HP Kayak XW04 Bedienungsanleitung

Familiarization Guide

HP Kayak XW Series 0480

This guide is for experienced technicians who have already

completed the HP Kayak PC family training course. It assumes that

the reader is already familiar with the different HP Kayak models.

However, before reading this guide, you should first read the HP

Kayak XU Series 0441 PC Workstation Familiarization Guide. It will

give you an overall description of the hardware and software options

that are also available on the HP Kayak XW Series 0480 PC

Workstation

This document is a self-paced familiarization guide containing infor-

mation that is specific only to the repair of the HP Kayak XW Series

0480 PC Workstation.

For information on the installation of accessories, refer to the paper

User’s Guide and the online documents that are supplied with the PC.

PC Workstation

To access the HP World-Wide Web

support site:

http://www.hp.com/go/kayaksupport

Notice

The information contained in this document is subject to change without notice.

Hewlett-Packard makes no warranty of any kind with regard to this material,

including, but not limited to, the implied warranties of merchantability and

fitness for a particular purpose.

Hewlett-Packard shall not be liable for errors contained herein or for incidental

or consequential damages in connection with the furnishing, performance, or use

of this material.

Hewlett-Packard assumes no responsibility for the use or reliability of its

software on equipment that is not furnished by Hewlett-Packard.

This document contains proprietary information that is protected by copyright.

All rights are reserved. No part of this document may be photocopied,

reproduced, or translated to another language without the prior written consent

of Hewlett-Packard Company.

ELSA®and GLoria Synergy® are registered trademarks of ELSA AG, Aachen

and/or ELSA Inc., Santa Clara.

Pentium®is a registered trademark of Intel Corporation.

Xeon is a trademark of Intel Corporation.

Microsoft®, Windows®and MS-DOS®are registered trademarks of the Microsoft

Corporation.

Windows NT® is a registered trademark of Microsoft Corporation.

Hewlett-Packard France

38053 Grenoble Cedex 9

France

1998 Hewlett-Packard Company

Contents

English 3

Notice. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

HP Kayak PC Workstation Overview. . . . . . . . . . . . . . . . . . . . . . . . . . 5

Before Reading This Familiarization Guide . . . . . . . . . . . . . . . . . . . . 7

Introduction the HP VISUALIZE fx6 AGP Graphics Board. . . . . . . . . 7

The HP VISUALIZE fx6 Texture Module Accessory . . . . . . . . . . . . . 8

Removing and Reinstalling the VISUALIZE fx6 Video Board. . . . . . 9

Removing the HP VISUALIZE fx6 Video Board . . . . . . . . . . . . . . . . . . 9

Reinstalling the HP VISUALIZE fx6 Video Board . . . . . . . . . . . . . . . . 9

Installing and Configuring the HP VISUALIZE fx6 Driver . . . . . . . 10

Installing the OpenGL Video Driver . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Configuring the VISUALIZE fx6 OpenGL Driver . . . . . . . . . . . . . . . . 11

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

HP VISUALIZE fx6 Configuration and Troubleshooting Guide. . . . . 12

HP VISUALIZE fx6 Diagnostics Utility . . . . . . . . . . . . . . . . . . . . . . . . 12

Verifying the HP VISUALIZE fx6 AGP Connector . . . . . . . . . . . . . . 13

Mixing HP VISUALIZE OpenGL Drivers . . . . . . . . . . . . . . . . . . . . . . 14

Using HP VISUALIZE fx6 Diagnostic Utility. . . . . . . . . . . . . . . . . . . 15

Identifying Video Boards on an HP Kayak XW. . . . . . . . . . . . . . . . . 16

Complete the Questionnaire

to Check Your Understanding. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Answers and Explanations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Electrostatic Discharge Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4English

HP Kayak PC Workstation Overview

The following table provides an overview of the HP Kayak XW Series 0480

PC Workstation. Features that are specific to this PC Workstation (and not

found on the HP Kayak XU 0441 model) are highlighted by underlining.

Component Features

Microprocessor All models have: Intel Pentium®II Xeon™ processors with 512 KB or 1 MB cache

memory. Support for up to two Pentium II Xeon processors.

External

Processor Bus

(Front Side Bus)

450 MHz: 100 MHz FSB.

Level 2 Cache

Bus

Runs at the same speed as the Processor.

Operating

System

All models are preloaded with Windows NT®4.0.

Main Memory

Note: Registered ECC SDRAM memory modules cannot be mixed with Unbuffered

modules.

