HP Storevirtual 4000 Bedienungsanleitung

HP P4000 SAN Solution Software Release

Notes

HP Part Number: AX696-96235

Published: September 2012

Edition: 7

Version:

•SAN/iQ software Version 9.5.00.1215

•Failover Manager ESX and Failover Manager Hyper-V software Version 9.5.00.1215

•HP P4000 Centralized Management Console Version 9.5.00.1215

•HP P4000 Command Line Interface (Cliq) Version 9.5.0.1050

•HP P4000 Application Integration Solution Pack Version 9.5.00.968 (was HP P4000 Windows

Solution Pack)

•HP P4000 Application Aware Snapshot Manager Version 9.5.0.996 (was VSS Provider)

•HP P4000 DSM for MPIO Version 9.5.0.981

•SRA for VMware SRM 5 Version 9.5.0.615

•SRA for VMware SRM 1x/4x Version 9.5.00.1215

Updated software components in this release

NOTE: New names for Version 9.5 software

•The HP P4000 Windows Solution Pack is now the HP P4000 Application Integration Solution

Pack.

•The VSS Provider is now delivered as part of the Application Aware Snapshot Manager component

of the Application Integration Solution Pack.

•SAN/iQ software

•HP P4000 Centralized Management Console

•HP P4000 Command Line Interface

•HP P4000 Application Integration Solution Pack

HP P4000 Application Aware Snapshot Manager◦

◦HP P4000 DSM for MPIO

◦HP P4000 Storage Replication Adapter for VMware SRM

Supported upgrade paths

Direct upgrades to Version 9.5 can be performed from the following released versions:

•Version 9.0

•Version 8.5

•Version 8.1

•Version 8.0

If you are upgrading from Version 7.0.01 SP1, the online upgrade automatically upgrades to Version

8.0 before upgrading to Version 9.5.

Description

These release notes provide information about upgrading to this release, and about enhancements

and fixes in this release. These release notes are current as of the published date.

Update recommendation

HP recommends that all customers running 9.0 and earlier versions upgrade to Version 9.5.

Updated software components in this release 3

Supersedes

Version 9.5 supersedes Versions 9.0, 8.5, and 8.1.

Platforms supported for this release

Upgrades to Version 9.5 software are available for the following platforms:

•HP P4300 G2

•HP P4500 G2

•HP P4800 G2

•HP LeftHand P4300

•HP LeftHand P4500

•VSA for ESX and for Hyper-V

•Failover Manager for ESX and for Hyper-V

•NSM 2120 G2

•NSM 2060 G2

•NSM 2120

•DL 320s

•DL 185

Languages

Version 9.5 supports the following languages:

•English

•Simplified Chinese

•Japanese

•Korean

•Spanish

NOTE: The Configuration Interface and the on-system CLI are not localized.

Announcing Microsoft Windows Server 2012 support with HP LeftHand

SAN/iQ software version 10.0 (releasing in late Fall 2012)

To use your HP P4000/StoreVirtual SAN Solutions on Windows Server 2012, you must upgrade your

storage system to 10.0 first and then upgrade to Windows Server 2012. SAN/iQ software version

10.0 is the first version that will support Windows Server 2012 and will include the latest set of

SAN/iQ features and performance enhancements. SAN/iQ 9.5 support for Windows Server 2012

will be delivered shortly after the SAN/iQ 10.0 release.

Stay tuned for the general availability date for SAN/iQ software version 10.0. For more information,

go to:

http://www.hp.com/go/LeftHandDownloads

Enhancements

The 9.5 release is a comprehensive release that includes enhancements in the following areas:

•Application managed snapshots for VMware ESX Server and Microsoft Hyper-V Server

•SAN Status Home Page — the SAN Status home page is the new home page for the CMC and

presents key information for all management groups in the storage environment in a single view.

