Novell SP2 - S Bedienungsanleitung

Release Notes for SUSE Linux

Enterprise Server 10 Service Pack 2

Release Notes for SUSE Linux Enterprise Server 10 Service Pack 2

Version 10.2.1, 13. May 2008

Abstract

These release notes are generic for all SUSE Linux Enterprise Server 10 based products. Some parts may not apply

to a particular architecture/product. Where this is not obvious, the respective architectures are listed explicitly. The

instructions for installing this Service Pack can be found in the README file on CD1. There are also translations of

this file.

A startup and preparation guide are found under the docu directory on the media. Any documentation (if installed)

can be found below /usr/share/doc/ in the installed system.

This Novell product includes materials licensed to Novell under the GNU General Public License (GPL). The GPL

requires that Novell make available certain source code that corresponds to those GPL-licensed materials. The source

code is available for download at http://www.novell.com/linux/source. Also, for up to three years from Novell's

distribution of the Novell product, upon request Novell will mail a copy of the source code. Requests should be sent by

e-mail to [email protected] or as otherwise instructed at http://www.novell.com/linux/source. Novell

may charge a fee to recover its reasonable costs of distribution.

1. Purpose ......................................................................................................................... 1

2. New Features ................................................................................................................. 2

3. Driver Updates ............................................................................................................... 6

3.1. Network Drivers ................................................................................................... 6

3.2. Storage Drivers .................................................................................................... 6

3.3. Other Drivers ....................................................................................................... 7

4. Other Updates ................................................................................................................ 8

5. Installation-Related Notes ............................................................................................... 10

6. Update-Related Notes .................................................................................................... 12

6.1. General Notes .................................................................................................... 12

6.2. Update from SUSE Linux Enterprise Server 10 SP1 .................................................. 12

6.3. Update from SUSE LINUX Enterprise Server 9 ....................................................... 13

7. Technology Previews ..................................................................................................... 16

8. Deprecated Functionality ................................................................................................ 18

9. Known Issues ............................................................................................................... 19

10. Resolved Issues ........................................................................................................... 22

11. Technical Informations ................................................................................................. 23

12. More Information and Feedback ..................................................................................... 25

Chapter 1. Purpose

This SUSE Linux Enterprise Server 10 Service Pack 2 serves several purposes:

• Provide enhancements to the SLES 10 code base (see Chapter 2, New Features).

• Provide all maintenance fixes (see Chapter 3, Driver Updates) released since GA of SLES 10.

• Provide an easy update (see README) of your system or individual packages to the latest Service Pack

level. This is especially useful if you cannot use online update mechanisms.

• Provide an easy fresh install (see README) using the latest kernel, drivers, and installer updates.

• Include PTFs (special fixes for customers) which were folded back into the SLES 10 common code

base making them part of the maintained code base.

• Provide useful additional information and documentation (see Chapter 5, Installation-Related Notes).

Through joint testing and maximum care, we try hard not to break any ISV certification with a Service

Pack, but we recommend checking with your ISV about your application's certification status.

With the release of SUSE Linux Enterprise Server 10 Service Pack 2, the now obsoleted Service Pack 1

enters limited support status for the following 6 months, during which time Novell will continue to provide

security updates and L3 support to maintain its customer's operations safe during the migration window.

At the end of the six-month parallel support period, on November, 15th 2008, support for Service Pack

1 will be permanently discontinued.

Chapter 2. New Features

• 915resolution was added to change the resolution of the 845G, 855GM, 865G, 915G, 915GM, 945G,

945GM, 965G and 965GM chipsets

• Docking station support for Santa Rosa chipsets were added

• Complete iSCSI support was added to autoyast2

• Add support for --dynamic-list, AMDFAM10h, SSE5 and all POWER6 instructions to binutils

• Updated crash to version 4.0-4.8 and increased the number of supported CPUs to 16384

• Added support of dhcpFailOverPeer objects to dhcp

• Allow online resize of root filesystem on Ext3

• Enable krb4 support in evolution

• eDirectory NMAS support was added to FreeRADIUS

• Added optional SSE5 instructions to gcc

• Full RFC3484 (getaddrinfo/IPv6) support, AF_IUCV and support for up to 4096 CPUs added to glibc

• Added 'start this script before' support to insserv

• Added kdump package and YaST2 frontend with support for saving dumps over network and to filter

kdump images.