Four DIMM sockets supporting:

512 MB Registered 100 MHz ECC SDRAM memory modules to a maximum of 2 GB, or

64 MB, 128 MB or 256 MB unbuffered 100 MHz ECC SDRAM to a maximum of 1 GB.

Mass Storage

All models have seven shelves:

five front-access (two 3½-inch, three 5¼-inch); two internal (3½-inch).

4.5 GB or 9.1 GB Ultra-Wide SCSI Low Profile (LP)

Optional HP FastRAID 2nd generation

SCSI

Connectors

Ultra-Wide 16-bit internal SCSI connector for both external and internal drives (up to

40 MB per second), plus two internal narrow SCSI connectors.

Subsystem with HP FastRAID Port.

Video

Controllers

Equipped with an HP VISUALIZE fx6 AGP video board. There is 18 MB of installed

SGRAM video memory. The Texture module upgrade supplies 32 MB of additional

SDRAM texture memory. The HP VISUALIZE fx6 has two connectors on the board, one

for the AGP slot and the other for the PCI slot.

HP Kayak PC Workstation Overview

1. WOL = Wake On LAN

Accessory

Board Slots

All models have 6 slots: 1 AGP, 4 PCI, 1 combination ISA/PCI.

Support for WOL1compatible LAN boards.

I PCI slot (slot 4) used for the LAN/Ultra-Wide SCSI board with RPO capability.

1 AGP slot used for the Video Adapter.

1 RAID/PCI slot which is intended for the Adaptec®

ARO-1130 PCI RAIDport™adapter new generation (FastRAID2).

Communications All models have 2 USB (A, B) connectors, 2 serial ports, 1 parallel port

CD-ROM Drive Models include either a 32X speed IDE CD-ROM, or a CD-RW CD-ROM.

Audio All models have an integrated 16-bit hi-fi audio processor

with music synthesizer and mixer

HP MaxiLife

Utility (available

on all models)

Hardware monitoring utility that monitors system components (for example: if you are

unable to get the system and display working properly). When an error is detected it is

displayed on the dedicated LCD located on the front panel.

Power Supply

Input voltage: 100-127, 200-240V ~

Input frequency: 45/66Hz

Maximum output power: 350W continuous

Component Features

Before Reading This Familiarization Guide

Before reading this familiarization guide, you should first read the HP Kayak

XU Series 0441 PC Workstation Familiarization Guide. It contains details

about the Kayak PC Workstation package, system board layout, and different

steps to help you repair the PC Workstation. All the information about the

different hardware tasks and the MaxiLife firmware for the XU Series 0441

is also valid for the HP Kayak XW Series 0480 PC Workstation.

The only major difference between these two models is the video controller.

The HP Kayak XW Series 0480 model is supplied with an HP VISUALIZE fx6

AGP video controller, while the HP Kayak XU Series 0441 model contains

the ELSA GLoria Synergy AGP video controller.

This familiarization guide contains information that is only specific to the HP

VISUALIZE fx6 AGP graphics board. This powerful graphics board includes

a hardware acceleration for many functions used to generate 3D graphics.

Typical usage is for CAD/CAM applications, visual simulation and complex

3D modelling.

Introduction the HP VISUALIZE fx6 AGP Graphics Board

This familiarization guide contains information that is only specific to the HP

VISUALIZE fx6 AGP graphics board. This powerful graphics board includes

hardware acceleration for many functions used to generate 3D graphics.

Typical usage is for CAD/CAM applications, visual simulation and complex

3D modelling.

There are no switch settings on the HP VISUALIZE fx6 video board.

Hardware manipulation is only required for the installation of the texture

module accessory, which is described in the following sections.

NOTE Always ensure that the diagnostics utility, described on page 12, has been

used before proceeding to change a suspected faulty video board.

The HP VISUALIZE fx6 Texture Module Accessory

The HP Kayak XW Series 0480 model contains an HP VISUALIZE fx6 video

board with 18 MB of SGRAM installed memory.

An additional 32 MB of SDRAM texture memory can be added by installing a

texture module. This texture module (D6795A) is only available as an

accessory for the HP VISUALIZE fx6 video board.

NOTE A similar texture module, supplying 18 MB of memory, exists for the HP

VISUALIZE fx4 video board used in the previous HP Kayak XW PC

Workstation models. These two texture modules cannot be interchanged.

The texture module for the HP VISUALIZE fx6 video board has two

connector strips, which plug into two matching sockets. If there is no

texture module installed, one of these sockets (the longer one of the two)

will contain a terminator. The second socket remains empty. The video

board will not work without a terminator installed.

NOTE The sockets are concealed beneath a short strengthening bar, which should

be removed before installing the texture module.

To install the texture module, you must first remove the HP VISUALIZE fx6

video board. When you have installed the texture module, reboot the PC

workstation. The texture module is automatically detected by the HP

VISUALIZE fx6 driver.

If you require more detailed explanation on how to install the texture

module, refer to the HP VISUALIZE fx6 Texture Module Installation Guide,

which is delivered with the accessory. The following are just basic steps to

remove and replace the HP VISUALIZE fx6 board.

Two connector strips which plug into two

matching sockets on the VISUALIZE fx6 video

board.

Removing and Reinstalling the VISUALIZE fx6 Video Board

Removing the HP VISUALIZE fx6 Video Board

1Remove the two accessory board slot screws from the HP VISUALIZE fx6

board. Then remove the screw from the support bracket.

2Use the strengthening bracket to carefully remove the HP VISUALIZE fx6

board from the PC workstation.

NOTE Due to the size of the HP VISUALIZE fx6 board, it could prove to be quite

difficult to remove. Do not try to force it when removing it from the

connectors, but remove it gently. If you do encounter any problems, check

that there isn’t anything that could be blocking it (for example, cables near

the rear end of the video board).

Reinstalling the HP VISUALIZE fx6 Video Board

1Ensure that any cables near the rear end of the video board are well clear

of the AGP and PCI slots.

2Check that the AGP and PCI connectors are installed correctly in their

sockets before securing it in place with the two accessory board screws.

Ensure that the support bracket has been put back in place.

3Reboot the PC workstation. The texture module is automatically detected

by the HP VISUALIZE fx6 driver.

Installing and Configuring the HP VISUALIZE fx6 Driver

An OpenGL video driver is available for HP VISUALIZE fx6 video board for

use under Windows NT4.0 only. Without the appropriate drivers, the PC

Workstation will only operate in VGA mode, meaning that the 3D hardware

accessory will not be available.

NOTE Video drivers are regularly updated by Hewlett-Packard for feature and

performance improvements. When installing a driver, or diagnosing an error,

you are strongly recommended to check that you have the latest driver

version. These can be found on the HP World Wide Web site:

http//www.hp.com/go/kayaksupport

Installing the OpenGL Video Driver

Installation of the driver is done through the standard process:

Display Properties / Settings / Display Type

To check the driver version, click the About tab in the Display Properties

dialog box.

Installed fx6 driver

version

If the texture module

(optional upgrade,

part number D6795A)

is installed, it is also

displayed

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HP Desktop Handbücher

HP Media Center Bedienungsanleitung

HP Presario SR1200 - Desktop PC Bedienungsanleitung

HP Pavilion t100 - Desktop PC Gebrauchs- und Wartungshandbuch

HP Pavilion d4000 - Desktop PC Montageanleitung

HP Chromebook x360 14c-ca0000 Bedienungsanleitung

HP EliteDesk 800 Bedienungsanleitung

HP TouchSmart 610-1000 Bedienungsanleitung

HP Compaq Presario Handbuch

HP Pavilion a6000 Bedienungsanleitung

HP Workstation xw6000 Betriebsanleitung

HP Compaq Microtower Business PC dx2300 Gebrauchsanweisung

HP Compaq dc7600 MT Bedienungs- und Wartungshandbuch

HP Kayak XW U3-W3 Stücklistenhandbuch

HP Brio 8200 Bedienungsanleitung

HP Pro 3330 Bedienungsanleitung

HP Compaq Presario Handbuch

HP Pavilion w5100 Betriebsanleitung

HP Compaq dx2200 MT Series Bedienungsanleitung

HP Compaq dx7300 MT Handbuch

HP Blade bc1000 Bedienungs- und Sicherheitshinweise

HP HP-UX 11i Technisches Handbuch

HP Vectra XE320 Produkthandbuch

HP J282 Handbuch

HP Pavilion t478d Bedienungsanleitung

Beliebte Desktop Handbücher anderer Marken

Asus

Asus E210 Series Bedienungsanleitung

Dell

Dell Inspiron 600m Bedienungsanleitung

Dell

Dell Inspiron 3662 Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

Logitech

Logitech MK320 Bedienungsanleitung

Dell

Dell XPS 730 H2C Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

Dell

Dell Optiplex 9010 All In One Bedienungsanleitung

Everex

Everex eXplora Bedienungsanleitung

Lenovo

Lenovo ThinkCentre M75e Bedienungsanleitung

Dell

Dell Alienware Area-51 R4 Bedienungsanleitung

Compaq

Compaq iPAQ Internet Device Bedienungsanleitung

Parker

Parker PA Series Bedienungsanleitung