4 Platforms supported for this release

•Zero to VSA automated installation and deployment — Single installer can install VSA, FOM and

CMC. Go from “zero” to a fully functional virtual SAN in just a few easy steps. Scriptable install

tool allows ROBO customers to script install once and deploy VSA quickly at multiple remote

locations.

•Peer Motion data mobility with cluster swap — Cluster swap allows users to replace or upgrade

P4000 clusters. Edit cluster menu guides decisions about adding, removing, or exchanging storage

systems. Easily migrate data online between tiers.

•Remote Copy performance improvements — Improvements to remote copy times, the time required

to scan volumes, ability to support more frequent snapshots, reduction of RPOs for DR solutions.

•Storage Replication Adapter for Vsphere Site Recovery Manager 5.x — Supports automated

failback and is included on the HP P4000 Application Integration Solution Pack

•Best Practice configuration wizards — Configuration wizards guide towards highest availability

configurations: add Failover Manager for 2–node configuration, configure disk RAID 6 for

single-node configurations, recommends volume replication when expanding clusters to more than

one storage system

Fixes

Released patch sets and patches that are included in Version 9.5 software.

Patch set 01

Includes the following fixes:

•Online upgrade issues when attempting to install a patch as part of the 9.0 upgrades

•Update to resolve specific language translations for specific languages

Patch set 02

Upgrade to the Centralized Management Console (CMC) to version 9.0.01.0125 includes the following

fixes:

•Resolves an issue where the CMC is unable to discover a storage system due to a MAC address

change

•Added Cancel button in the upgrade dialogue box which gives an option to cancel the upgrade

in progress

•Improved recovery from failed or cancelled upgrades with better error messages.

•The Performance Monitor in the CMC now displays correct values for network utilization statistics

on 10 Gigabit Ethernet networks

•Version 9.0 and greater VSA upgrades are no longer permitted for unsupported 32-bit ESX systems

•Online upgrades pause all schedules for a management group while the CMC upgrades that

management group. Schedules are restarted upon upgrade completion.

Patch 10054-03: Upgrade improvements to support the CMC changes for online upgrades.

Patch 20020 which includes the following fixes:

•Resolves a condition affecting memory use by a SAN/iQ manager under heavy network traffic

•Corrects the presentation of the queue depth statistics in the Performance Dashboard for storage

systems connecting to VMware ESX initiators running 4.1 or later

Fixes 5

•Corrects a condition where a network interface configuration could fail to complete with a

non-English CMC when configuring the interface through the TCP/IP tab with DHCP or a static

IP address

•Resolves a situation where, under certain conditions, on reboots after an upgrade to 9.0, SAN/iQ

9.0 appears to detect and report an erroneous controller cache discard event long after the

original condition has been addressed, corrected and no longer exists

Patch set 03

Included in Patch Set 03 are the following fixes:

•Address potential security issues in SAN/iQ 9.0

•Prevent SAN/iQ process restart due to invalid SCSI command from any iSCSI initiator

•Increase the efficiency of volume/snapshot re-synchronization calculations when a storage system

is restarted, or added to a cluster, or is replaced in a cluster

•Update the location of a support log file so it gets rotated correctly and Log Utilization remains

in normal range

•Added a critical alarm, "The ’Log Partition’ status is ’Read Only’" that is displayed when the

SAN/iQ log partition becomes read-only due to a previous hardware problem

•The CMC, along with supporting patch 10054-04, now prevents an upgrade if the SAN/iQ log

partition is in an unexpected state

•Added a Warning alarm “The SAN/iQ memory requirements check status is ’Insufficient’ Required

x GB” that is displayed when the storage server is offline because of insufficient memory

•Allow upper case letters for IQN names

•Suppress benign boot messages being displayed on the VGA console

•CMC now correctly reports cluster usage when managing an 8.5 management group with a 9.0

CMC

•CMC now connects to the management gateway/CIM server when accessing storage systems

via a separate management network

•Edit Management Group now shows out-of-date Remote Copy relationships, so you can disassociate

them to clear an alarm about an old remote management group being down

•Added new translated strings from the last patch set

Patch 10059: Enables cross-version Remote Copy where storage systems running SAN/iQ 8.0, 8.1,

and 8.5, that are not supported with SAN/iQ 9.0, get a SAN/iQ 9.0 manager, which allows them

to be configured as remote management groups and to receive remote snapshots from a primary

management group with storage systems running SAN/iQ 9.0.

Patch set 04

Included in Patch Set 04 are the following fixes:

•Large multi-terabyte volumes with small or sparsely filled snapshots now no longer experience

degraded performance with Remote Copy

•Large multi-site SAN clusters where Ethernet flow control is not configured now no longer experience

degraded performance with SAN/iQ 9.0

•The Adaptive Load Balancing (ALB) bond configuration updelay parameter for both 1GbE and

10GbE has been changed to 30 seconds for more efficiency in failover situations

•9.0 SNMP now reports accurate storage system performance statistics for storageRaidStats OIDs

in the Storage MIB

•Allow special characters in SNMP community string, such as ~`!@$%^&*():;=+[]{}|,.<>?

6 Fixes

•CMC now detects a disabled Failover Manager in the management group and displays a better

status message along with resolution steps to recover from this situation

•Corrects the 9.0 CMC Performance Dashboard so that if the monitoring interval is set to minutes

or hours using the Edit Monitoring Interval from the Tasks menu, it can subsequently be changed

using the Edit Monitoring Interval

•Corrects the 9.0 CMC Performance Dashboard error that displayed read throughput values as

zero for volume sizes of 2TB or later

•Corrects the error message displayed by the 9.0 CMC when connecting to storage systems running

a higher version of SAN/iQ

•Added a check to 9.0 CMC online upgrades for any existing hardware problems in a pre-9.0

storage system during the upgrade pre-qualification tests, and ensures that the hardware passes

the required tests before proceeding with the upgrade. If a hardware problem is detected, the

upgrade fails with an appropriate error message and can be retried after resolving the problem.

•9.0 CMC online upgrades now provide the ability to apply prerequisite patches to storage systems

before upgrading to the appropriate SAN/iQ version

•Corrected the 9.0 CLI makePrimary command to retain the thin provisioning attribute of the

volume/snapshot being converted to primary

•Corrected the 9.0 CLI commands getsnapshotinfo and getremotesnapshotinfo to

execute correctly when used with the deletesnapshot command

•Corrected the 9.0 CLI command getperformancestats to work correctly when there is a

Failover Manager in the management group

•The CLI recoverQuorum command now works successfully in the rare cases that it previously

failed to restore quorum to the management group

•Fixes a security vulnerability in the SAN/iQ management service logging

•Fixes excessive benign messages in some log files to improve supportability

•Improves supportability by archiving specific P4800 RAID controller log files as is done in other

P4000 SAN platforms

Prerequisites

HP P4000 Centralized Management Console

•For the CMC complete installation, 35 MB disk space and 50 MB RAM during runtime

•Minimum monitor resolution for the CMC is 1024 x 600

HP P4000 Application Integration Solution Pack

•Microsoft iSCSI Software Initiator - Recommended: Version 2.08 (or later)

•Application Aware Snapshot Manager (was VSS Provider)

Windows

◦Windows Server 2003 R2 SP2

◦Windows Server 2008

◦Windows Server 2008 R2

Prerequisites 7

VMware

◦ESX Server 4.x

◦ESX Server 5.0

•HP DSM for MPIO

Windows Server 2003 R2 SP2◦

◦Windows Server 2008

◦Windows Server 2008 R2

HP P4000 Command-line interface (Cliq)

•10 MB available space

•Windows Server 2003 R2 SP2

•Windows Server 2008

•Windows Server 2008 R2

•Windows XP SP2

•Windows Vista

•Windows 7

Failover Manager for VMware ESX Server

•VMware ESX Server version 4.x or later

•Microsoft .Net 2.0 or later on the installer client

•1 GB RAM

•Bridged connection through the VMware Console, or assigned network in VI Client

•15 GB of disk space

Failover Manager for Microsoft Hyper-V Server

•Windows Server 2008 versions

2008 R2 Standard◦

◦2008 R2 Enterprise

◦2008 R2 Datacenter

◦2008 R2 Server Core

◦2008 SP2, except for Core, which is not supported

•15 GB available drive space on Windows server for the Failover Manager

•Hyper-V role installed and running

•At least 1 GB of memory reserved for the Failover Manager

•A single virtual CPU with at least 2000 MHz reserved

Version requirements

To upgrade to Version 9.5 SAN/iQ software, the storage systems must be at Version 7.0.01 SP1 or

later. If the storage systems are at a lower version, please contact Customer Support for access to the

interim upgrade files. Refer to “HP technical support” (page 16) for customer support contact information.

8 Version requirements

If you are upgrading to Version 9.5 from Version 7.0 SP1, online upgrades will automatically apply

upgrades first to Version 8.0 and then to Version 9.5.

Required version of the Microsoft iSCSI Software Initiator - version 2.08 (or later)

Upgrading the SAN

Release Versions 9.x have automatic online upgrades. To begin using the online upgrades feature,

you must first install the Version 9.x CMC. You can download the latest CMC from

www.hp.com/go/P4000downloads

Install the CMC and begin using the online upgrades as described in the rest of this section.

Upgrade planning

Review the planning checklist to ensure you are prepared to upgrade your storage systems and SAN.

Table 1 Upgrade planning checklist

Information and InstructionsUpgrade Task

Use “Supported upgrade paths” (page 3) to determine if

there is a direct upgrade path for your storage systems, or if

Verify the software version you are currently running and the

upgrade path to the new release software.

you have to upgrade to an 8.x version before upgrading to

Version 9.5.

If you are running iSCSI load balancing, you must have a

Virtual IP Address configured on each cluster.

Are you running iSCSI load balancing? Verify that each

cluster has a VIP configured.

The SAN/iQ software upgrade will reboot the storage system.

Therefore, for volumes to remain online during the upgrade

Plan for volume access and the impact to iSCSI sessions that

the upgrade will have.

process, they must be Network RAID-5 or higher. Volumes

that are Network RAID-0 should be disconnected (logged off)

from the application server(s). Rebooting the storage system

will cause all iSCSI sessions on that storage system to be

terminated and recovered to one of the remaining storage

systems in the cluster. Consequently, application IO to the

volume may stop until the iSCSI session is recovered. Consider

upgrading during off-peak time (if possible) to avoid

application impact.

The actual time to upgrade a storage system or a

management group depends on the specific platform(s) and

configuration.

Schedule time for upgrade.

Upgrade the components in the following order:Upgrading the CMC, the SAN/iQ software, and the Solution

Pack components. 1. The CMC, including CLI, MIBs and FOM.

2. Any patches or other components as indicated during the

Upgrade process, in the Install Action Required window.

3. The DSM for MPIO

If you are running Version 7.x of the HP P4000 DSM for

MPIO , the installer prompts you to first uninstall that

version before installing the current version.

4. The SAN/iQ software.

5. The remaining Solution Pack components, as required.

Plan to save the upgrade information. After the upgrade, a

window opens that allows you to export the upgrade

Keep log files and the support bundle

information to a file. Also keep the Storage System Support

Bundle. You will need these if you call Support.

Performing the upgrade

1. Select Configuration Summary in the Navigation pane of the CMC.

2. Select the Upgrades tab.

Upgrading the SAN 9

3. Click Start Download to begin the upgrade process.

4. Upgrade the CMC.

5. When the CMC is upgraded and restarted, return to the Upgrades tab. Click Continue for each

management group that shows Upgrades Available.

For the P4000 CLI:

1. Ensure that you have Administrator privileges before beginning the upgrade.

2. Use the appropriate package installer that is downloaded from the Upgrades feature.

Double-click the .exe to start the installation wizard.

3. Click Install.

Using Advanced upgrades

Using the Normal Upgrade Selection Mode, all patches available are applied to the storage system.

Using the Advanced Upgrade Selection Mode allows you to apply individual patches to the current

version of SAN/iQ software, or to upgrade to a specific software version that is not necessarily the

latest version.

If patches are available for the current version of SAN/iQ, and have not been applied, they will be

listed in the Package Selection window when upgrading storage systems.

To use Advanced upgrades

1. Click Help→Preferences.

2. On the Preferences window, select Upgrades.

3. On the pane, select Advanced for the Upgrade Selection Mode.

4. Click OK.

Upgrading software in an offline environment

Downloading files

1. Install the Version 9.5 CMC on a computer that can connect to the Internet outside of a firewall.

2. Start the CMC.

3. Select Configuration Summary and click the Upgrades tab. Click Start Download to download

all the upgrade and patch files to the computer where the CMC is installed.

4. Click Help→Preferences→Upgrades.

5. Note the download directory. This is where all the upgrade files were downloaded. The default

location in Microsoft Windows is Program Files→HP→P4000→UI→downloads.

6. Close the CMC.

7. Return the computer to your own network.

8. Copy the downloaded files to a network share location or to portable media, or use the CMC on

that computer to upgrade your storage systems. If you do copy the files to a network location,

any CMC you use to do upgrades must point to that network location to see the files.

a. Click Help→Preferences→Upgrades.

b. Browse to the network location where you copied the files.

c. Click OK to close the Preferences window and continue with the upgrade.

Upgrading using an offline directory

The option to use local media is only available if the CMC can’t connect to the FTP server.

1. Start the CMC.

2. Select Configuration Summary and click the Upgrades tab.

3. Click Use Local Media.

4. Choose the network directory where you stored the files, and proceed with the upgrades.

10 Upgrading the SAN

Andere Handbücher für Storevirtual 4000

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HP Lagerung Handbücher

HP D2D Bedienungsanleitung

HP DW017B - StorageWorks Ultrium 448 Tape Drive Bedienungsanleitung

HP Surestore 6164 - Switch Bedienungsanleitung

HP C7401A - SureStore Ultrium 230 Tape Drive Bedienungsanleitung

HP P9000 Bedienungsanleitung

HP StoreEver MSL4048 Bedienungsanleitung

HP Colorado Trakker 250 Bedienungsanleitung

HP Surestore 64 - Director Switch Bedienungsanleitung

HP 3PAR StoreServ 7000 Bedienungsanleitung

HP StorageWorks 1606 - Extension SAN Switch Bedienungsanleitung

HP MSL4048 - StorageWorks Ultrium 920 Tape... Bedienungsanleitung

HP StorageWorks 8000 - NAS Bedienungsanleitung

HP LeftHand P4000 - SAN Solutions Beilage

HP Surestore Disk Array 12h - And FC60 Bedienungsanleitung

HP StorageWorks P4000 Series Bedienungsanleitung

HP AD510A - StorageWorks Modular Smart Array 1500 cs 2U Fibre Channel SAN Attach Controller Shelf Hard... Bedienungsanleitung

HP Data Vault Technisches Datenblatt

HP StorageWorks NAS b2000 - v2 Betriebsanleitung

HP StorageWorks 1000 - Modular Smart Array Gebrauchs- und Pflegehandbuch

HP P9000 Bedienungsanleitung

HP StorageWorks P2000 Bedienungsanleitung

HP StorageWorks 400r All-in-One Gebrauchsanweisung

HP Storevirtual 4000 Bedienungsanleitung

HP M8502 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung

Dell

Dell PowerVault MD3600f Series Bedienungsanleitung

CFI

CFI TERA STOR SATA RAID IV Bedienungsanleitung