• When doing a network install, check if the IP address of the machine to be installed is already in use

by another machine. This check can be suppressed with parameter "forceip=1" either on the command

line or in the configuration file.

• Added support for LUKS and LVM over iSCSI to mkinitrd

• New PAM module 'pam_faildelay' was added to change the delay on failure per application

• Added sblim-cim-client, a CIM Client Class Library for Java applications

• Added StrongSwan 4.1.10, an OpenSource IPsec-based VPN Solution for Linux

• Added support for SGS Thomson Microelectronics Fingerprint Reader including a YaST2 module for

configuration

• Added audit support to hwclock

• iSNS support was added to the YaST2 iSCSI modules

• Support for bridge devices, ficon devices and VLANs was added to the YaST2 network module

• The default disk label for disks larger than 2 TB is now GPT

• It is now possible to install on NFS as root partition

• The YaST2 storage module is now able to online resize ext3

• Python bindings for YaST2

New Features

• The maximum number of raw devices can be specified as boot option (max_raw_minors=XX, where

1 <= XX <= 65536)

• Add a new kernel which is designed to run on top of a virtual machine interface layer (VMI). The

VMI interface layer is part of the package kernel-vmi which is available as x86 package only (not for

x86_64). This package can be installed via your favorite update tool once the system has a registered

update channel.

• A hardware handler for the DM-MPIO framework to enable explicit ALUA support (ALUA: T10

Asymmetric LUN Access or T10 ALUA) was added.

• Support for Autofs version 5 was added additional to the standard version 4.

• The Open-iSCSI stack was updated to enhance the iSCSI boot/install capability so that it is not limited

to a single integrated network interface any more. This update changed the sysfs layout.

• Support added for SB700 S/PATA

• Integrated support for AMDFam11h (Griffin)

• Integrated support for NFS locking of a clustered filesystem

• Support for mount counting and last check timestamping for fsck -a on reiserfs was added.

• AppArmor was updated to the latest version.

• Wide UTF-8 character support was enabled for Aspell.

• The following packages were added for better support of XEN management tools: gtk-vnc, virt-viewer

• The HPI STONITH module of heartbeat was enabled.

• Support for Intel(R) iAMT was added.

• IPA Fonts were added.

• The Firmware for Intel Wireless WiFi Link 4965AGN Cards was added.

• Added Unicode text editor 'yudit' to edit and convert text of different languages.

• Improved support for LVM and Device-Mapper based mirroring.

• SuSEfirewall2 now autodetect bridge interfaces and permit traffic.

• zSeries: AF_IUCV Protocol Support: Enables IUCV communication via the BSD socket interface

between Linux VM guests or between a Linux guest and CMS. More info: Device Drivers, Features,

and Commands - SC33-8289-04, Chapter 21. AF_IUCV protocol support.

• zSeries: Kernel NSS support: Saves memory when running multiple Linux server with the same kernel

under z/VM by allowing to save the kernel in a Named Saved Segment in z/VM. More info: Device

Drivers, Features, and Commands - SC33-8289-04, Chapter 13. Shared kernel support.

• zSeries: ETR (external time reference) Support: Enables Linux images to synchronize with parallel

Sysplex or GDPS by providing z/OS compatible external timer reference and maintaining data

consistencygroupsforXRCdatamover.Moreinfo:TheETRsupportintroducesanewkernelparameter

"etr"thatisusedtosettheinitial state for theonlineattributeof the two ports.Thesyntaxof the parameter

is "etr=[on | off | port0 | port1]". The default is "off". The ETR support introduces a number of sysfs-

New Features

attributes. There are two time synchronization ports etr0 and etr1, which can be accessed via sysfs under:

/sys/devices/system/etr

• zSeries: Dynamic CHPID reconfiguration via SCLP: Allows to react to hardware changes and to

configure path for the LPAR from the Linux system. More info: Device Drivers, Features, and

Commands - SC33-8289-04, Chapter 2, Configuring a CHPID on LPAR and Chapter 32, chchp and

lschp.

