HP StorageWorks SB920c Tape Blade Montageanleitung

Product End-of-Life Disassembly Instructions

Product Category: Data Storage Devices

Marketing Name / Model

[List multiple models if applicable.]

HP StorageWorks SB920c Tape Blade / AJ401A

HP StorageWorks Ultrium 448c Tape Blade / 440947-B21

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU

directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as

applicable.

Item Description Notes

Quantity

of items

included

in product

Printed Circuit Boards (PCB) or Printed Circuit

Assemblies (PCA) With a surface greater than 10 sq cm

Main PCA

Reel Motor PCA

Batteries All types including standard alkaline and lithium coin

or button style batteries 0

Mercury-containing components For example, mercury in lamps, display backlights,

scanner lamps, switches, batteries 0

Liquid Crystal Displays (LCD) with a surface greater

than 100 sq cm Includes background illuminated displays with gas

discharge lamps 0

Cathode Ray Tubes (CRT) 0

Capacitors / condensers (Containing PCB/PCT) 0

Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height 0

External electrical cables and cords 0

Gas Discharge Lamps 0

Plastics containing Brominated Flame Retardants 0

Components and parts containing toner and ink,

including liquids, semi-liquids (gel/paste) and toner Include the cartridges, print heads, tubes, vent

chambers, and service stations. 0

Components and waste containing asbestos 0

Components, parts and materials containing

refractory ceramic fibers 0

Components, parts and materials containing

radioactive substances 0

EL-MF877-00 Page 1

Template Revision A

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components

and materials requiring selective treatment can be removed.

Tool Description Tool Size (if

applicable)

Torx screwdrivers T-5, T-8, T-10,

T15

Crosshead screwdriver / knife NA

Scissors NA

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

3.1.1 Remove top cover (T15). Image 1

3.1.2 Remove top cover retaining bracket (T15). Image 2

3.1.3 Remove Power cable and I/O connection from the tape drive. Image 3

3.1.4 Remove the tape drive from the sheet metal by pinching the retainers inward while pulling outward

on the tape drive. ( Disassembly of the tape drive is detailed below starting at 3.1.13). image 4

3.1.5 Loosen the thumb screw (T15) holding the sheet metal for the main logic PCA to the main sheet metal and

slide the tray out several inches. Image 5

3.1.6 Remove the power cable, LED connector, I/O cable and air foil from the main logic board. Image 6

3.1.7 Fully remove the PCA sheet metal tray from the main sheet metal.

3.1.9 Remove the T15 retaining screw holding the HBA to the main logic board. Image 7

3.1.10 Remove the HBA by sliding outward away from the connector.

3.1.11 Remove the main logic PCA by removing the 5 (T15) screws which attach the PCA to the sheet metal. Image 8

3.1.12 Remove the LED bezel from the front of the sheet metal. Image 9

Specific steps for the Tape drive:

3.1.13. Clip off front panel. Image 10

3.1.14. Remove lid by removing 4 x T-8 screws. See image 11.

3.1.15. Remove main PCA. Disconnect 3 x FPCs and lift out the PCA - > 10 square cm’s. See image 12.

3.1.16. Remove the

reel motor PCA - > 10 square cm’s. Remove take up reel – use a pair of scissors to cut the tape;

remove grab stop; move carrier approximately 2 cm into the mechanism and slide out the reel motor PCA.

See images (13-16).

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items

contained in the product that require selective treatment (with descriptions and arrows identifying locations).

(1)

(2)

EL-MF877-00 Page 2

Template Revision A

(3)

(4)

(5)

(6)

(7)

(8)

(9)

EL-MF877-00 Page 3

Template Revision A

(10)

(11)

(12)

Ultrium 1, 2 & 3 half height tape drive Remove 4 x T-8 screws to remove the lid. Main PCA > 10 square cm’s

Main PCA > 10

square cm’s

EL-MF877-00

Template Revision A Page 4

13)

Remove the take up reel. 3 x T-5 screws

and 1 x T-10.

14)

Remove 6 x T-8 and 3 x T-5 screws from rear of

mech.

15)

Move carrier approximately 2cm into the

mechanism – direction of the arrow.

REEL MOTOR PCA

> 10 square cm’s

16)

Reel motor PCA > 10 square cm’s.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HP Lagerung Handbücher

HP dat72 5242 Bedienungsanleitung

HP Surestore 64 - Director Switch Bedienungsanleitung

HP 3PAR StoreServ 7200 2-node Gebrauchs- und Pflegehandbuch

HP 88780B Bedienungsanleitung

HP RDX REMOVABLE DL380 Gebrauchsanweisung

HP StorageWorks XP10000 - Disk Array Bedienungsanleitung

HP StorageWorks 8B - FC Entry Switch Bedienungsanleitung

HP Surestore 100st - Archive Server Bedienungsanleitung

HP D2D Bedienungsanleitung

HP Ultrium 232e Bedienungsanleitung

HP 7906 Bedienungsanleitung

HP P2000 G3 Bedienungsanleitung

HP Invent EH853 Series Montageanleitung

HP StorageWorks MSA500 G2 Bedienungsanleitung

HP 6100 Leitfaden

HP AJ765A - StorageWorks RDX Removable Disk Backup... Bedienungsanleitung

HP StorageWorks 2000fc Leitfaden

HP StoreEasy 3830 Bedienungsanleitung

HP StoreEver Series Bedienungsanleitung

HP BAAD0010HBK-NHSN Bedienungsanleitung

HP StorageWorks 4000/6000/8000 - Enterprise Virtual... Bedienungsanleitung

HP StoreEver ESL G3 Bedienungsanleitung

HP StorageWorks NAS 8000 - Version 1.6.X Betriebsanleitung

HP StorageWorks 1000 - Modular Smart Array Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung

Dell

Dell PowerVault MD3600f Series Bedienungsanleitung

CFI

CFI TERA STOR SATA RAID IV Bedienungsanleitung