HP Deskjet 812c Bedienungsanleitung

HP StorageWorks

B-series Data Center Fabric Manager

Enterprise, Professional Plus, and

Professional

V10.3.4 Release Notes

Part Number: 5697-0436

Fifth edition: April 2010

Legal and notice information

Microsoft® and Windows® are U.S. registered trademarks of Microsoft Corporation.

Version

10.3.4

Description

HP StorageWorks B-series Data Center Fabric Manager (DCFM) is HP's next-generation fabric

management application and the successor to its legacy fabric management application, HP

StorageWorks Fabric Manager (FM).

New hardware platforms

DCFM 10.3.0 introduced support for the following new hardware platforms:

•HP StorageWorks 2408 FCoE Converged Network Switch (earlier versions only supported Discovery

for this switch)

•HP StorageWorks 1606 Extension SAN Switch

•HP StorageWorks DC SAN Director Multiprotocol Extension Blade

•HP StorageWorks DC SAN Director Switch 10/24 FCoE Blade

New software features

DCFM 10.3.0 introduced support for the following new software features:

•DCFM Professional Plus—A new product in the DCFM product line designed for medium-sized

businesses or departmental storage networks

•Uses the same binary as DCFM Enterprise, but with limited features and scalability

•Supports up to 4 fabrics and 2,560 switch ports

•Supports the same hardware platforms as DCFM Enterprise, with the exception of the HP

StorageWorks DC SAN Backbone Director

•Supports fabrics that contain only M-EOS switches

•Does not support FICON

•Can be upgraded to DCFM Enterprise with a license-key update

•Support for fabrics with only M-EOS switches by adding discovery functionality to M-EOS switches

•M-EOS V9.6.xor later is required for seed switch compatibility.

•An M-EOS seed switch with firmware earlier than V9.9.2 supports the following fabric member

information:

•Domain ID

•Switch WWN

•Topology

•An M-EOS seed switch with firmware V9.9.2 or later supports the following fabric member

information, in addition to the information supported by earlier versions:

B-series Data Center Fabric Manager Enterprise, Professional Plus, and Professional 3

•Switch IPv4 address

•Switch IPv6 address

•Firmware version running in the switch

•Switch model

•Vendor name

•Virtual Fabric ID (VF ID)

•FCoE and Converged Enhanced Ethernet (CEE) configuration management

•Basic Layer 2 configuration options

•CEE interface administration

•FCoE port

•Link Aggregation Group (LAG)

•Spanning Tree Protocol (STP)

•FCoE/CEE performance management

•Support for historical and real-time port statistics

•CEE 10GbE port statistics

•Tx/Rx percentage utilization and MB/s

•Received EOF

•Underflow error

•Overflow error

•CRC error

•Alignment error

•Run-time Errors

•Too-long error

•End-to-end HBA-to-switch group management

•Host-based Discovery (single-host, or multiple-host through IP list or CSV import, requires HCM

2.0 or later)

•Discovery of Brocade adapters (using JSON-RPC)

•Host-based topology views

•Server-to-HBA automatic mapping

•Properties

•Events integration

•Statistics collection and display

•End-to-end configuration (host and switch ports) for Fibre Channel-Security Protocol (FC-SP)

and trunking

•HBA SupportSave

•Deep element management configuration with HCM Launch-in-Context

•Server virtualization support

•Discovery of VMware ESX virtual machines (VMs) using APIs

•View virtual machines running on physical servers

•Display of VM properties, including end-to-end path from VM to LUN

Enhancements

B-series OUI support enhancement

In the first half of 2010, a new Organizationally Unique Identifier (OUI) began phasing into B-series

platforms. DCFM 10.3.4 adds support for this OUI. For more information, see “New OUI support on

B-series platforms”on page 11.

LDAP enhancements

•The administrator/root user has an option to select one of the following conditions in which the

DCFM Authentication falls back to the Secondary Authentication (Local DB):

•LDAP Servers are not reachable

•User not found in LDAP

Encryption enhancements

•All DCFM editions support the encryption switch and director encryption blade:

•DCFM Professional

•DCFM Professional Plus

•DCFM Enterprise

•Quorum card support

•System card support

•Added clustered key vault configuration for HP-SKM

•Key vault credentials support for SKM

FCIP enhancements

•Support for new features introduced with the HP StorageWorks 1606 Extension SAN Switch and

HP StorageWorks DC SAN Director Multiprotocol Extension Blade

•Comprehensive FCIP Tunnels Configuration dialog (replaces existing FCIP Tunnel wizard)

•Enhancements for Circuit Properties, Tunnel Properties, Connection Properties, Switch Properties,