• zSeries: skb scatter-gather support for large incoming messages: Improves network throughput and

reliability (avoid memory allocation failures in network subsystem) with large MTU sizes and jumbo

frames. In particular this renders HiperSockets highly available even for large messages.

• zSeries: FCP performance data collection - adapter statistics: Provides more hardware performance

metrics which are available from the FCP adapter on IBM System z9 and z10.

• zSeries: Support for Processor Degradation: Generates uevents for all CPUs if the CPU-capability

changes. This can happen e.g. because the CPUs are overheating. The CPU-capability can be read via:

/sys/devices/system/cpu/cpuN/capability. More info: Device Drivers, Features, and

Commands - SC33-8289-04, Chapter 2, CPU capability change.

• zSeries: Provide Linux process data into z/VM monitor stream: Allows to consolidate monitor data from

multiple z/VM guest with z/VM monitor tools. More info: Device Drivers, Features, and Commands

- SC33-8289-04, Chapters 4, 14, 15, 16 and 32 (mon_fsstatd and mon_procd).

• zSeries: z/VM unit record device driver: Allows to access the z/VM reader from a running Linux system,

useful for tasks like preparing the z/VM reader from Linux to install or to dump to the z/VM reader.

More info: Device Drivers, Features, and Commands - SC33-8289-04, Chapter 18. z/VM unit record

device driver.

• zSeries: STSI change for capacity provisioning: Make the permanent and temporary capacity

information as provided by the STSI instruction of the IBM System z10 available to user space via

/proc/sysinfo.

• zSeries: Hotplug daemon for CPU and memory management: New daemon in s390-tools 1.6.3 that

manages CPU- and memory-resources based on a set of rules. Depending on the workload CPUs can be

enabled or disabled. The amount of memory can be increased or decreased exploiting the Cooperative

Memory Management (CMM1) feature. See: man -a cpuplugd. More info: Device Drivers, Features,

and Commands - SC33-8411-00, Chapters 36 (cpuplugd - Activate CPUs and control memory Use).

• zSeries: HiperSockets MAC layer routing support: Enables Layer-2 support in HiperSockets, including

IPv6 for Layer-2, on the new z10 hardware. Note that connecting Layer-2 and Layer-3 hosts is not

supported. To use it, echo 1 > layer2 attribute before setting the HiperSockets device online.

• zSeries: Support two OSA ports per CHPID: Exploits the next OSA adapter generation offering two

ports within one CHPID, giving you four ports per card ("Four-port exploitation on OSA-Express3 GbE

SX and LX"). The additional port number 1 can be specified with the qeth sysfs-attribute "portno". More

info: Device Drivers, Features, and Commands - SC33-8411-00, Chapters 9 (Specifying the relative

port number).

• zSeries: In kernel and software Support for CP Assist Instructions AES & SHA: Enables the crypto

driver and library to exploit the new z10 hardware encryption providing performance enhancements for

AES-192, AES-256, SHA-384 and SHA-512.

• zSeries: Linux CPU Node Affinity: Improve performance of the system by scheduling processes to the

optimal node where the CPU is associated, exploiting the new z10 CPU node topology. More info:

Device Drivers, Features, and Commands - SC33-8411-00, Chapters 2 (Examining the CPU topology).

New Features

• zSeries: Large Page Support: Enables better system performance with large memory footprints like in

Java or database workloads by exploiting the new z10 hardware feature to be able to use large memory

pages (1 MB). See: Linux kernel source tree under Documentation/vm/hugetlbpage.txt. More info:

Device Drivers, Features, and Commands - SC33-8411-00, Chapters 28.

