HP StorageWorks P4000 Series Bedienungsanleitung

HP P4800 G2 SAN Solution for BladeSystem

Quick Start Guide

*BV931-96001* Printed in Puerto Rico

Step 1 Setting up the storage system

Step 2

Documentation Available

For links to the latest manuals for HP BladeSystem and other P4800 G2 components, see the HP P4800 G2 SAN Solution for BladeSystem Documentation CD.

For detailed instructions about using and maintaining the HP P4800 G2 SAN Solution for BladeSystem, see the following resources:

•Online Help

Click Help > Help Topics from the menu bar to open the Online Help. Context-sensitive help is available by clicking the question mark on any window.

•HP P4000 SAN Solution User Guide

Find complete instructions for configuring and managing storage systems and clustered storage volumes in the User Guide. The User Guide is available in PDF format, installed in the

same directory as the Centralized Management Console program files.

•HP P4800 G2 SAN Solution for BladeSystem Maintenance Guide

Find detailed instructions for managing and maintaining the HP P4800 G2 SAN Solution for BladeSystem.

•HP P4000 VSA Installation and Configuration Guide

Find detailed instructions for planning and installing the VSA and getting started with the Centralized Management Console.

• HP P4000 Remote Copy User Guide

Find information about configuring and using asynchronous replication of storage volumes and snapshots across geographic distances.

• HP P4000 Multi-Site HA/DR Solution Pack User Guide

Find detailed instructions for designing and implementing the Multi-Site SAN features to synchronously and automatically mirror data between geographic sites.

• Release Notes

Review the Release Notes for the latest information about the product.

The latest versions of these documents, including localized versions can be found by browsing to http://www.hp.com/support/manuals. Click Disk Storage Systems

in the storage section and then select the product HP P4000 G2 SAN Solution.

For detailed conﬁguration information related to P4800 G2 use in VDI configurations, see the HP Converged Infrastructure Reference Architecture for VMware View at

http://www.hp.com/go/vdi.

Support Contacts

For worldwide technical support information, see the HP support website: http://www.hp.com/support.

Note

The HP P4800 G2 solution is available as a fully factory-integrated system or as a field installation. For the factory-integrated system, begin with step 1.

For the field installation, an HP Service Engineer will integrate the solution onsite and you can disregard the rest of this guide.

Example of a two node configuration. Connect a network cable from the OA on the blade enclosure to your manage-

ment network.

Connect the system power cord to the site power source. The blade enclosure

powers on automatically.

Connect at least one cable from each Flex-10 module to the management

network.

From the Insight Display assign a network address or allow DHCP address

assignment to the enclosure.

password located on the asset tag of the OA.

Using the OA virtual power buttons, power down the SAS switches and Flex-10

modules. Then reapply power in the following sequence:

1. Disk enclosure

Press the power button on the back of each disk enclosure. Wait three

minutes.

2. SAS Switches

Use the OA to power on the SAS switches. Wait one minute.

3. Flex-10 Modules

From the OA, power on the Flex-10 modules.

4. Server blades

One minute after powering on the SAS switches, power on the P4460sb

G2 server blades.

The remaining steps can be completed remotely.

Use the OA to conﬁgure the local enclosure.

Open the Virtual Connect Manager from the OA and log in using the

administrator username and password located on the asset tag of the active

Flex-10 module.

Conﬁgure the Virtual Connect domain and deﬁne a network for the iSCSI

trafﬁc. For user information, see the HP Virtual Connect for c-Class

BladeSystem User Guide on the HP P4800 G2 BladeSystem SAN Solution

Documentation CD

For an example of how to isolate iSCSI trafﬁc within the enclosure, skip the rest of

this guide and continue with the HP Converged Infrastructure Reference Architecture

for VMware View (http://www.hp.com/go/vdi).

1. Blade enclosure

2. P4460sb G2 Server blades

3. Insight Display

4. Disk enclosure

5. Flex-10 modules

6. SAS switches

7. Onboard Administrator (OA)

8. Disk enclosure power button

Front Back

SAS switch - Disk enclosure connections

Step 2 Configuring the network interface

Step 3 Setting up the SAN

Using the Onboard Administrator:

For each P4460sb G2 node, connect to the iLO Integrated Management Console

and complete the following instructions.

Prerequisites

Before conﬁguring the network settings on individual storage systems, have the

following information ready:

• Host names

• IP addresses, subnet mask and gateway.

Logging into the conﬁguration interface

Press enter to log in. Use the tab key to move through the ﬁelds and menu

options in the conﬁguration interface.

Conﬁguration interface main menu

Tab to network TCP/IP settings and press enter.

Selecting an interface to conﬁgure

Tab to select the network interface that you want to conﬁgure (eth0 or port1)

and press enter.

Change the host name and set IP address

Set the IP address, subnet mask and gateway.

Best practice

Manually assign IP addresses to the storage systems. Using DHCP to obtain an

IP address is not recommended unless using reserved addresses.

Verify IP address

Ping the IP address of the storage system from another host on the network to

verify that it is operating correctly.

Repeat for each storage system.

Using the HP P4000 Management Software for Microsoft Windows DVD:

Insert the DVD in the DVD drive. The installer should launch automatically.

Installing the centralized management console (CMC)

Install the CMC on the computer that you will use to administer the SAN. You

need administrative privileges while installing the CMC.

Using the installation wizard:

1. Click Centralized Management Console.

2. Click Install CMC.

3. Continue through the installation wizard, following the instructions on

each window.

Install the Failover Manager

Install the Failover Manager onto a separate server on the network.

Caution: Do not install the Failover Manager on the P4800 G2

BladeSystem SAN, since this would defeat the purpose of the Failover

Manager.

Using the installation wizard:

1. Click Failover Manager.

2. Click Install FOM.

3. Continue through the installation wizard, following the instructions on

each window.

4. Click Finish to exit the wizard and start the Failover Manager.

Discover storage systems on the network

Use Find Systems to discover the storage systems on the network, using either

IP addresses or Auto discover by broadcast checkbox.

The found storage systems appear in the Available Systems category in the

CMC.

Verify or configure RAID and configure network settings

Verify the RAID configuration on your storage systems before creating a

management group. You can only reconfigure RAID on storage systems that

are in the Available Systems pool. Change network settings, including

bonding NICs, before creating a management group.

Verify software version is up to date

Use the “Check for Updates” to update your software to the latest version.

Setting up SAN storage

Use the management groups, clusters and volumes wizard to set up the

storage conﬁguration and create a storage volume.

Download and install iSCSI initiator(s)

Install the appropriate iSCSI initiator on your application servers.

Enable access to volumes

Use the Assign Volume and Snapshot wizard to prepare the volume for

server access. You set up application servers in the management group, and

then assign volumes to the servers.

Configure the initiator(s) to ...

• Connect to the cluster VIP.

• Discover the targets.

• Log on.

• Format the disks with a file system.

Next Steps:

• Check the Alarms panel and resolve any alarms.

• Check the Best Practices Analyzer under the Configuration Summary.

Andere Handbücher für StorageWorks P4000 Series

Dieses Handbuch passt für folgende Modelle

Andere HP Lagerung Handbücher

HP DW017B - StorageWorks Ultrium 448 Tape Drive Bedienungsanleitung

HP P5389A - Intel Pentium III-S 1.4 GHz Processor... Bedienungsanleitung

HP StorageWorks 4000/6000/8000 - Enterprise Virtual... Bedienungsanleitung

HP P9000 Bedienungsanleitung

HP BAAD0010HBK-NHSN Bedienungsanleitung

HP StoreOnce 4900 Backup Bedienerhandbuch

HP StorageWorks Modular Smart Array 500 System Bedienungsanleitung

HP Surestore Disk Array 12h - And FC60 Bedienungsanleitung

HP EVA P6000 Bedienungsanleitung

HP StorageWorks 4000/6000/8000 - Enterprise Virtual... Bedienungsanleitung

HP Surestore Disk Array 12h - And FC60 Montageanleitung

HP VS80 - StorageWorks DLT VS 80 Tape Drive Bedienungsanleitung

HP StorageWorks 4000/6000/8000 - Enterprise Virtual... Bedienungsanleitung

HP StoreEver MSL3040 Handbuch

HP StoreEver MSL4048 Bedienungsanleitung

HP StorageWorks D2700 Bedienungsanleitung

HP 8505 8mm Cartridge Tape Drive EK-STWCT-UG.... Bedienungsanleitung

HP Pocket Playlist Bedienungsanleitung

HP Surestore 6164 - Switch Bedienungsanleitung

HP DW017B - StorageWorks Ultrium 448 Tape Drive Bedienungsanleitung

HP Surestore 1200ex - Optical Jukebox Bedienungsanleitung

HP Surestore FC10 - Disk Array Bedienungsanleitung

HP 3PAR StoreServ 7200 2-node Gebrauchs- und Pflegehandbuch

HP Surestore 6164 - Switch Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung

Dell

Dell PowerVault MD3600f Series Bedienungsanleitung

CFI

CFI TERA STOR SATA RAID IV Bedienungsanleitung