HP StoreOnce 2900 Handbuch

Read Me First

for the ProCurve Series 2900 Switches – Software Version T.11.xx or

greater

Contents

About Your ProCurve Series 2900 Switch Manual Set. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 1

View or Download the Software Manual Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 2

Software Updates Are Free! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 2

Your Free Ticket to Proactive Networking!. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 3

Mini-GBIC Operation Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .page 3

About Your ProCurve Series 2900 Switch Manual Set

The switch manual set includes the following:

Document Available on the

ProCurve web site

Shipped With

the Switch

Read Me First (this document)1 Yes Yes

Installation and Getting Started Guide1 Yes Yes

Management and Configuration Guide1Yes No3

Advanced Traffic Management Guide1Yes No3

Access Security Guide1, 2 Yes No3

Release Notes (for software updates) 1, Yes No3

1The latest edition is always available in PDF format and downloadable at the ProCurve Web site,

www.procurve.com.

2The Access Security Guide provides information on configuring the switch security features:

• Local Manager and Operator Passwords

• TACACS+ Authentication

• RADIUS Authentication and Accounting

• Secure Shell (SSH) Authentication

• Port-Based Access Control (IEEE 802.1x)

• Per-Port Security

• Authorized IP Managers

Please see the Access Security Guide for your switch on the ProCurve Web site, www.procurve.com.

3Please refer to “View or Download the Software Manual Set” on page 2.

View or Download the Software Manual Set

The printed Quick Install Guide shipped with your ProCurve product describes installing, minimally config-

uring, and troubleshooting. For further software feature and configuration information, please visit the ProCurve

Web site, where you can freely view or download the latest software manuals for your product. To do so:

1. Go to www.procurve.com.

2. To display the list of downloadable manuals, click on the following links:

Technical support

Product manuals (all)

ProCurve Switch 2900 Series.

(You may want to bookmark this Web page for easy access in the future.)

You can also register on the My ProCurve portal to receive the complete set of ProCurve switch manuals on

CD-ROM. To register and request a CD (or download an ISO image of the manual set), go to www.procurve.com

and click on My ProCurve. After registering and entering the portal, click on My Manuals.

Software Updates Are Free!

ProCurve Networking provides free software updates on the ProCurve Web site for your

Switch. To access the software updates, go to the ProCurve Web site at

www.procurve.com, then click on Software updates to go to the “ProCurve Networking

software updates” page. Under Latest software click on Switches to go to the page that has

the free download for your switch.

(To migrate the switch to the ProCurve Premium Edge Software feature set, it is necessary

to purchase and install a Premium Edge license. Refer to the “Premium Edge Switch

Features”, above.)

software updates” page, you can also register yourself to automatically receive email notice of new updates for

your managed ProCurve networking products.

To determine whether you have the latest software, you can compare the software version that is available on

the web site with the version that is currently installed on your switch. Follow the instructions below to

determine the current software version on your switch.

To Determine the Current Software Version in Your Switch. For the Series 2900 Switches, use any of the

following methods to view the software version:

■Start a console session with the switch. In the console login screen (the first screen displayed), the

Firmware revision line under the switch name shows the software version.

■If you already have a console session going, at the prompt enter the show version command. The

resulting display lists the current software version.

■In the web browser interface, click on the Identity tab. The current software version is listed as the

revision number in the Version line.

Your Free Ticket to Proactive Networking!

ProCurve Manager is a breakthrough in network management software that gives you more network with less

work. The ProCurve Manager CD is included at no extra charge with your ProCurve Switch. See the system

requirements printed on the sleeve containing the ProCurve Manager CD.

Mini-GBIC Operation Notes

Revision “B” mini-GBICs only. This product requires ProCurve revision “B” or later mini-GBICs (product

number ends with the letter “B”, for example J4858B, J4859B). These switches do not support revision “A” mini-

GBICs.

Use only genuine ProCurve mini-GBICs. Non-ProCurve mini-GBICs are not supported. Use of genuine

products ensures that your network maintains optimal performance and reliability. Should you require additional

ProCurve mini-GBICs, please contact a ProCurve sales representative or an authorized reseller.

Hot Swapping mini-GBICs. The Gigabit-SX, Gigabit-LX, Gigabit-LH, and 1000Base-T mini-GBICs that you can

install in your ProCurve switch can be “hot swapped”—removed and installed after the switch is receiving power.

You should disconnect the network cables from the mini-GBICs before hot swapping them.

When you replace a mini-GBIC with another mini-GBIC of a different type and then execute the write memory

command in the switch console, the switch configures the port on the new mini-GBIC with the default mode

(speed and duplex) settings used for new mini-GBIC type. The default mode for the Gigabit-SX, Gigabit-LX,

Gigabit-LH, and 1000Base-T mini-GBICs is Auto. Note that the switch retains other port-specific configuration

settings, such as trunking, Spanning Tree Protocol (STP), and VLAN values that were configured for the previous

mini-GBIC.

Connecting the mini-GBICs to Devices with Fixed Configurations. For some older network devices,

including some older ProCurve devices, the default for the Gigabit-SX, Gigabit-LX, and Gigabit-LH ports is a

fixed configuration, for example 1000 Mbps/Full Duplex, or is otherwise different from these default configura-

tions for the mini-GBICs, which is Auto. As a result, those devices may not connect properly to your mini-GBIC

port; you will not get a link. Because of these default configuration and full-duplex considerations, for best

operation, you should make sure that the devices connected to the mini-GBIC ports are also configured to Auto.

At a minimum, make sure the configurations match.

information contained herein is subject to change

without notice.

Part Number: 5991-4748

July 2006

Printed in Singapore

*5991-4748*

Inhaltsverzeichnis

Andere HP Netzwerk-Router Handbücher

HP StorageWorks 6100 - Enterprise Virtual Array Bedienungsanleitung

HP A5500 EI Switch Series Installationshandbuch

HP MSR SERIES Installationshandbuch

HP 6125XLG Bedienungsanleitung

HP StorageWorks SR2122 Bedienungsanleitung

HP MSR93x Series Bedienungsanleitung

HP MSR2000 Series Bedienungsanleitung

HP StorageWorks MPX200 Gebrauchsanweisung

HP J2600A Bedienungsanleitung

HP ProCurve Secure Router 7203dl J8753A J8753A Montageanleitung

HP ProCurve 2510G Series Bedienungsanleitung

HP ProCurve Networking J8454A Bedienungsanleitung

HP MSR SERIES Bedienungsanleitung

HP FlexNetwork MSR3012 Bedienungsanleitung

HP A5830 Series Bedienungsanleitung

HP J4093A Bedienungsanleitung

HP MSR2000 Series Bedienungsanleitung

HP a-msr Bedienungsanleitung

HP StorageWorks MPX200 Programmierhandbuch

HP FlexNetwork HSR6600 Bedienungsanleitung

HP StorageWorks N1200-320 Bedienungsanleitung

HP FlexFabric 12500E Bedienungsanleitung

HP A-MSR900 Series Montageanleitung

HP 5900 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise