HP MSL4048 - StorageWorks Ultrium 920 Tape... Bedienungsanleitung

Dieses Handbuch passt für folgende Modelle

1

Inhaltsverzeichnis

Andere HP Lagerung Handbücher

HP

HP LTO Ultrium Produkthandbuch

HP

HP StorageWorks 9100 - Extreme Data Storage... Bedienungsanleitung

HP

HP StorageWorks 1510i - Modular Smart Array Bedienungsanleitung

HP

HP StorageWorks 2000fc Leitfaden

HP

HP Converged Architecture 700 Kurzanleitung

HP

HP Surestore Disk Array 12h - And FC60 Bedienungsanleitung

HP

HP StorageWorks SDLT 600 Installationsanleitung

HP

HP 705 Kurzanleitung

HP

HP XP20000/XP24000 Bedienungsanleitung

HP

HP Storevirtual 4000 Bedienungsanleitung

HP

HP EVA P6000 Bedienungsanleitung

HP

HP Cisco MDS 9020 - Fabric Switch Bedienungsanleitung

HP

HP 6100 Leitfaden

HP

HP HPE 3PAR StoreServ 8000 Bedienungsanleitung

HP

HP P10000 Bedienungsanleitung

HP

HP StorageWorks 7110 - Virtual Array Bedienungsanleitung

HP

HP StorageWorks 2000i Bedienungsanleitung

HP

HP StorageWorks 4000/6000/8000 - Enterprise Virtual... Bedienungsanleitung

HP

HP StoreAll 9730 Service-Handbuch

HP

HP P9000 Bedienungsanleitung

HP

HP StorageWorks P4000 Series Bedienungsanleitung

HP

HP P2000 G3 Bedienungsanleitung

HP

HP 705 Kurzanleitung

HP

HP A5272A - SureStore E Disk System SC10 Storage... Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung

Dell

Dell PowerVault MD3600f Series Bedienungsanleitung

CFI

CFI TERA STOR SATA RAID IV Bedienungsanleitung

HP StorageWorks MSL2024 Tape

Library ﬁrmware release notes

Version 4.00

Part number: AK378-96006

First edition: July 7, 2008

Description

This release includes updated ﬁrmware for the HP StorageWorks MSL2024 Tape Library.

The Library ﬁrmware can be updated through any of the following methods:

•Remote management interface (RMI).

•Operator control panel (OCP).

•HP Library and Tape Tools (L&TT).

Library ﬁrmware version

•4.00

Update recommendation Recommended

Supersedes All earlier versions of Library ﬁrmware.

Product models

All HP StorageWorks MSL2024 Tape Libraries.

Languages

•English (American)

•English (International)

Enhancements

•Support added for Internet Protocol version 6 (IPv6).

•Support added for partitioning the Library into logical libraries. The Tape Library can have up to

as many logical libraries as there are tape drives.

•Support added for the 1/8 G2 and MSL Encryption Kit, which is a solution for generating and

storing encryption keys to write and restore encrypted data on LTO-4 media with LTO-4 tape drives.

•Support added for the Ultrium 1760 parallel SCSI half-height tape drive.

•Support added for SNMP version 2.

•Ability to save and restore the Library conﬁguration settings to a USB ﬂash drive (from the OCP)

or a ﬁle (from the RMI).

•The number of allowed reserved slots is increased from 9 to 22.

Fixes

•Fixed a case where the Library could appear unresponsive when used with network security

programs that constantly check the security status of all network ports. Usually Drive

Communication (code: F1 xx) errors were the last entries in the library logs.

•Fixed a case where the Library could appear unresponsive after the operator issued a command

from the OCP to remove a magazine but the magazine was not removed.

•Fixedacasewherethetimestampinthelibrarylogswouldberecordedasonedayearlier

than the library time.

•Fixed a case where error retry Code 88 00 (setting of sled motor parameters failed) was

incorrectly logged during the power up sequence.

•Fixed a case where error code 9B (sled position sensor not found) was reported at ambient

temperatures below 10 C when the mailslot did not pop out more than 15 mm.

•Fixed a case where the Library would report Not Ready after running the Demo Test.

•Improved an error message in the Wellness test when an upper corner slot is empty.

HP StorageWorks MSL2024 Tape Library ﬁrmware release notes 3

•The Library temperature is now reported on LOG SENSE page 0x0D.

•Fixed a case where the Library could not detect when the mailslot was closed very quickly.

Installation instructions

To upgrade ﬁrmware from the RMI:

1. Download current ﬁrmware using HP Library & Tape Tools or from the HP support website:

http://www.hp.com/support/storage.

2. Log into the RMI as the administrator user.

3. In the Support: Firmware page, browse to the location of the Library ﬁrmware ﬁle.

4. Click Update.

To upgrade ﬁrmware from the OCP using a USB ﬂash drive:

1. Download current ﬁrmware using HP Library & Tape Tools or from the HP support website:

http://www.hp.com/support/storage.Copytheﬁrmware onto the USB ﬂash drive.

2. Insert the USB ﬂash drive into the USB port on the back of the Library.

3. From the Home screen, press Next until the screen displays Support.PressEnter to select.

4. Press Next until the screen displays Library FW upgrade.PressEnter to select.

5. Enter the administrator password if prompted.

6. Press Next until the screen displays the ﬁlename of the Library ﬁrmware ﬁle on the USB drive. Press

Enter to select the ﬁrmware ﬁle.

7. If the upgrade failed, press Enter to display the error code and message describing the cause of

the failure.

8. When the upgrade is complete, remove the USB ﬂash drive from the USB port.

Determining current version

To ﬁnd the version of ﬁrmware installed on the Library from the RMI, see the Support: Firmware screen.

To ﬁnd the version of ﬁrmware installed on the Library from the OCP:

1. From the Home screen, press Next until the screen displays Status/Information.PressEnter to select.

2. Press Next until the screen displays Library information.PressEnter to select.

3. Press Next until the screen displays Firmware rev..PressEnter to select.

Firmware Version Released Status

1. 91 5/31/2006 Active

3.70 2/20/2008 Active

3.80 6/9/2008 Active

4.00 7/7/2008 Active

Effective date

July 7, 2008

4