HP Xw8600 - Workstation Bedienungsanleitung

HP eSATA PCI cable kit installation

Introduction

This kit provides components and installation instructions for adding an external SATA (eSATA) adapter

to the HP Workstation series and HP xw6600 and HP xw8600 Workstations. The eSATA adapter

supports up to two point-to-point eSATA connections, but does not support eSATA multipliers.

Kit contents

●eSATA adapter

●Warranty

●Installation instructions

Before you begin

To view QuickSpecs and determine the compatibility of this product with your HP workstation, see

http://www.hp.com/go/productbulletin.

ENWW Introduction 1

Warnings and cautions

WARNING! Any surface or area of the equipment marked with this symbol indicates the presence

of an electrical shock hazard. To reduce the risk of injury from electrical shock, do not open any enclosed

area marked with this symbol.

WARNING! To reduce the risk of electric shock or damage to your equipment:

— Do not disable the power cord grounding plug. The grounding plug is an important safety feature.

— Plug the power cord in a grounded (earthed) outlet that is easily accessible at all times.

— Disconnect power from the equipment by unplugging the power cord from the electrical outlet.

WARNING! Any surface or area of the equipment marked with this symbol indicates the presence

of a hot surface or hot component. If this surface is contacted, the potential for injury exists. To reduce

the risk of injury from a hot component, enable the surface to cool before touching.

WARNING! If a product is shipped in packaging marked with this symbol, , the product must always

be lifted by two persons to avoid personal injury due to product weight.

WARNING! To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper

workstation setup, posture, health, and work habits for computer users, and provides important electrical

and mechanical safety information. This guide is located at http://www.hp.com/ergo and on the

documentation CD (if one is included with the product).

CAUTION: Static electricity can damage the electronic components of the workstation. Before

beginning these procedures, be sure you discharge static electricity by briefly touching a grounded metal

object.

CAUTION: To prevent damage to the workstation, observe the following Electrostatic Discharge

(ESD) precautions while performing the system parts removal and replacement procedures:

— Work on a static-free mat.

— Wear a static strap to ensure that any accumulated electrostatic charge is discharged from your body

to the ground.

— Create a common ground for the equipment you are working on by connecting the static-free mat,

static strap, and peripheral units to that piece of equipment.

NOTE: HP accessories are for use in HP Workstation products. They have been extensively tested

for reliability and are manufactured to high quality standards.

2 HP eSATA PCI cable kit installation ENWW

Step 1—Preparing for component installation

NOTE: Workstation models vary. All illustrations are examples only.

Accessing the internal components of the workstation

1. If you need help preparing the workstation for this installation, consult the removal and replacement

procedures in the service guide for your workstation at http://www.hp.com/support/

workstation_manuals.

NOTE: For the HP Workstation series, these procedures are also available in the User

Guide on the Documentation and Diagnostics CD that shipped with your workstation.

2. Power down the workstation, and then disconnect the power cord.

3. Power down all external devices, and then disconnect them from the workstation.

4. Remove the side access panel.

Removing components

1. If present, remove the card support to enable access to the expansion slots and system board

connectors.

2. Select an available expansion slot or mechanical bulkhead slot and remove the slot cover. The

eSATA adapter can be installed in any unused slot.

NOTE: To identify an available PCIe expansion slot, see the service label on the side access

panel.

Figure 1 Removing the expansion slot cover

ENWW Step 1—Preparing for component installation 3

Step 2—Installing and connecting the eSATA adapter

NOTE: To locate the appropriate connectors on the system board, see the service label on the

workstation access panel.

1. Insert the eSATA adapter into the selected slot with the two SATA connector cables protruding

inside the workstation chassis .

2. Close the expansion slot retention clamp

Figure 2 Installing the eSATA adapter (HP xw8600 Workstation)

3. Connect the two eSATA adapter cables to two available SATA ports on the workstation system

board. On HP xw 6600 and HP xw 8600 Workstations, the red-colored SATA connectors are

designated for eSATA use.

NOTE: If only one SATA port is available or if using only one eSATA device, connect only a single

eSATA adapter cable and secure the unused cable so that it does not interfere with operation of

other components within the workstation. Note which cable port is active for external device

connection.

4. Note the system board SATA port numbers used. You need this information for system BIOS setup.

Step 3—Reassembling the workstation

1. Reinstall the card support, if applicable.

2. Reinstall the side access panel.

3. Reconnect external devices and power cord.

4. To enable external eSATA devices at this time, go to Step 4—Connecting eSATA devices to the

workstation on page 4and Step 5—Setting the system BIOS for eSATA operation

on page 5. Otherwise, you can restore power to the workstation and all external devices.

Step 4—Connecting eSATA devices to the workstation

Follow the manufacturer's instructions when connecting eSATA devices to the HP eSATA adapter.

4 HP eSATA PCI cable kit installation ENWW

Step 5—Setting the system BIOS for eSATA operation

HP Workstations

To access the Computer Setup (F10) Utility menu:

1. Power on or restart the workstation.

2. As soon as your display is active and F10=Setup appears in the lower right corner of the screen,

press F10.

NOTE: If you do not press F10 at the appropriate time, turn the workstation off, turn it on, and

then press F10 again to access the utility. You can also press the Ctrl + Alt + Delete keys before

boot if you miss the opportunity to press F10.

3. Select your language from the list, and press the Enter key.

In the Computer Setup (F10) Utility menu, five headings are displayed: File, Storage, Security,

Power, and Advanced.

