HP Surestore Tape Library Model 10/180 Bedienungsanleitung

313670504 (Rev D) 1

Installing the Web-Based Library Administrator

Requirements Before installing the Web-Based Library Administrator,

verify that the following requirements are met:

• Library is powered on and initialized

• Minimum requirements: 200MHz processor; 64 MB

RAM (96 MB RAM is preferred)

• Microcode level 3.01 or later is loaded.

Microcode level 3.01 contains the Web-Based Library

Administrator software.

• Java™ Plug-in Software 1.4 or later

You can download the Java plug-in from:

http://java.sun.com/products/plugin

• Netscape Navigator 4.5 or later or Internet Explorer 4.0

or later with the latest Service Pack

Procedures The following steps must be performed in the order in

which they are presented to successfully install the

Web-Based Library Administrator.

Note: You must know the IP Address of your library before

you perform the following steps.

313670504 (Rev D) 2

Step 1 Ensure the library is powered on and initialized.

Step 2 Connect your Ethernet cable to the ENET connector on the

electronics module bulkhead.

This allows you to communicate with the Web-Based

Library Administrator.

See Figures 1 and 2 for the connection diagram.

Step 3 Set up yourInternet Protocol (IP) Address from the Operator

Panel.

After you have powered on or reset the library, the library

performs a reset. When the reset is complete, the Operator

Panel displays a status screen.

a. Press MENU.

The MAIN MENU is displayed.

b. Arrow to CONFIGURATION and press SELECT.

The CONFIGURATION MENU is displayed.

c. Arrow to NETWORK CONFIG and press SELECT.

The NETWORK CONFIG MENU is displayed.

d. Arrow to IP ADDRESS and press SELECT.

An edit window is displayed.

Follow the directions on the Operator Panel for

entering and saving data.

e. Press MENU.

f. Perform a reset to save the changes.

Step 4 Set up your Subnet Mask from the Operator Panel.

313670504 (Rev D) 3

You need to ask your System Administrator for this number.

a. Press MENU.

The NETWORK CONFIG MENU is displayed.

b. Arrow to SUBNET MASK and press SELECT.

An edit window is displayed.

Follow the directions on the Operator Panel for

entering and saving data.

c. Press MENU.

The NETWORK CONFIG MENU is displayed with

the information you entered.

d. Perform a reset to save the changes.

Step 5 Set up your Library Name from the Operator Panel.

The library name is aliased to the IP Address by your

Network Administrator.

An alias is the logical mapping created between the library

and its IP Address.

a. Press MENU.

The NETWORK CONFIG MENU is displayed.

b. Arrow to LIBRARY NAME and press SELECT.

An edit window is displayed.

Follow the directions on the Operator Panel for

entering and saving data.

c. Press MENU.

The NETWORK CONFIG MENU is displayed with

the information you entered.

313670504 (Rev D) 4

d. Perform a reset to save the changes.

Step 6 Set up your Network Gateway from the Operator Panel.

This allows you to link to different networks.

You need to ask your System Administrator for this number.

a. Press MENU.

The NETWORK CONFIG MENU is displayed.

b. Arrow to NETWORK GATEWAY and press SELECT.

An edit window is displayed.

Follow the directions on the Operator Panel for

entering and saving data.

c. Press MENU.

The NETWORK CONFIG MENU is displayed with

the information you entered.

d. Perform a reset to save the changes.

Step 7 - optional Configure the Java Plug-in for code download to the library

Note: This step is required only if you wish to enable code

downloads from the web interface. You must have loaded

the Java Plug-in 1.4 or later.

a. Launch the Java Policytool.

The Java policytool should be located in the Java

installation directory. The file is called:

policytool in UNIX

policytool.exe in Microsoft®Windows®

313670504 (Rev D) 5

b. Write down the policy name and click OK if an error

dialog box is displayed stating it “Could not find the

Policy File”.

This policy name is used later in this procedure.

Add the Policy:

a. Click Add Policy Entry button.

The Policy Entry window is displayed.

b. Type:

http://<library IP>/libconnect.jar in the CodeBase

field, where library IP is the 12-digit library IP address

(Example: 123.456.789.012) or domain name.

Note: You must enter one policy entry for each library

you wish to access.

c. Click Add Permission button.

The Permissions window is displayed.

d. Pull down the Permission combo box and select

FilePermission.

e. Type the path/name of the file to be downloaded in the

TargetName field.

Example: c:\temp\release.prm

Note: Ensure you use path separators that are

appropriate for your operating system. They are:

/ for Unix

\ for Microsoft Windows

f. Pull down the Actions combo box and select read.

g. Click OK.

