HP Rp3000 - Point of Sale System Bedienungsanleitung

Computer Setup (F10) Utility Guide

HP rp3000

Development Company, L.P. The

information contained herein is subject to

change without notice.

Microsoft, Windows, and Windows Vista are

either trademarks or registered trademarks

of Microsoft Corporation in the United States

and/or other countries.

The only warranties for HP products and

services are set forth in the express warranty

statements accompanying such products

and services. Nothing herein should be

construed as constituting an additional

warranty. HP shall not be liable for technical

or editorial errors or omissions contained

herein.

This document contains proprietary

information that is protected by copyright. No

part of this document may be photocopied,

reproduced, or translated to another

language without the prior written consent of

Hewlett-Packard Company.

Computer Setup (F10) Utility Guide

HP rp3000

First Edition (August 2008)

Document Part Number: 498352-001

About This Book

This guide provides instructions on how to use Computer Setup. This tool is used to reconfigure and

modify computer default settings when new hardware is installed and for maintenance purposes.

WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily

harm or loss of life.

CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage

to equipment or loss of information.

NOTE: Text set off in this manner provides important supplemental information.

ENWW iii

iv About This Book ENWW

Table of contents

Computer Setup (F10) Utility

Computer Setup (F10) Utilities ............................................................................................................. 1

Using Computer Setup (F10) Utilities .................................................................................. 2

Computer Setup—File ......................................................................................................... 2

Computer Setup—Storage .................................................................................................. 3

Computer Setup—Security .................................................................................................. 5

Computer Setup—Power ..................................................................................................... 7

Computer Setup—Advanced ............................................................................................... 7

Recovering the Configuration Settings ................................................................................................. 9

ENWW v

vi ENWW

Computer Setup (F10) Utility

Computer Setup (F10) Utilities

Use Computer Setup (F10) Utility to do the following:

●Change factory default settings.

●Set the system date and time.

●Set, view, change, or verify the system configuration, including settings for processor, graphics,

memory, audio, storage, communications, and input devices.

●Modify the boot order of bootable devices such as hard drives, optical drives, or USB flash media

devices.

●Select Post Messages Enabled or Disabled to change the display status of Power-On Self-Test

(POST) messages. Post Messages Disabled suppresses most POST messages, such as memory

count, product name, and other non-error text messages. If a POST error occurs, the error is

displayed regardless of the mode selected. To manually switch to Post Messages Enabled during

POST, press any key (except F1 through F12).

●Establish an Ownership Tag, the text of which is displayed each time the system is turned on or

restarted.

●Enter the Asset Tag or property identification number assigned by the company to this computer.

●Enable the power-on password prompt during system restarts (warm boots) as well as during

power-on.

●Establish a setup password that controls access to Computer Setup (F10) Utility and the settings

described in this section.

●Secure integrated I/O functionality, including the serial, USB, or parallel ports, audio, or embedded

NIC, so that they cannot be used until they are unsecured.

●Enable or disable removable media boot ability.

●Solve system configuration errors detected but not automatically fixed during the Power-On Self-

Test (POST).

●Replicate the system setup by saving system configuration information to a USB flash media device

or a diskette-like device (a storage device set to emulate a diskette drive) and restoring it on one

or more computers.

●Execute self-tests on a specified ATA hard drive (when supported by drive).

●Enable or disable DriveLock security (when supported by drive).

ENWW Computer Setup (F10) Utilities 1

Using Computer Setup (F10) Utilities

Computer Setup can be accessed only by turning the computer on or restarting the system. To access

the Computer Setup Utilities menu, complete the following steps:

1. Turn on or restart the computer.

2. As soon as the computer is turned on, press F10 when the blue HP logo screen is displayed to

enter Computer Setup. Press Enter to bypass the title screen, if necessary.

NOTE: If you do not press F10 at the appropriate time, you must restart the computer and again

press F10 when the blue HP logo screen is displayed to access the utility.

3. Select your language from the list and press Enter.

4. A choice of five headings appears in the Computer Setup Utilities menu: File, Storage, Security,

Power and Advanced.

5. Use the arrow (left and right) keys to select the appropriate heading. Use the arrow (up and down)

keys to select the option you want, then press Enter. To return to the Computer Setup Utilities

menu, press Esc.

6. To apply and save changes, select File > Save Changes and Exit.

●If you have made changes that you do not want applied, select Ignore Changes and Exit.

●To reset to factory settings or previously saved default settings (some models), select Apply

Defaults and Exit. This option will restore the original factory system defaults.

CAUTION: Do NOT turn the computer power OFF while the ROM is saving the Computer Setup (F10)

changes because the CMOS could become corrupted. It is safe to turn off the computer only after exiting

the F10 Setup screen.

Table 1 Computer Setup (F10) Utility

Heading Table

File Table 2 Computer Setup—File on page 2

Storage Table 3 Computer Setup—Storage on page 3

Security Table 4 Computer Setup—Security on page 5

Power Table 5 Computer Setup—Power on page 7

Advanced Table 6 Computer Setup—Advanced (for advanced users)

on page 7

Computer Setup—File

NOTE: Support for specific Computer Setup options may vary depending on the hardware

configuration.

Table 2 Computer Setup—File

Option Description

2 Computer Setup (F10) Utility ENWW

System Information Lists:

●Product name

●SKU number (some models)

●Processor type/speed/stepping

●Cache size (L1/L2) (dual core processors have this listed twice)

●Installed memory size/speed, number of channels (single or dual) (if applicable)

●Integrated MAC address for embedded, enabled NIC (if applicable)

●System BIOS (includes family name and version)

●Chassis serial number

●Asset tracking number

About Displays copyright notice.

Set Time and Date Allows you to set system time and date.

Flash System ROM

(some models)

Allows you to select a drive containing a new BIOS.

Replicated Setup Save to Removable Media

Saves system configuration, including CMOS, to a USB flash media device or a diskette-like device

(a storage device set to emulate a diskette drive).

Restore from Removable Media

Restores system configuration from a USB flash media device or a diskette-like device.

Default Setup Save Current Settings as Default

Saves the current system configuration settings as the default.

Restore Factory Settings as Default

Restores the factory system configuration settings as the default.

Apply Defaults and

Exit

Applies the currently selected default settings and clears any established passwords.

Ignore Changes

and Exit

Exits Computer Setup without applying or saving any changes.

Save Changes and Exit Saves changes to system configuration or default settings and exits Computer Setup.

Computer Setup—Storage

NOTE: Support for specific Computer Setup options may vary depending on the hardware

configuration.

Table 3 Computer Setup—Storage

Option Description

Device Configuration Lists all installed BIOS-controlled storage devices.

When a device is selected, detailed information and options are displayed. The following options

may be presented.

Table 2 Computer Setup—File (continued)

ENWW Computer Setup (F10) Utilities 3

Hard Disk SATA 0

●Allows you to view the size, model, firmware, serial number, and SATA connector color for the

hard drive.

●Emulation Type—Can be set to None (prevents BIOS data accesses and disables it as a boot

device) or Hard Disk (treated as hard disk).

●Multisector Transfers (ATA disks only)—Specifies how many sectors are transferred per multi-

sector PIO operation. Options (subject to device capabilities) are Disabled, 8, and 16.

●Translation Mode (ATA disks only)—Allows you to select the translation mode to be used for

the device. This enables the BIOS to access disks partitioned and formatted on other systems

and may be necessary for users of older versions of UNIX (e.g., SCO UNIX version 3.2).

Options are Automatic, Bit Shift, LBA Assisted, User, and Off.

NOTE: If User is selected for the Translation Mode, you can specify the parameters (logical

cylinders, heads, and sectors per track) used by the BIOS to translate disk I/O requests (from

the operating system or an application) into terms the hard drive can accept. Logical cylinders

may not exceed 1024. The number of heads may not exceed 256. The number of sectors per

track may not exceed 63.

CD-ROM SATA 1

Allows you to view the model, firmware, serial number, and SATA connector color for the optical

drive.

Default Values IDE/SATA

Allows you to specify the default values for the Multisector Transfers, Transfer Mode, and Translation

Mode for ATA devices.

Storage Options Removable Media Boot

Enables/disables ability to boot the system from removable media.

Legacy Diskette Write

Enables/disables ability to write data to legacy diskettes.

BIOS DMA Data Transfers

Allows you to control how BIOS disk I/O requests are serviced. When Enable is selected, the BIOS

will service ATA disk read and write requests with DMA data transfers. When Disable is selected,

the BIOS will service ATA disk read and write requests with PIO data transfers.

SATA Emulation

Allows you to choose how the SATA controller and devices are accessed by the operating system.

There are two supported options: Separate IDE Controller and Combined IDE Controller.

Separate IDE Controller is the default option. Use this option for "normal" (non-AHCI) configurations.

IDE Controller

Allows you to enable/disable the IDE Controller.

Primary SATA Controller

Allows you to enable/disable the Primary SATA Controller.

Table 3 Computer Setup—Storage (continued)

4 Computer Setup (F10) Utility ENWW

Andere Handbücher für Rp3000 - Point of Sale System

Inhaltsverzeichnis

Andere HP Desktop Handbücher

HP Xw6200 - Workstation - 2 GB RAM Gebrauchsanweisung

HP Pavilion t152 Bedienungsanleitung

HP Pavilion Elite m9150f Anleitung zur Verwendung

HP t5630 - Thin Client Bedienungsanleitung

HP d325 Slim Tower Model Bedienungs- und Wartungshandbuch

HP Pavilion t600 - Desktop PC Bedienungsanleitung

HP ProDesk 400 G2.5 Handbuch

HP Kayak XU800 Series Bedienungsanleitung

HP TouchSmart IQ820 Bedienungsanleitung

HP vectra vl420 Anleitung zur Verwendung

HP Vectra XA 6/xxx Anleitung zur Verwendung

HP A320m - Pavilion - 256 MB RAM Bedienungsanleitung

HP dx2480 - Microtower PC Bedienungs- und Wartungshandbuch

HP Rp5700 - Point of Sale System Bedienungs- und Wartungshandbuch

HP Compaq Presario Handbuch

HP ProDesk 480 G2 Bedienungs- und Wartungshandbuch

HP Vectra VE 6/xxx - 8 Betriebsanleitung

HP DC7600 - HP Bedienungsanleitung

HP Compaq dc5100 MT Bedienungs- und Wartungshandbuch

HP 512n - Pavilion - 128 MB RAM Bedienungsanleitung

HP Pavilion a6000 Bedienungsanleitung

HP P6110f - Pavilion - 6 GB RAM Gebrauchsanweisung

HP Pavilion dm4 Handbuch

HP Z210 Series Referenzhandbuch

Beliebte Desktop Handbücher anderer Marken

Asus

Asus E210 Series Bedienungsanleitung

Dell

Dell Inspiron 600m Bedienungsanleitung

Dell

Dell Inspiron 3662 Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

Logitech

Logitech MK320 Bedienungsanleitung

Dell

Dell XPS 730 H2C Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

Dell

Dell Optiplex 9010 All In One Bedienungsanleitung

Everex

Everex eXplora Bedienungsanleitung

Lenovo

Lenovo ThinkCentre M75e Bedienungsanleitung

Dell

Dell Alienware Area-51 R4 Bedienungsanleitung

Compaq

Compaq iPAQ Internet Device Bedienungsanleitung

Parker

Parker PA Series Bedienungsanleitung