4. To designate the SATA port for the first drive connected to the eSATA adapter as external, and

change the port drive strength:

NOTE: Use the left and right arrow keys to select the appropriate heading, use the up and down

arrow keys to select an option, and then press Enter.

a. Use the arrow keys to scroll to Storage >Storage Option >SATA PORT (port number),

where (port number) is the number of the port you are connecting, recorded in Step 2—

Installing and connecting the eSATA adapter on page 4.

b. Use the arrow keys to select (eSATA).

c. The SATA speed is auto-negotiated, based on the hard drive capabilities. To downgrade a

GEN2 hard drive from 3.0 Gbps to a slower speed, use the arrow keys to select GEN 2/1.5

Gbps.

NOTE: GEN 1 drives auto-negotiate to the slower 1.5 Gbps port speed.

5. To set the SATA port speed for a second port, repeat the previous step.

CAUTION: Do not power off the workstation while the ROM is saving your Computer Setup (F10)

Utility changes, because the Complementary Metal-Oxide Semiconductor (CMOS) might become

corrupted. After you exit the F10 Setup screen, you can disconnect power from the workstation.

6. To apply and save changes, select File >Save Changes.

7. Select F10=YES.

ENWW Step 5—Setting the system BIOS for eSATA operation 5

HP xw Workstations

To access the Computer Setup (F10) Utility menu:

1. Power up the workstation.

2. Press F10 as soon as your display is active and you see F10=Setup appear in the lower-right

corner of the screen.

NOTE: If you do not press F10 at the appropriate time, turn the workstation off, turn it on, and

then press F10 again to access the utility. You can also press the Ctrl + Alt + Delete keys before

boot if you miss the opportunity to press F10.

3. Select your language from the list, and press the Enter key.

4. Set the SATA/eSATA port speed for each port connect to the eSATA adapter. Omit the steps for

an eSATA port that is not connected to the eSATA adapter.

5. Use the arrow keys to scroll to Storage >Storage Option >SATA/eSATA Speed Port4 Setup.

6. Use the arrow keys to select GEN1/1.5Gbps (eSATA).

7. Use the arrow keys to scroll to Storage >Storage Option >SATA/eSATA Speed Port5 Setup.

8. Use the arrow keys to select GEN1/1.5Gbps (eSATA).

9. To apply and save changes, select File >Save Changes and Exit.

Japanese 日本語

This document is available in Japanese. See http://www.hp.com/support/workstation_manuals, then

select your workstation product and select Japanese from the drop down Manual Language menu.

このドキュメントは日本語版が用意されています。http://www.hp.com/support/workstation_manuals

にアクセスし、ご使用のワークステーション製品を選択し、Manual Language ドロップダウンメニ

ューから Japanese を選択してください。

6 HP eSATA PCI cable kit installation ENWW

Andere Handbücher für xw8600 - Workstation

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HP Desktop Handbücher

HP Pavilion t380 Bedienungsanleitung

HP OMNI100 Bedienungsanleitung

HP EliteOne 800 G1 Bedienungsanleitung

HP Visualize J5000 Bedienungsanleitung

HP Pavilion t600 - Desktop PC Montageanleitung

HP ProDesk 680 G4 PCI Microtower Business Handbuch

HP Z200 - Small Form Factor Workstation Referenzhandbuch

HP ProOne 480 G3 Montageanleitung

HP Compaq d330 ST Bedienungsanleitung

HP ZX2000 Bedienungsanleitung

HP Compaq Presario Bedienungsanleitung

HP 290 G2 MT Business Montageanleitung

HP Presario SR1200 - Desktop PC Bedienungsanleitung

HP Z Workstation series Bedienungsanleitung

HP 512n - Pavilion - 128 MB RAM Bedienungsanleitung

HP Envy Recline23 TouchSmart Beats SE... Montageanleitung

HP Pavilion t225d Bedienungsanleitung

HP ZX2000 Gebrauchs- und Pflegehandbuch

HP 300-1020 - TouchSmart - Desktop PC Leitfaden

HP Xw6600 - Workstation - 2 GB RAM Bedienungsanleitung

HP Vectra XU 6/XXX Bedienungsanleitung

HP Compaq dx2818 Microtower Bedienungs- und Wartungshandbuch

HP Pavilion a1000 - Desktop PC Bedienungsanleitung

HP Workstation xw6000 Bedienungsanleitung

Beliebte Desktop Handbücher anderer Marken

Asus

Asus E210 Series Bedienungsanleitung

Dell

Dell Inspiron 600m Bedienungsanleitung

Dell

Dell Inspiron 3662 Bedienungsanleitung

TotalFlow

TotalFlow uFLO Bedienungsanleitung

Logitech

Logitech MK320 Bedienungsanleitung

Dell

Dell XPS 730 H2C Bedienungsanleitung

Sony

Sony Vaio Series Bedienungsanleitung

Sony

Sony VGC-LT32E - Vaio All-in-one Desktop Computer Bedienungsanleitung

Alto

Alto MD 250 Bedienungsanleitung

Lenovo

Lenovo ThinkCentre Edge 72 Handbuch

Lenovo

Lenovo ThinkStation D20 Handbuch

Arbor Technology

Arbor Technology FPC-7800 Series Bedienungsanleitung

Sony

Sony VAIO VGX-TP1 Series Bedienungsanleitung

Asus

Asus Eee Box B204 Bedienungsanleitung

Dell

Dell Optiplex 9010 All In One Bedienungsanleitung

Everex

Everex eXplora Bedienungsanleitung

Lenovo

Lenovo ThinkCentre M75e Bedienungsanleitung

Dell

Dell Alienware Area-51 R4 Bedienungsanleitung

HP xw8600 - Workstation Bedienungsanleitung

Beliebte Desktop Handbücher anderer Marken