313670504 (Rev D) 6

The Policy Entry window is displayed with the

information you entered.

h. Click Done.

The Policy Tool window is displayed with the

CodeBase you entered.

i. Save the new policy name to disk by selecting one of

the following:

- If an error dialog box was displayed when you

launched the Policy Tool:

1. Pull down the File menu and click Save As.

2. Type the name of the policy name you wrote down

when you launched the Policy Tool.

Note: Ensure you use path separators that are

appropriate for your operating system. They are:

/ for Unix

\ for Microsoft Windows

- If an error box was not displayed:

1. Pull down the File menu.

2. Click Save.

j. Pull down the File menu and click Exit.

313670504 (Rev D) 7

Step 8 Perform a ping to ensure the IP Address is correct.

To do this in Windows:

a. Go to the Windows Start Menu.

b. Select Start -> Run.

c. Enter ping <library name or IP Address> in the

Start->Run text field.

To do this in UNIX:

–Enter ping <library name or IP Address> from the

command line.

Step 9 Start the Web-Based Library Administrator by accessing

NetscapeorInternet Explorer andenteringyourlibraryname

or IP address at the address bar.

313670504 (Rev D) 8

Figure 1

10/180 Tape Library

1. Enet (Ethernet connection)

C24421

313670504 (Rev D) 9

Figure 2

20/700 Tape Library

1. Enet (Ethernet connection)

C24422

313670504 (Rev D) 10

Andere Handbücher für Surestore Tape Library Model 10/180

Dieses Handbuch passt für folgende Modelle

Andere HP Software Handbücher

HP StorageWorks 2/64 - Core Switch Bedienungsanleitung

HP AB500A - Integrated Lights-Out Advanced Bedienungsanleitung

HP StorageWorks 2/64 - Core Switch Service-Handbuch

HP HPE XP P9500 Bedienungsanleitung

HP AJ765A - StorageWorks RDX Removable Disk Backup... Bedienungsanleitung

HP HPE XP P9500 Bedienungsanleitung

HP BL680c - ProLiant - G5 Bedienungsanleitung

HP SN6000B Bedienungsanleitung

HP Tc4100 - Server - 256 MB RAM Kurzanleitung

HP BladeSystem Dual NC370i - Multifunction Network... Bedienungsanleitung

HP AJ765A - StorageWorks RDX Removable Disk Backup... Bedienungsanleitung

HP T1936AA - Digital Sending Software Montageanleitung

HP cc2300 Bedienungsanleitung

HP StorageWorks 8B - FC Entry Switch Bedienungsanleitung

HP HP Integrated Lights-Out Bedienungsanleitung

HP StorageWorks SSL1016 Gebrauchsanweisung

HP SysMan Bedienungsanleitung

HP T5145 - Thin Client - Tower Bedienungsanleitung

HP HP Integrated Lights-Out Bedienungsanleitung

HP StorageWorks 2/140 - Director Switch Bedienungsanleitung

HP J4813A Bedienungsanleitung

HP Integrity rx5670 Bedienungsanleitung

HP ProCurve 1600M Bedienungsanleitung

HP NetServer AA 6200 Service-Handbuch

Beliebte Software Handbücher anderer Marken

COMPRO

COMPRO COMPROFM Bedienungsanleitung

Muratec

Muratec OFFICEBRIDGE ONLINE Bedienungsanleitung

Oracle

Oracle Contact Center Anywhere 8.1 Bedienungsanleitung

Adobe

Adobe 65007312 - Photoshop Lightroom Handbuch

Avaya

Avaya NULL One-X for RIM Blackberry Bedienungsanleitung

PS Audio

PS Audio PowerPlay Betriebsanleitung

Brady

Brady LOCKOUT PRO 3.0 Service-Handbuch

Avaya

Avaya Interaction Center Bedienungsanleitung

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Handbuch

Novell

Novell GROUPWISE 8 - INTERNET AGENT Bedienungsanleitung

Oracle

Oracle Application 9i Bedienungsanleitung

Acer

Acer RDM Bedienungsanleitung

Canon

Canon Vixia HF21 Bedienungsanleitung

Canon

Canon ZR950 Bedienungsanleitung

Samsung

Samsung Auto Backup Bedienungsanleitung

Polycom

Polycom Vortex EF2201 Montage- und Bedienungsanleitung

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Bedienungsanleitung

Novell

Novell SP2 - S Bedienungsanleitung