Flyovers, and the Topology view

•Ability to view all tunnels discovered by DCFM across all fabrics

•Introduced Circuit Configuration for the tunnels in HP StorageWorks 1606 Extension SAN Switch

and HP StorageWorks DC SAN Director Multiprotocol Extension Blade

•Ability to view performance statistics of FCIP tunnels for HP StorageWorks 1606 Extension SAN

Switch and HP StorageWorks DC SAN Director Multiprotocol Extension Blade

FICON enhancements (Enterprise version only)

•Lossless DLS support in Configure Cascaded FICON Fabric and Merge wizard

•Cascaded FICON Fabric Merge wizard conflict resolution

•Data Field Size

•VC Priority

•Card Swap Function

•Allows you to swap a failed card with a new one

B-series Data Center Fabric Manager Enterprise, Professional Plus, and Professional 5

•Moves the port address and port index of ports on blades to new card

•After the swap is complete, enables all ports on the blades

•PDCM enhancements

•Now warns users when E-E and E-F port connections are prohibited

•Can provision the same PDCM updates to multiple switches

•Usability enhancement supports direct entry of row and column for allow/prohibit configuration.

•PDCM dialog–Changed from Modal to Non-Modal dialog

Reliability, availability, and serviceability enhancements

•DCFM SupportSave enhancements:

•Configure a user-determined interval at which SupportSaves are automatically captured from

specified switches

•Includes Brocade HBA SupportSave

•Increased the number of simultaneous switch SupportSave captures from 10 to 50

•Policy Engine improvement:

•Added an action to capture switch SupportSave in the Event Policy dialog

•Added a facility to register switches in upload failure data capture destination

•Added a facility to register DCFM as a trace dump destination

•Added Port Fencing policies for Class 3 frame drops

•Fault Management improvements:

•Receive syslog events from HBAs

•Increased the default value of the maximum number of events stored in the database from

10,000 to 20,000, with a maximum supported value of 50,000

•Added support to optionally back up the FTP folder, Technical Support folder, and Trace dump

folder

•System Monitor process improvement:

•Generates a Master Log event when memory usage is ≥80% and disk space usage is ≥90%

•Audit Log improvement:

•All important user actions generate application events

•Debug logging improvements:

•Log messages at the appropriate level to prevent the rollover of logs

•Increase default size of log files from 5 MB to 10 MB

•Isolate failures to small-grained tasks (for example, failure to collect one piece of data due to

errors will not prevent collection of remaining data)

•Include data source name to avoid ambiguity (multiple data collection sources)

Zoning enhancements

•Active Traffic Isolation (TI) zone enhancements:

•Active TI zone information is collected by DCFM and persisted in the database.

•Displays differences between the active TI zone and the defined TI zone in the zone database.

•Active TI zone members appear in the Active Zone Configuration tab.

•Added an Active Status display to the TI Zones Properties dialog.

•Policy to allow users to control the number of zone database modifications:

•Set limits on the number of editing operations (such as add, remove, or modify) that the user

can perform in zones, zone configurations, aliases, or on zone members before activation.

•Set policy by fabric because limits can vary (for example, disk limits can be different than tape

limits) .

•Warn users when a policy is exceeded, and prevent users from proceeding.

•Support for Quality of Service (QoS) Domain, Index Zones

Other enhancements

•Role-based access control (RBAC) enhancements:

•Added a Hosts tab to the Add/Edit Resource Group dialog to assign resources as a fabric or

host

•Added new default user roles: Network Administrator and Host Administrator

•Added new user privileges: Host Management, Active Session Management, FCoE Manage-

ment, CEE Management, and Zoning Set-Edit Limits

•Event Storage Enhancements in Options dialog enhancements:

•Increase the default event count from 5,000 to 20,000 in DCFM Enterprise and Professional

Plus

•The maximum configurable limit is 50,000 in DCFM Enterprise and Professional Plus

•DCFM Active Sessions enhancements:

•Now shows active client sessions logged in to the DCFM server

•Users with Active Session Management privilege set to Read Write can disconnect active clients

•Switch Configuration Management improvements:

•Added a Configuration Type column to identify the configuration file type as CEE or FC

•New HCM Upgrade tab

•Added a new HCM Upgrade tab to SMC to facilitate upgrading HCM in DCFM

•Backup dialog enhancements:

•Added the following check boxes:

•Include FTP Root Directory

•Include Technical Support Directory

•Include Upload Failure Data Capture Directory

•SNMPv3 enhancements:

•Option to choose either v3 traps or Informs

•Ability to configure at the fabric level from the Standalone dialog (instead of Discovery dialog)

•Supported with FOS 6.3 or later

•Support for 239 DID mode and offsets display (native connectivity with M-series switches)

•Port Auto Disable policy for any of the following conditions:

•Loss Of Sync

•Loss Of Signal

•Non Operational Primitive Sequence

•Loop Initialize Process

•Offline Primitive Sequence

B-series Data Center Fabric Manager Enterprise, Professional Plus, and Professional 7

Supported switches and firmware

Table 1 lists switches and firmware families supported with this release. This does not imply that all

firmware versions listed in the left column are still supported by HP, but rather that those are the

firmware streams on which the corresponding switches are, or were, supported. It also does not imply

that all the firmware listed streams are supported on each of the corresponding switches. HP

recommends using the latest software versions to get the greatest benefit from the SAN.

