HP D6030A - NetServer - E50 Bedienungsanleitung

Getting Started With

Stac®Replica™ Backup

for HP SureStore Tape

September 1999

Notice

The information contained in this document is subject to change without notice.

Hewlett-Packard makes no warranty of any kind with regard to this

material, including, but not limited to, the implied warranties of

merchantability and fitness for a particular purpose. Hewlett-Packard shall

not be liable for errors contained herein or for incidental or consequential

damages in connection with the furnishing, performance, or use of this material.

Hewlett-Packard assumes no responsibility for the use or reliability of its software

on equipment that is not furnished by Hewlett-Packard.

This document contains proprietary information that is protected by copyright.

All rights are reserved. No part of this document may be photocopied,

reproduced, or translated to another language without the prior written consent of

Hewlett-Packard Company.

Novell NetWare®is a registered trademark of Novell, Inc. Microsoft®Windows

NT and NTAS®are registered trademarks of Microsoft Corporation. Windows®

and Windows 95®are registered trademarks of Microsoft in the U.S. and other

countries. Stac®is a registered trademark of Stac Corporation. Replica™ is a

trademark of the Stac Corporation.

Hewlett-Packard Company

Technical Communications/MS 45SLE

Network Server Division

10955 Tantau Avenue

Cupertino, CA 95014 USA

iii

Contents

1 Quick View................................................................................................... 1

2 Introduction................................................................................................. 3

The Replica Solution for Server Backup........................................................ 3

What Version of Software Do I Have?....................................................... 3

For More Information About Replica.......................................................... 4

Online Help............................................................................................... 4

3 Installing Replica......................................................................................... 5

Installing Replica for Windows NT................................................................. 5

What You Need......................................................................................... 5

Creating a Drivers Diskette........................................................................ 6

Installing the Replica Drivers and Software................................................ 6

Installing Replica for NetWare....................................................................... 9

What You Need......................................................................................... 9

Determining the Version of Replica to Install ........................................... 10

Installing Replica for Novell NetWare 4.2................................................ 11

Finishing the Installation.......................................................................... 12

Verifying the Replica Installation.................................................................. 12

Installing TapeAssure for HP T20 Tape Drive Verification and Diagnostics.. 13

4 Backing Up Your Data............................................................................... 15

Using Replica Shortcuts.............................................................................. 15

Creating a Backup Configuration (Windows NT).......................................... 16

Creating a Backup Configuration (NetWare)................................................ 22

Performing an Immediate Backup ............................................................... 27

Disaster Recovery Feature on the Single Server Edition.............................. 28

5 Restoring Files and Folders ..................................................................... 29

Restoring Files (Windows NT)..................................................................... 30

Restoring Files (NetWare)........................................................................... 33

Dismounting the Tape Volume..................................................................... 37

Optimizing Replica File Protection............................................................... 38

Disaster Recovery Feature on the Single Server Edition.............................. 38

Recovering a System Volume When You Don’t Have Disaster Recovery.... 38

Manually Recovering a Windows NT System Volume ............................. 38

Contents

Manually Recovering a NetWare System Volume ................................... 39

6 Caring For Your Tape Drive...................................................................... 41

Care of the Tape Drive................................................................................ 41

Choosing Tapes for Your Tape Drive........................................................... 41

Erasing Tapes......................................................................................... 42

Inserting and Removing Tape Cartridges..................................................... 42

Write-Protecting a Tape Cartridge............................................................... 44

Caring for Your Tape Cartridges.................................................................. 45

Operating Conditions............................................................................... 45

Storing Tape Cartridges........................................................................... 45

Ordering Information ................................................................................... 46

A Tape Drive Specifications......................................................................... 47

Interface.................................................................................................. 47

Backup Speed......................................................................................... 47

Tape Format ........................................................................................... 47

Reliability Specifications.......................................................................... 47

Power Requirements............................................................................... 48

Physical Specifications............................................................................ 48

B Software License, Warranty, and Support............................................... 49

HP Software License Agreement................................................................. 49

Warranty................................................................................................. 50

Technical Support ................................................................................... 50

Index............................................................................................................... 51

1 Quick View

This chapter provides a summary table for quickly finding procedures in this

Getting Started guide. If you are an experienced network administrator, you can

also use the table as a quick reference guide to the procedures in the document.

Shortcut

icon Task For more information

Install Replica

1. Prepare to install Replica. See Chapter 3 for a list of

requirements for installing Replica

under Windows NT or NetWare.

2. Install the Replica software. See Chapter 3 for instructions on

installing Replica under Windows

NT or NetWare.

Configure Replica for automatic backups

1. From the desktop icon or Start menu,

open the Configuration Wizard

shortcut.

The Wizard walks you through the

configuration procedure, prompting

you to select a tape drive, choose

drive volumes for backup, and

schedule a time for the backup.

See Chapter 4 for detailed

instructions on configuring a

backup under Windows NT or

NetWare.

Perform an "off-schedule," immediate backup

1. Insert a blank tape cartridge in the

HP NetServer tape drive. See Chapter 4 for detailed

instructions on performing an

immediate backup under Windows

NT or NetWare.

2. From the desktop icon or Start menu,

open the immediate backup

shortcut.

Replica immediately begins backing

up the volumes designated in the

configuration.

Chapter 1 Quick View

Shortcut

icon Task For more information

Restore files and folders from a mounted tape

1. Insert the backup tape cartridge

in the tape drive.

2. From the desktop icon or Start

menu, open the restore files

shortcut.

Replica starts and immediately

displays the Mount Tape

window.

See Chapter 5 for detailed

instructions on restoring files and

backup under Windows NT or

NetWare.

3. Prepare for mounting by

selecting a tape drive, choosing

the volume to restore, and

assigning a drive ID to the tape.

4. Click the Mount button.

5. Once the volume is mounted, use

the Explorer or File Manager to

copy the recovered files or

folders to other disk volumes.

2 Introduction

This guide helps you protect the valuable data stored on your HP NetServer using

your Stac Replica backup software.

The guide tells you how to install, set up, and use the software. It also provides

instructions for caring for your HP SureStore tape drive and tells you where to

find information on performing tape diagnostics.

The Replica Solution for Server Backup

With Stac Replica for HP SureStore Tape, you get a powerful backup program

that makes file backup as easy as pressing a button.

Designed for ease-of-use, Replica provides desktop shortcuts that allow you to

quickly configure automatic daily backups, perform immediate backups, and

restore files and folders from your backup tape--without special training or

expertise.

The HP SureStore Tape edition of Replica includes a Configuration Wizard that

walks you through the process of setting up a default configuration that

automatically backs up designated volumes at the same time, every day. All you

have to do is make sure that a tape cartridge is inserted in the server’s HP

SureStore tape drive.

Replica also provides a desktop shortcut for performing one-step, unscheduled

backups any time you wish. Opening the shortcut starts an immediate backup of

the same volumes you designated for backup with the Configuration Wizard.

Once the server data is backed up, it is just as easy to restore lost or damaged

files by mounting the appropriate backup tape as a volume that your server

recognizes as a removable drive. After the tape is mounted, you can use the

familiar Windows Explorer, or File Manager to copy the files to the desired

location.

What Version of Software Do I Have?

Stac Replica for HP SureStore Tape contains device drivers for both the T20 and

T4 tape devices. It is available in two editions:

•The CD-ROM for product number C4396A is titled "HP SureStore Tape,

Backup & Disaster Recovery, Replica Single Server for HP SureStore

Tape." This edition provides a complete disaster recovery feature.

Chapter 2 Introduction

•The CD-ROM for product number C4394A is titled "HP SureStore Tape

Server/PC Workstation Backup, Replica Backup for HP SureStore Tape,

HP Colorado Backup II." This version of Replica does not have the

disaster recovery feature.

If you have product C4394A, and want to upgrade to the version of Replica that

contains the disaster recovery feature, contact your HP representative and order

HP product number C4396A.

For More Information About Replica

This document describes the basic features of your Stac Replica backup software.

Electronic versions (in Adobe Acrobat PDF format) of the Replica for SureStore

Tape User’s Guide are stored on your HP SureStore Tape CD-ROM. Available

for both Windows NT and NetWare versions of the product, the document

provides a comprehensive guide to Replica, including more advanced backup and

restore options.

Each guide is available in four languages: English, French, German, and

Spanish.

The PDF versions of the Replica for SureStore Tape User’s Guide, Windows NT

Edition are stored on the HP SureStore Tape CD-ROM under the following

pathnames:

English \stac\eng_nt\manual.pdf

French \stac\fre_nt\manual.pdf

German \stac\ger_nt\manual.pdf

Spanish \stac\spa_nt\manual.pdf

The PDF versions of the Replica for SureStore Tape User’s Guide, NetWare

Edition are stored on the HP SureStore Tape CD-ROM under the following

pathnames:

English \stac\eng_nw\manual.pdf

French \stac\fre_nw\manual.pdf

German \stac\ger_nw\manual.pdf

Spanish \stac\spa_nw\manual.pdf

Online Help

Replica provides extensive online help. The online documentation provides

information on screens and dialog boxes, as well as procedural instructions for

Replica operations.

