitung

Dell

Dell Inspiron 3662 Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

Logitech

Logitech MK320 Bedienungsanleitung

Dell

Dell XPS 730 H2C Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Lenovo

Lenovo ThinkCentre Edge 72 Handbuch

Lenovo

Lenovo ThinkStation D20 Handbuch

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

Dell

Dell Optiplex 9010 All In One Bedienungsanleitung

Everex

Everex eXplora Bedienungsanleitung

Lenovo

Lenovo ThinkCentre M75e Bedienungsanleitung

Dell

Dell Alienware Area-51 R4 Bedienungsanleitung