HP PS1810-8G Bedienungsanleitung

HP PS1810 Switch

Installation and Getting Started Guide

HP PS1810-8G (J9833A)

HP PS1810-24G (J9834A)

Power over Ethernet PD

HP PS1810 Switches

Installation and Getting Started Guide

The information contained herein is subject to change without notice.

This document contains proprietary information, which is protected by copyright. No part of this document may be photocopied,

reproduced, or translated into another language without prior written consent of Hewlett-Packard.

Manual Part Number

5998-4329

June 2013

Applicable Products

HP PS1810-8G (J9833A)

HP PS1810-24G (J9834A)

Safety

Before installing and operating this product, please read the “Installation precautions” in Chapter 2, “Installing the switch”, and the safety

statements in General Safety and Regulatory Information booklet included with the product.

Disclaimer

HEWLETT-PACKARD COMPANY MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in

connection with the furnishing, performance, or use of this material.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and

services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors

or omissions contained herein.

Hewlett-Packard assumes no responsibility for the use or reliability of its software on equipment that is not furnished by Hewlett-Packard.

Warranty

For the latest license and warranty information, see www.hp.com/support/networking-warranties.

For a copy of the warranty terms specific to your HP products, contact an HP authorized dealer or the HP Sales and Service Office in

your country/region.

Contents

1 Switch overview

Switch hardware description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2

Network ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3

LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4

Reset button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Clear button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Power connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5

Switch features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6

2 Installing the switch

Included parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1

Installation precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3

Installation procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-4

1. Prepare the installation site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

2. Mount the switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-5

3. Connect the network cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-14

4. Power on the switch and verify that self-test completes normally . . . . 2-15

SFP installation notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-18

Connections to HP ProLiant Gen8 Servers . . . . . . . . . . . . . . . . . . . . . . . . 2-19

3 Configuring the HP PS1810 Switches

Initial configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1

Managing the switch via the 192.168.2.10 address . . . . . . . . . . . . . . . . . . . . . . 3-3

Restoring DHCP addressing to the switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4

Next steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5

4 Troubleshooting

Basic troubleshooting tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1

Diagnosing with the LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Diagnostic tips: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2

Testing the switch by resetting it . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

Restoring to factory defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4

HP Customer Support Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

Before calling support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5

A Specifications

Switch Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Physical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-1

Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Acoustics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-2

Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3

Cabling and Technology Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4

Cabling Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-4

Technology Distance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-5

Mode Conditioning Patch Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

Installing the Patch Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-6

Twisted-Pair Cable/Connector Pin-Outs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-8

Straight-through Twisted-Pair Cable for

10 Mb/s or 100 Mb/s Network Connections . . . . . . . . . . . . . . . . . . . . . . A-10

Crossover Twisted-Pair Cable for

10 Mb/s or 100 Mb/s Network Connection . . . . . . . . . . . . . . . . . . . . . . . A-11

Straight-Through Twisted-Pair Cable for

1000 Mb/s Network Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-12

B EMC Regulatory Statements

Regulatory Statements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-1

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Index-1

1-1

Switch overview

The PS1810-8G and PS1810-24G switches are multiport managed gigabit switches

that enable you to build high-performance switched workgroup networks and to work

with HP ProLiant Gen8 Servers. These switches are store-and-forward devices that

offer low latency for high-speed networking.

Throughout this manual, these switches are referred as the PS1810-8G and PS1810-

24G Switches.

■The PS1810-8G Switch has 8 auto-sensing 10/100/1000BASE-T RJ-45 ports.

Port 1 is a Power over Ethernet Powered Device (PoE PD) port. The switch can

be powered by a network connection to port 1 from PoE power sourcing

equipment (PSE), such as a PoE switch.

■The PS1810-24G Switch has 24 auto-sensing 10/100/1000BASE-T RJ-45 ports

and two SFP slots (ports 25 and 26) for supported HP SFP fiber-optic

transceivers.

■The PS1810-8G switch has a unique enclosure that allows physical stacking on

the HP ProLiant MicroServer Gen8 product.

You can connect these switches directly to computers, printers, and servers to provide

dedicated bandwidth to those devices, and you can build a switched network

infrastructure by connecting these switches to hubs, other switches, or routers. The

PS1810 switches have the built-in technology that reports real-time health status for

each Gen8 Server in the network. In addition, these switches offer limited network

management capabilities as well.

1-2

Switch overview

Switch hardware

HP PS1810-8G (J9833A)

Link/Act and Speed LEDs

10/100/1000BASE-T RJ-45 ports1

Fault LEDs

Reset and Clear buttons

PoE PD port

1 All RJ-45 ports have the Auto-MDIX feature.

Power

LEDs

Power connector

PD Status

LEDs

1 All RJ-45 ports have the Auto-MDIX feature.

HP PS1810-24G (J9834A)

Link/Act and Speed LEDs

10/100/1000BASE-T RJ-45 ports1SFP slots

Power, Fault, and

Locator LEDs

Reset and Clear buttons

The back of the PS1810-24G has the AC power connector.