3 Installing Replica

This chapter provides instructions for installing Stac Replica drivers and software

under Windows NT or NetWare. Review the section that applies to the operating

system running on your HP NetServer before starting the Replica installation.

Installing Replica for Windows NT

This section provides instructions for installing Replica and its related files on an

HP NetServer running Windows NT. If you are installing Replica on an HP

NetServer running NetWare, skip to the "Installing Replica for NetWare" section

later in this chapter.

NOTE For best results, always close any applications running on the

HP NetServer before starting the Replica installation.

What You Need

Before you can install Replica and begin backing up server files, you need the

following:

•An HP NetServer running Windows NT Server 3.51, Windows NT

Server 4.0, or Microsoft Small Business Server

•At least 32 MB RAM

•At least 8 MB free disk space on the boot drive, or on the drive that

contains the system folder

•At least one configured HP SureStore T20 tape drive and a blank tape

cartridge (provided with your server)

•A system console connected to the network and running the TCP/IP or

IPX/SPX communications protocol, which allows the Replica service to

communicate with the Windows application

•Administrator privileges for server access

Chapter 3 Installing Replica

Creating a Drivers Diskette

If you don’t have an HP NetServer Windows NT drivers diskette, you may need to

create one before you can install the T20.

NOTE You do not need to create a drivers diskette if you installed

NT 4.0 using HP Installation Assistant. Installation Assistant

automatically copied the T20 device drivers to

C:\HP\DRIVERS\T20. It automatically copied the files

necessary to install the Stac Replica backup software to

C:\I386\$OEM$\STAC.

You can create your drivers diskette using an HP NetServer or a Windows-based

PC.

To create the drivers diskette from an HP NetServer:

1. Boot the HP NetServer from the HP NetServer Navigator CD-ROM.

2. Click the NetServer Utilities button; then click Diskette Library.

3. Select your NOS version and follow the on-screen instructions for placing

the drivers on a diskette.

To create the drivers diskette from a Windows-based PC:

1. Boot the PC if you have not already done so.

2. Insert the HP NetServer Navigator CD-ROM. The Diskette Library screen

appears.

3. Select your NOS version and follow the on-screen instructions for placing

the drivers on a diskette.

Installing the Replica Drivers and Software

The installation instructions are slightly different for Windows NT 4.0 and

Windows NT 3.51. Please follow the appropriate instructions.

If your HP NetServer is running Windows NT 4.0 or Microsoft BackOffice

Small Business Server:

To add the T20 device driver and install Replica:

1. Log in to the HP NetServer as Administrator.

2. Open the Tape Devices icon in the Control Panel group.

Andere Handbücher für D6030A - NetServer - E50

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HP Software Handbücher

HP e-diagtools 3.5x Bedienungsanleitung

HP HPE XP P9500 Bedienungsanleitung

HP SN3000B Bedienungsanleitung

HP Spooler FASTP Bedienungsanleitung

HP AJ765A - StorageWorks RDX Removable Disk Backup... Bedienungsanleitung

HP AK373A - StorageWorks All-in-One Storage System 1200r 5.4TB SAS Model NAS... Anleitung zur Verwendung

HP P Class 450/500/550/600/650/700/750 Bedienungsanleitung

HP T6553 D45 Bedienungsanleitung

HP Data Protector A.06.1x Installationsanleitung

HP 418800-B21 - StorageWorks Modular Smart Array 70 Storage... Installationshandbuch

HP T5720 - Compaq Thin Client Bedienungsanleitung

HP StorageWorks 8B - FC Entry Switch Bedienungsanleitung

HP NonStop SSH 544701-014 Bedienungsanleitung

HP C7791C - DesignJet 130 Color Inkjet Printer Konfigurationshandbuch

HP BB118BV - StorageWorks Data Protector Express... Bedienungsanleitung

HP HP-UX 11i Service-Handbuch

HP T5145 - Thin Client - Tower Service-Handbuch

HP ProBook 4325s - Notebook PC Bedienungsanleitung

HP StorageWorks 8B - FC Entry Switch Bedienungsanleitung

HP Integrity BL890c - i2 Server Bedienungsanleitung

HP HPE XP P9500 Bedienungsanleitung

HP StorageWorks 4/8 - SAN Switch Bedienungsanleitung

HP T5725 - Compaq Thin Client Bedienungsanleitung

HP HP 2605dn Print Drivers Service-Handbuch

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Novell

Novell GROUPWISE 8 - INTERNET AGENT Bedienungsanleitung

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung

Novell

Novell SP2 - S Bedienungsanleitung