HP Xw4550 - Workstation - 2 GB RAM Bedienungsanleitung

HP xw4550 Workstation

Configuring SATA RAID Devices

Development Company, L.P.

Warranty

Hewlett-Packard Company shall not be liable

for technical or editorial errors or omissions

contained herein or for incidental or

consequential damages in connection with

the furnishing, performance, or use of this

material. The information in this document is

provided “as is” without warranty of any kind,

including, but not limited to, the implied

warranties of merchantability and fitness for

a particular purpose, and is subject to

change without notice. The warranties for HP

products are set forth in the express limited

warranty statements accompanying such

products.

Nothing herein should be construed as

constituting and additional warranty.

This document contains proprietary

information that is protected by copyright. No

part of this document may be photocopied,

reproduced, or translated to another

language without the prior written consent of

Hewlett-Packard Company.

Trademark Credits

Microsoft and Windows are U.S. registered

trademarks of Microsoft Corporation.

AMD is a registered trademark of Advanced

Micro Devices, Inc. in the U.S. and other

countries.

Opteron is a trademark of Advanced Micro

Devices, Inc.

Energy Star is a U.S. registered mark of the

United States Environmental Protection

Agency.

First Edition, February 2008

Table of contents

Configuring RAID devices

Introduction ........................................................................................................................................... 1

Configuring SATA RAID devices .......................................................................................................... 1

Installing drives .................................................................................................................... 1

Enabling RAID ..................................................................................................................... 1

Configuring RAID volumes .................................................................................................. 2

Assessing drive assignments .............................................................................. 2

Deleting arrays .................................................................................................... 2

Defining arrays .................................................................................................... 2

Exiting the utility .................................................................................................. 3

Configuring the boot order ................................................................................................... 3

Rebuilding the operating system ......................................................................................... 3

ENWW iii

iv ENWW

Configuring RAID devices

This chapter describes how to configure SATA RAID devices for use with an HP xw4550 Workstation.

For additional information about configuring RAIDs, see http://www.hp.com/support/RAID_FAQs. For

information about preparing your workstation for RAID configuration, see http://www.hp.com/support/

workstation_manuals.

Introduction

This document describes the steps necessary to setup RAID 0, RAID 1 and JBOD configurations on an

HP xw4550 Workstation. For additional information on RAID configurations, see

http://h10032.www1.hp.com/ctg/Manual/c00786213.pdf.

Configuring SATA RAID devices

Installing drives

With the workstation powered off, install the correct number of SATA hard drives using the lower of four

SATA ports in the workstation chassis.

The following table indicates the number of drives to install.

RAID 0 RAID 1 JBOD

Number of disks 2 2 1 or 2

Enabling RAID

1. Boot the workstation and enter the Computer Setup (F10) Utility.

2. Use the arrow keys to select Storage>Storage Options, and then press Enter.

3. Use the up and down arrow keys to select SATA EMULATION.

4. Use the left and right arrow keys to change SATA EMULATION to RAID.

5. Press F10 two times, and then press Enter to save the settings.

The workstation now reboots.

ENWW Introduction 1

Configuring RAID volumes

After RAID is enabled in BIOS and the workstation is booted, Press Ctrl-F to enter FastBuild™

Utility appears on the monitor. When it appears, press Ctrl-F.

The first utility window to appear enables you to view, define, and delete logical drives (LD).

Assessing drive assignments

1. To identify the drive assignments, select 1and verify that all drives are free.

2. If a drive is not free, use the Delete function to remove its designator.

3. Press Esc to exit the function.

Deleting arrays

To delete an array

1. Select 3 and highlight the logical drive to delete.

2. Press DEL or Delete, and then press Ctrl-Y to confirm the delete.

3. Press Esc to exit the function.

Defining arrays

To define an array:

1. Select 2. When LD1 appears on the screen, press Enter.

A configuration menu appears on the screen. It contains the following configuration parameters

and default values:

Parameter Available values Default value

RAID Mode RAID 0, RAID 1, JBOD RAID 0

Stripe Block 64 KB, 128 KB 64 KB

Fast Init ON, OFF ON

Gigabyte Boundary ON, OFF ON

Cache Mode Write-Thru Write-Thru

Assignment (Drive 1 and

Drive 2)

N, Y N

2. Perform the following steps to change any parameter:

a. Use the arrow keys to move the cursor to the desired parameter.

b. Press Space to toggle to the desired parameter value.

2 Configuring RAID devices ENWW

Ensure that you assign a drive to be part of the array by setting its Assignment parameter

to Y.

3. To conclude array definition, choose one of the following:

●To save the array, press Ctrl-Y.

●To clear the Master Boot Record (MBR), press Ctrl-Y.

●Press Enter to use maximum capacity.

Exiting the utility

To conclude RAID configuration, choose one of the following:

●Press Esc twice to exit the utility.

●Press Y to reboot.

Configuring the boot order

1. Reboot the workstation and enter the Computer Setup (F10) Utility.

2. Select Storage>Boot Order.

3. Use the arrow keys to select ATAPI CD-ROM Drive, and then press Enter.

4. Use the up and down arrow keys to move ATAPI CD-ROM Drive to the top position, and then

press Enter.

5. Verify that the xw4550 Recovery/OS CD/DVD is installed in the optical drive.

6. Press F10 twice, press Enter, and then press F10 again to accept changes and reboot.

Rebuilding the operating system

When the recovery CD boots, follow the onscreen instructions to install the operating system on the

newly-created RAID Volume.

ENWW Configuring SATA RAID devices 3

4 Configuring RAID devices ENWW

Andere Handbücher für Xw4550 - Workstation - 2 GB RAM

Inhaltsverzeichnis

Andere HP Desktop Handbücher

HP Visualize b1000 Handbuch

HP Compaq Presario Technisches Datenblatt

HP Pavilion t400 - Desktop PC Montageanleitung

HP Compaq Presario Handbuch

HP Pavilion T3529 Bedienungsanleitung

HP dx2420 - Microtower PC Bedienungsanleitung

HP EliteOne 1000 G2 Montageanleitung

HP Compaq dx2390 Gebrauchsanweisung

HP TouchSmart 600-1200 - Desktop PC Technisches Datenblatt

HP Workstation xw4100 Handbuch

HP Model 712/100 - Workstation Bedienungsanleitung

HP TouchSmart 600-1000 - Desktop PC Bedienungsanleitung

HP Integrity rx2600 Installations- und Betriebshandbuch

HP xw9400 Gebrauchs- und Pflegehandbuch

HP TouchSmart 610-1030 Bedienungsanleitung

HP Elite 7000 Microtower Bedienungsanleitung

HP Compaq Presario Bedienungsanleitung

HP 290 G2 SFF Montageanleitung

HP 24 Montageanleitung

HP Brio 7100 Montageanleitung

HP ProOne 600 G4 Bedienungsanleitung

HP Compaq Presario Bedienungsanleitung

HP Compaq dc5000 series Einrichtungshandbuch

HP c3700 - Workstation Bedienungsanleitung

Beliebte Desktop Handbücher anderer Marken

Asus

Asus E210 Series Bedienungsanleitung

Dell

Dell Inspiron 600m Bedienungsanleitung

Dell

Dell Inspiron 3662 Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

Logitech

Logitech MK320 Bedienungsanleitung

Dell

Dell XPS 730 H2C Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Lenovo

Lenovo ThinkCentre Edge 72 Handbuch

Lenovo

Lenovo ThinkStation D20 Handbuch

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

Dell

Dell Optiplex 9010 All In One Bedienungsanleitung

Everex

Everex eXplora Bedienungsanleitung

Lenovo

Lenovo ThinkCentre M75e Bedienungsanleitung

Dell

Dell Alienware Area-51 R4 Bedienungsanleitung