Chapter 3. Driver Updates

3.1. Network Drivers

• Added ipw3945 driver in version 1.2.0 and ipw3945d tools in version 1.7.22

• Added iwlwifi driver

• Added mac80211 wireless driver

• Updated Realtek r8169 driver to support newer chipsets

• Updated IPv6 stack for better Source Address Selection

• Updated tg3 driver to version 3.86b

• Added bnx2x 10 gigabit ethernet driver in version 1.42.3

• Updated bnx2 driver to version 1.6.7c

• Added ixgbe driver in version 1.1.21

• Updated e1000 driver to version 7.6.9.1

• Updated netxen driver to the one from upstream kernel version 2.6.23

• Updated qla3xxx driver to version 2.03.00-k4

• Added igb driver in version 1.0.8

• Added Chelsio 10GB driver (cxgb) in version 1.0

• Added Myricom 10G driver (myri10ge) in version 1.3.1

• Updated s2io driver to version 2.0.25.1

3.2. Storage Drivers

• Updated qla2xxx to version 8.02.00-k6

• Updated qla4xxx to version 5.01.02-d4

• Updated megaraid driver to version 2.20.5.2

• Updated megaraid_sas to version 3.15

• Updated 3w-9xxx to version 2.26.08.003 (9.5.0.1)

• Updated 3w-xxxx to version 1.26.02.002

• Updated aic7xxx to version 7.0

• Updated aic94xx driver to include SATA support for SAS

• Updated aacraid driver to version 1.1-5[2449]

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Novell Software Handbücher

Novell

Novell IDENTITY ASSURANCE SOLUTION 3.0.2 -... Bedienungsanleitung

Novell

Novell BUSINESS CONTINUITY CLUSTERING 1.1 SP1 - 9-21-2010 ADMINISTRATION GUIDE FOR OPEN ENTERPRISE SERVER 1 SP2... Bedienungsanleitung

Novell

Novell GROUPWISE 8 - SECURITY POLICIES Bedienungsanleitung

Novell

Novell CLIENT 1.0 FOR LINUX - README Bedienungsanleitung

Novell

Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - COMMAND LINE UTILITIES REFERENCE 10.3... Bedienungsanleitung

Novell

Novell GROUPWISE 8 - WEBACCESS Bedienungsanleitung

Novell

Novell ZENWORKS ENDPOINT SECURITY MANAGEMENT 3.5 Bedienungsanleitung

Novell

Novell GROUPWISE 7 - SECURITY POLICIES Bedienungsanleitung

Novell

Novell OPEN ENTERPRISE SERVER 2 SP2 - PLANING AND IMPLEMENTATION GUIDE... Bedienungsanleitung

Novell

Novell SUSE LINUX ENTERPRISE SERVER 10 STORAGE Bedienungsanleitung

Novell

Novell PLATESPIN ORCHESTRATE 2.0.2 - DEVELOPMENT CLIENT REFERENCE... Service-Handbuch

Novell

Novell GROUPWISE 7 - LIBRARIES AND DOCUMENTS Bedienungsanleitung

Novell

Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE... Kurzanleitung

Novell

Novell PLATESPIN ORCHESTRATE 2.0.2 - ADMINISTRATOR REFERENCE... Service-Handbuch

Novell

Novell GROUPEWISE 8 - SUPPORT PACK 2 05-2010 Bedienungsanleitung

Novell

Novell DATA SYNCHRONIZER MOBILITY PACK - UPDATE 2 Bedienungsanleitung

Novell

Novell EDIRECTORY 8.8 SP5 Kurzanleitung

Novell

Novell SENTINEL 6.1 SP2 - INSTALLATION GUIDE... Bedienungsanleitung

Novell

Novell Account Management 2.1 Bedienungsanleitung

Novell

Novell LINUX ENTERPRISE SERVER 11 - STORAGE ADMINISTRATION GUIDE... Bedienungsanleitung

Novell

Novell BUSINESS CONTINUITY CLUSTERING 1.2 -... Bedienungsanleitung

Novell

Novell ZENWORKS PATCH MANAGEMENT 6.4 SP2 - SERVER Bedienungsanleitung

Novell

Novell ZENWORKS PATCH MANAGEMENT 6.4 - AGENT Bedienungsanleitung

Novell

Novell LINUX ENTERPRISE SERVER 11 - VIRTUALIZATION Bedienungsanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

HP ProLiant BL420c Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung

Lexmark

Lexmark Apps Service-Handbuch