Table 1 Supported switches and firmware

Switch/DirectorSwitch firmware

HP StorageWorks SAN Switch 2/32 (Brocade 3900)

HP StorageWorks SAN Switch 2/8V (Brocade 3250)

HP StorageWorks SAN Switch 2/16V (Brocade 3850)

HP StorageWorks SAN Switch 4/32 (Brocade 4100)

HP StorageWorks 400 Multi-Protocol Router (Brocade 7500)1

HP StorageWorks 4/8, 4/16 SAN Switch (Brocade 200E)

HP StorageWorks SAN Switch 4/64 (Brocade 4900)2

HP StorageWorks SAN Switch 4/32B (Brocade 5000)3

HP StorageWorks 8/8, 8/24 SAN Switch (Brocade 300)4

HP StorageWorks 8/40 SAN Switch (Brocade 5100)4

HP StorageWorks 8/80 SAN Switch (Brocade 5300)4

HP StorageWorks Core Switch 2/64 (Brocade 12000)

HP StorageWorks SAN Director 2/128 (Brocade 24000)

HP StorageWorks 4/256 SAN Director (Brocade 48000)

•HP StorageWorks 4/256 SAN Director 16 Port 4Gb Blade (FC4-16)

•HP StorageWorks 4/256 SAN Director 32 Port 4Gb Blade (FC4-32)

•HP StorageWorks 4/256 SAN Director 48 Port 4Gb Blade (FC4-48)2

•HP StorageWorks iSCSI Director Blade (FC4-16IP)2

•HP StorageWorks Multi-Protocol Router Blade (FR4-18i)1

•HP StorageWorks SAN Director 6 Port 10Gb FC ISL Blade (FC10-6)5

HP StorageWorks DC SAN Backbone Director (Brocade DCX)6

•HP StorageWorks DC SAN Director 16 Port 8Gb FC Blade (FC8-16)

•HP StorageWorks DC SAN Director 32 Port 8Gb FC Blade (FC8-32)

•HP StorageWorks DC SAN Director 48 Port 8Gb FC Blade (FC8-48)

•HP StorageWorks Multi-Protocol Router Blade (FR4-18i)

•HP StorageWorks DC SAN Director 6 Port 10Gb FC ISL Blade (FC10-6)

•HP DC Switch Encryption FC Blade

•HP StorageWorks DC SAN Director Multiprotocol Extension Blade (Brocade FX8-

24)7

•HP StorageWorks DC SAN Director Switch 10/24 FCoE Blade (Brocade FCOE10-

24)7

FOS 5.0.x, 5.1.x,

5.2.x, 5.3.x, 6.0.x,

6.1.x, 6.2.x, and

6.3.x

Switch/DirectorSwitch firmware

HP StorageWorks Encryption SAN Switch

HP StorageWorks DC04 SAN Director (Brocade DCX-4S) 8

•HP StorageWorks DC SAN Director 16 Port 8Gb FC Blade (FC8-16)

•HP StorageWorks DC SAN Director 32 Port 8Gb FC Blade (FC8-32)

•HP StorageWorks DC SAN Director 48 Port 8Gb FC Blade (FC8-48)

•HP StorageWorks Multi-Protocol Router Blade (FR4-18i)

•HP StorageWorks DC SAN Director 6 Port 10Gb FC ISL Blade (FC10-6)

•HP DC Switch Encryption FC Blade

•HP StorageWorks DC SAN Director Multiprotocol Extension Blade (Brocade FX8-

24)7

•HP StorageWorks DC SAN Director Switch 10/24 FCoE Blade (Brocade FCOE10-

24)7

HP StorageWorks 2408 FCoE Converged Network Switch (Brocade 8000)9

HP StorageWorks 1606 Extension SAN Switch (Brocade 7800)7

FOS 5.0.x, 5.1.x,

5.2.x, 5.3.x, 6.0.x,

6.1.x, 6.2.x, and

6.3.x

Brocade 4Gb SAN Switch for HP c-Class BladeSystem (Brocade 4024)10

Brocade 4Gb SAN Switch for HP p-Class BladeSystem (Brocade 4012)

HP StorageWorks EVA4400 Embedded Switch Module (Brocade 5410)11

Brocade 8Gb SAN Switch for HP BladeSystem c-Class (Brocade 5480)12

FOS 5.2.x, 5.3.x,

6.0.x, 6.1.x, 6.2.x,

and 6.3.x

HP StorageWorks Director 2/64, 2/140 (Brocade M6064 and M6140)

HP StorageWorks Edge Switch 2/16 (Sphereon 3216)

HP StorageWorks Edge Switch 2/32 (Sphereon 3232)

HP StorageWorks Edge Switch 2/12 (Sphereon 4300)

Sphereon 4400 (Brocade 4400)

Sphereon 4700 (Brocade 4700)

M-EOSc 9.6.x,

9.7.x, 9.8.x, and

9.9.x

Intrepid 10000 Director (Brocade Mi10K)M-EOSn 9.6.x,

9.7.x, 9.8.x, and

9.9

1Requires FOS V5.1.0 or later

2Requires FOS V5.2.0 or later

3Requires FOS V5.2.1b or later

4Requires FOS V6.1.0a or later

5Requires FOS V5.3.0 or later

6Requires FOS V6.0.0b or later

7Requires FOS V6.3.0 or later

8Requires FOS V6.2.0a or later

9Requires FOS V6.1.2_cee1 or later. Support for this switch in DCFM V10.1.xis for discovery only.

10Requires FOS V5.3.1 or later

11Requires FOS V6.1.0_8e or later

12Requires FOS V6.1.0_8e1 or later

B-series Data Center Fabric Manager Enterprise, Professional Plus, and Professional 9

Supported operating systems

Table 2 lists the operating systems that support DCFM 10.3.0.

Table 2 Supported operating systems

VersionsOperating system

•XP Professional SP2, SP3 (x86 32-bit)

•2003 Server SP2 (x86 32-bit)

•Vista Business Edition (x86 32-bit)

•2008 Server (x86 32-bit)

Windows

10 (SPARC platform)Solaris

•Red Hat AS 4.0 (x86 32-bit)

•Red Hat Enterprise Linux 5 Advanced (x86 32-bit)

•SUSE Linux Enterprise Server 10 SP1 (x86 32-bit)

Linux

Supported feature summary for DCFM

Table 3 lists the DCFM supported features.

Table 3 Supported DCFM features

DCFM EnterpriseDCFM Professional PlusDCFM ProfessionalFeature

2441Number of fabrics

M-EOS, FOS, MixedM-EOS, FOS, MixedFOSType of fabric supported

9,000 (FOS); 5,000

(M-EOS/Mixed)

2,5601,000Number of ports

YesYesYes4-Gb and 8-Gb Switches

YesYesYesDC SAN Director 10/24

FCoE Blade/2408 FCoE

Converged Network

Switch

YesYesYes1606 Extension SAN

Switch

YesYesYes4/256 SAN Director

YesYesYesDC04 SAN Director

Switch

YesYesYesHBA Management (HCM)

YesYesYesVirtualization support

YesYesYesEncryption SAN

Switch/Encryption Blade

Andere Handbücher für Deskjet 812c

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HP Software Handbücher

HP BB118BV - StorageWorks Data Protector Express... Gebrauchs- und Pflegehandbuch

HP dc5750 - Microtower PC Bedienungsanleitung

HP HPE XP P9500 Bedienungsanleitung

HP 8/20q Bedienungsanleitung

HP B6960-96035 Bedienungsanleitung

HP Vectra VL800 Bedienungsanleitung

HP AK373A - StorageWorks All-in-One Storage System 1200r 5.4TB SAS Model NAS... Anleitung zur Verwendung

HP C8000 - Workstation - 0 MB RAM Bedienungsanleitung

HP Neoware e140 - Thin Client Bedienungsanleitung

HP Color LaserJet CP3505 Series Gebrauchs- und Pflegehandbuch

HP HP 2605dn Print Drivers Service-Handbuch

HP Compaq NC4000 Betriebsanleitung

HP PCL 5 Bedienungsanleitung

HP Integrity Superdome 2 16-socket Bedienungsanleitung

HP LASERJET ENTERPRISE 500 Service-Handbuch

HP StorageWorks 8B - FC Entry Switch Bedienungsanleitung

HP 8000 - Elite Convertible Minitower PC Bedienungsanleitung

HP ProLiant BL620c G7 Montage- und Bedienungsanleitung

HP 742n - Pavilion - 512 MB RAM Montage- und Bedienungsanleitung

HP StorageWorks MSA 2/8 - SAN Switch Bedienungsanleitung

HP SN3000B Bedienungsanleitung

HP BB118BV - StorageWorks Data Protector Express... Bedienungsanleitung

HP TACL Betriebsanleitung

HP 6200C Bedienungsanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Novell

Novell GROUPWISE 8 - INTERNET AGENT Bedienungsanleitung

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung

Novell

Novell SP2 - S Bedienungsanleitung