1-3

Switch overview

Switch hardware

Network ports

■Auto-sensing 10/100/1000BASE-T ports.

These ports support the “Auto-MDIX” feature, a feature that allows you to use

either straight-through or crossover twisted-pair cables to connect network

devices to the switch.

■PoE PD port (PS1810-8G Switch only)

A network connection to the PoE PD port from a PoE PSE device can provide

power to the switch.

■SFP slots for fiber or copper uplinks (PS1810-24G Switch only). SFPs support

the following network connectivity:

Optional Network Connectivity, Speeds, and Technologies

Speed Technology Cabling SFP Connector1

100 Mb/s 100-FX Fiber (multimode) LC

1 Gbps

1000-T Copper (twisted-pair) RJ-45

1000-SX Fiber (multimode) LC

1000-LX Fiber (multimode or single mode) LC

1To get information about the supported transceivers, see www.hp.com/networking/

support.

1. In the Auto Search textbox, type J4858 (for 100-Mb and Gigabit information).

2. Select one or more products that are displayed in the list. Click Display selected.

3. Click Product support information. The support page opens. In the support page, click

Manuals and find the Transceiver Support Matrix.

For technical details of cabling and technologies, see "Cabling and Technology Information"

in Appendix A.

1-4

Switch overview

Switch hardware

LEDs

The front and back panels of the switches provide status LEDs for system monitoring.

The following table lists the functions of the various indicators.

LED State Meaning

Power

(green)

On The switch is receiving power.

Off The switch is not receiving power.

Fault

(orange)

On On, after the switch is powered on or reset, at the beginning of switch self test. If

the LED remains on, it indicates a detected hardware failure during the self test.

Blinking* Indicates a fault condition on the switch or one of the switch ports. The Link LED

for the port with the fault blinks simultaneously.

Off The normal state; indicates that there are no fault conditions on the switch.

Locator

(blue)

PS1810-24G

Switch only

Blinking** The Locator LED helps you locate a specific switch in an area full of switches. The

LED blinks for 30 minutes when activated through the switch software.

Off The Locator LED is disabled by default.

(green)

PS1810-8G

Switch only

On Power is available on the PoE In port (Port 1).

Blinking* Power is no longer available on the PoE In port. The switch is powered from the

external power adapter. The LED continues to blink until power is restored on the

PoE In port or the switch is reset.

Off Power is not available on the PoE In port.

Link/Act

(green)

On The port is enabled and receiving a link indication from the connected device.

Off One of these conditions exist:

• An active network cable is not connected to the port.

• The port is not receiving link beat or sufficient light.

• Green Mode is enabled.

Blinking* Indicates that there is network activity on the port.

Spd

(green)

On Indicates the port is operating at 1000 Mb/s.

Blinking Indicates the port is operating at 100 Mb/s.

Off Indicates the port is operating at 10 Mb/s.

* The blinking behavior is an on/off cycle once every 1.6 seconds, approximately.

** The blinking behavior is an on/off cycle once every 0.8 seconds, approximately.

Andere Handbücher für PS1810-8G

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HP Netzwerk-Router Handbücher

HP MSR20-1X Series Bedienungsanleitung

HP HP 830 Series Bedienungsanleitung

HP 6125XLG Bedienungsanleitung

HP FlexNetwork MSR3064 Bedienungsanleitung

HP IntelliJack NJ1000G Bedienungsanleitung

HP HP 2530 Bedienungsanleitung

HP A-MSR Series Bedienungsanleitung

HP ProCurve 1600M Bedienungsanleitung

HP Compaq Presario,Presario 650 Bedienungsanleitung

HP ProCurve 1410-24G Bedienungsanleitung

HP Pavilion 8800 - Desktop PC Bedienungsanleitung

HP 5120 EI Series Bedienungsanleitung

HP ProCurve Secure 7102dl Bedienungsanleitung

HP MSR SERIES Installationshandbuch

HP MSR2000 Series Bedienungsanleitung

HP 5500 si series Bedienungsanleitung

HP MSR2000 Series Bedienungsanleitung

HP ProCurve Networking J8453A Bedienungsanleitung

HP FlexFabric 12500E Bedienungsanleitung

HP N1200 - StorageWorks Network Storage Router Handbuch

HP FlexNetwork MSR2003 Bedienungsanleitung

HP StorageWorks Edge Switch 2/12 Bedienungsanleitung

HP MSR1003-8S Bedienungsanleitung

HP ISCSI SR2122 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise