HP StorageWorks 2/16 - SAN Switch Bedienungsanleitung

HP StorageWorks

Fabric OS 3.2.1 release notes

Part number: AA-RUQYF-TE

Sixth edition: January, 2006

Legal and notice information

Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the implied

warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or

for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

This document contains proprietary information, which is protected by copyright. No part of this document may be photocopied,

reproduced, or translated into another language without the prior written consent of Hewlett-Packard. The information is provided

“as is” without warranty of any kind and is subject to change without notice. The only warranties for HP products and services are

set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as

constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

Microsoft, Windows, Windows NT, and Windows XP are U.S. registered trademarks of Microsoft Corporation.

UNIX® is a registered trademark of The Open Group.

Fabric OS 3.2.1 release notes

3Fabric OS 3.2.1 release notes

About this document

This section identifies the audience of these Release Notes and provides a high-level

description of the information it contains.

Release Notes overview

These Release Notes cover the following major topics:

•Fabric OS 3.2.1 enhancements, page 3

•HP StorageWorks Fabric OS 3.2.1 addendum, page 6

•Accessing documentation, page 6

•Important notes, page 8

•Documentation updates, page 10

Audience

These Release Notes are intended for systems administrators and technicians

who are responsible for installing, operating, and maintaining Fabric OS version 3.2.1.

Fabric OS 3.2.1 enhancements

Fabric OS v3.2.1 is a maintenance release containing fixes to a number of defects found since

the release of Fabric OS v3.2.0a. Aside from these changes, this maintenance release includes

the same feature set as the Fabric OS v3.2.0 release.

HP StorageWorks Fabric OS v3.2.1 contains significant enhancements in the areas of Fibre

Channel long-distance support, scalability, and manageability. Several improvements since the

release of HP StorageWorks Fabric OS v3.1.3 have been incorporated in this release. Major

new features include:

•Additional support for the HP StorageWorks Multi-protocol (MP) Router

•Updated security enhancements:

•RADIUS

• DH-CHAP authentication

•Improved manageability and ease-of-use for Fabric Watch and Advanced Web Tools

Supported switches4

NOTE: HP software release policy is to carry forward all fixes in patches to subsequent

maintenance and feature releases of Fabric OS.

Supported switches

Fabric OS v3.2.1 supports the following switches:

•HP StorageWorks SAN Switch 2/8

•HP StorageWorks MSA SAN switch 2/8

•HP StorageWorks SAN Switch 2/16

Fabric OS 3.2.1 updates

Table 1 lists Fabric OS 3.2.1 fixes.

Table 1 Issues resolved in this 3.2.1 release

Issue prior to Fabric OS 3.2.1 Fix

Third party tape drives did not respond to

configuration.

Third party tape drives working with SAN Switch 2/16.

After executing switchdisable or enable

in a large, secure fabric, some SAN Switch

2/16 models experienced queue overflow

and rebooted.

SAN Switch 2/16 in large, secure fabrics do not

experience queue overflow messages and switch reboot.

No monitoring of basic monitor service

without an Advanced Performance

Monitoring (APM) license.

Basic monitoring allowed without an Advanced

Performance Monitoring (APM) license.

config upload failed on switches

supporting a large Zone database.

API_MAX_CONFIG size is increased.

SAN Switch 2/16 models panicked when

connected to a third party switch during

Zoning updates in Interop mode.

SAN Switch 2/16 models operate normally during

Zoning updates in Interop mode.

SAN Switch 2/16 models used incorrect

buffer-tobuffer (BB) credits when switch BB

credit was set less than device BB credit.

Fabric OS 3.2.1 uses same BB credit limit as

defined in switch.

5Fabric OS 3.2.1 release notes

Technical support

Contact Hewlett-Packard support for hardware, firmware, and software support, including

product repairs and part ordering. To assist your support representative and to expedite your

call, have the following information available:

•Technical support contact number, if available

•Switch model

•Switch operating system version

•Error messages received

•Output from supportshow command

•Detailed problem description and specific questions

•Description of any troubleshooting steps already performed and results

Switch serial number

The switch serial number and corresponding bar code are provided on the serial number label,

as shown here.

World Wide Name (WWN)

At the CLI prompt, type the wwn command to display the switch WWN.

Short burst of bad primitives on the link

causes rx_under flow error.

Fabric OS 3.2.1 extends switch tolerance to the

number of bad primitives.

If two or more ports zoned together on a

SAN Switch 2/16, ZONEGROUPADDFAIL

message displayed.

Multiple ports in same Zone function normally.

Email configured via Fabric Watch was

not received on certain third party mail

servers.

Email header format adjusted.

Table 1 Issues resolved in this 3.2.1 release (continued)

Issue prior to Fabric OS 3.2.1 Fix

*FT00X0054E9

FT00X0054E9

HP StorageWorks Fabric OS 3.2.1 addendum6

HP StorageWorks Fabric OS 3.2.1 addendum

The most current 3.2.1 documentation updates are provided in the HP StorageWorks Fabric OS

3.2.1 Addendum. See Accessing documentation, page 6, for detailed instructions on

downloading this and other related documents.

Accessing documentation

Additional documentation, including white papers and best practices documents, is available

at the HP web site:

http://welcome.hp.com/country/us/eng/prodserv/storage.html

NOTE: HP makes every effort to provide you with the most up-to-date Web retrieval

procedures available at time of print. Note, however, that Web page links are subject to

change.

To access the technical documentation:

1. Locate the IT storage products section of the web page.

2. Under Networked storage, click SAN infrastructure.

3. From the SAN infrastructure web page, locate the SAN Infrastructure products section.

4. Click Fibre Channel Switches.

5. Locate the B-Series Fabric section.

6. Depending on your switch, locate the B-Series Fabric-Entry-level subsection. Click the

appropriate switch to access Fabric OS documents.

7. Go to the Support section, located on the right side of the web page, and click Technical

documents.

8. From the HP Business Support Center web page, locate the Resources for... section for your

particular switch. Click Manuals (guides, supplements, addendums, etc).

Follow the on-screen instructions to download the applicable documents.For information about

Fibre Channel standards, visit the following web site:

http://www.t11.org

7Fabric OS 3.2.1 release notes

Standards compliance

HP products conform to these standards in a manner consistent with accepted engineering

practices and procedures. In certain cases, HP may add proprietary supplemental functions to

those specified in the standards. We verify conformance with Fibre Channel Standards by

subjecting our switches to SANmark Conformance Tests developed by the Fibre Channel

Industry Association. Our switches have earned the SANmark logo indicating such

conformance. SANmark is a limited testing program and does not test all standards or all

aspects of standards.

HP StorageWorks Fabric OS 3.2.1 conforms to the following Fibre Channel Standards:

•FC-AL ANSI X3.272: 1996

•FC-AL-2 NCIT S 332: 1999

•FC-FLA NCIT S TR-20: 1998

•FC-GS-2 NCIT S 348-2000 Rev 7.01

•FC-FG ANSI X3.289: 1996

•FC-PH ANSI X3.230: 1994

•FC-PH-2 ANSI X3.297: 1997

•FC-PH-3 ANSI X3.303: 1998

•FC-PLDA NCIT S TR-19: 1998

•FC-SW-2 Rev 5.3

•FC-VI Rev 1.61

•FC-MI Rev 1.92

•FC-BB Rev 4.7

•FC-FS Rev 1.7

•FC-BB-2 Rev 5.3

•IPFC RFC 2625

•FCP ANSI X3.269: 1996

•FCP-2 Rev 7

Important notes8

Important notes

This section provides information you should be aware of when running Fabric OS 3.2.1.

OS requirements

HP recommends using the latest software release versions to get the greatest benefit from the

SAN. Refer to the following web site for information:

http://www.hp.com

Mixed fabric environment with different switch platforms

Fabric OS v2.6.2, v3.1.2, and v4.2.x introduced a new switch PID format: Extended Edge PID

(Format 2). Extended Edge PID is useful if you introduce a Fabric OS 3.2.1 switch into a fabric

consisting solely of Fabric OS v2.x/v3.x switches. Before adding a Fabric OS v3.2.1 switch to such

a fabric, refer to the

HP StorageWorks Fabric OS procedures 3.1.x/4.1.x user guide

for

information on the Extended Edge PID format.

NOTE: Switches must operate with Fabric OS v2.6.2, v3.1.2, v4.2.x or later to use the

Extended Edge PID format.

If Extended Edge PID is set (before a downgrade from the current Fabric OS release to an

earlier Fabric OS release that does not support the Extended PID format), PID needs to be set

back to a supported format, such as Core PID (format 1) or native PID (format 0).

Advanced Web Tool updates

When using a mixed fabric—that is, a fabric that contains v4.x, v3.x, and v2.x switches—HP

recommends that you use the most advanced switches to control the fabric. For example, use

the 4.x switches as the primary Fibre Channel Switch (FCS), as the location to perform zoning

tasks, and as the time server. HP also recommends that you use the most recently released

firmware to control the fabric.

If a dialog box is displayed from the Switch Admin window of Advanced Web Tools and the

user selects another dialog box from Advanced Web Tools, a window display error occurs.

This is a known issue in JavaTM 1.3. HP recommends using Java 1.4.1_03.

Two-domain and Four-domain fabric licensing

If your fabric includes a switch with a license for a limited number of switches in the fabric and

the fabric exceeds the limit, Advanced Web Tools allows a 45-day grace period during which

you can still monitor the switch. Advanced Web Tools periodically displays warning messages.

These messages warn you that your fabric size exceeds the supported switch configuration limit

and tells you how long you have before Advanced Web Tools will be disabled. After the

45-day grace period, you will no longer be able to launch Advanced Web Tools.

9Fabric OS 3.2.1 release notes

NOTE: Two-domain and four-domain fabric licensing is applicable only to 2 Gb/s switches.

Installing Mozilla 1.4 on Solaris 8 and Solaris 9

For instructions to install Mozilla 1.4 on Solaris 8 and Solaris 9, go to the web site:

http://ftp.mozilla.org/pub/mozilla.org/mozilla/releases/mozilla1.4/mozilla-sparc-sun-solaris2.8_1.4.read

Mozilla browser support for Switch Admin module

The Mozilla browser does not support the Switch Admin module properly in Fabric OS v2.6.x.

In Fabric OS v2.6.2, a warning message is displayed. No warning message is displayed in

other v2.6.x versions.

Workaround: Use Netscape 4.7.7 or later.

Browser, OS, and Java Plug-in support

Advanced Web Tools browser, operating system, and Java Plug-in support is updated for

Fabric OS v3.2.1. Table 2 identifies the supported browsers, operating systems, and Java

Plug-ins for this release. Go to the

http://www.hp.com

web site for the latest list of supported

operating systems.

Table 2 Browsers, operating systems, and Java plug-ins

Priority Operating system Browser Java plug-in

1 Windows 2000 IE 6.0 1.4.2_03

2 Windows XP IE 6.0 1.4.2_03

3 Windows 2003 IE 6.0 1.4.2_03

4 Solaris 2.8, 2.9 Mozilla 1.6 1.4.2_03

5 Red Hat Linux 9.0 Mozilla 1.6 1.4.2_03

6 Solaris 2.8 Mozilla 1.6 1.4.2_03

Documentation updates10

Documentation updates

Read this section for late-breaking additions and corrections to documentation.

HP StorageWorks SAN Switch 2/8 EL installation guide,

PN: AA–RSB6B–TE

•On page 87, Table 8:

•TheTemperature condition refers to the ambient air temperature at the air intake vents

on the nonport side of the switch. You should change the Temperature condition within

the Condition heading in the table to Ambient Temperature and also add the

following note:

NOTE: The temperature inside the switch can be up to 75 degrees Celsius (167 degrees F)

during switch operation.

HP StorageWorks SAN Switch 2/16 installation guide,

PN: AA–RR84B–TE

•On page 92, Table 8:

•TheTemperature condition refers to the ambient air temperature at the air intake vents

on the nonport side of the switch. You should change the Temperature condition within

the Condition heading in the table to Ambient Temperature and also add the

following note:

NOTE: The temperature inside the switch can be up to 75 degrees Celsius (167 degrees F)

during switch operation.

•On page 64, Table 4:

• The following statement should be added to the Port Status LED information for when the

port status is “offline”:

“When a Port Status LED indicator light is off, another possible hardware status is

offline.”

Andere Handbücher für StorageWorks 2/16 - SAN Switch

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HP Software Handbücher

HP StorageWorks MSA 2/8 - SAN Switch Bedienungsanleitung

HP StorageWorks 2/64 - Core Switch Bedienungsanleitung

HP Color LaserJet CP3505 Series Gebrauchs- und Pflegehandbuch

HP e-Diagtools 3.02 Handbuch

HP StorageWorks 1606 - Extension SAN Switch Bedienungsanleitung

HP Pro 3130 MT Bedienungsanleitung

HP D6030A - NetServer - E50 Bedienungsanleitung

HP StorageWorks 2/16 - SAN Switch Bedienungsanleitung

HP HPE XP P9500 Bedienungsanleitung

HP D7171A - NetServer - LPr Bedienungsanleitung

HP T5720 - Compaq Thin Client Bedienungsanleitung

HP Rx2620-2 - Integrity - 0 MB RAM Bedienungsanleitung

HP C8000 - Workstation - 0 MB RAM Bedienungsanleitung

HP TR3271 Betriebsanleitung

HP J4813A Bedienungsanleitung

HP 6200C Bedienungsanleitung

HP ProLiant DL320e Bedienungsanleitung

HP T5725 - Compaq Thin Client Bedienungsanleitung

HP Bc1500 - BladeSystem - Blade PC Bedienungsanleitung

HP Rx2620-2 - Integrity - 0 MB RAM Bedienungsanleitung

HP Guardian Bedienungsanleitung

HP T5145 - Thin Client - Tower Bedienungsanleitung

HP Neoview SQL Bedienungsanleitung

HP t5630 - Thin Client Bedienungsanleitung

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Novell

Novell GROUPWISE 8 - INTERNET AGENT Bedienungsanleitung

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung

Novell

Novell SP2 - S Bedienungsanleitung