HP 6125G Installationshandbuch

HP 6125 Blade Switch Series

bout the HP 6125 Blade Command References

Part number: 5998-3163

Software version: Release 2103

Document version: 6W100-20120907

Legal and notice information

No part of this documentation may be reproduced or transmitted in any form or by any means without

prior written consent of Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice.

HEWLETT-PACKARD COMPANY MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS

MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE. Hewlett-Packard shall not be liable for errors contained

herein or for incidental or consequential damages in connection with the furnishing, performance, or

use of this material.

The only warranties for HP products and services are set forth in the express warranty statements

accompanying such products and services. Nothing herein should be construed as constituting an

additional warranty. HP shall not be liable for technical or editorial errors or omissions contained

herein.

About the HP 6125 Blade command references

The HP 6125 Blade command references describe the commands and command syntax options

available for the HP 6125 Blade Switch Series.

Command Reference Content

01 Fundamentals Command

Reference

Covers the commands for logging in to and setting up the switch. This

command reference includes:

•CLI (command privilege settings and CLI management commands)

•Logging in to the switch

•FTP

•TFTP client

•File management commands

•Configuration file management

•Software upgrade

•Device management

02 IRF Command Reference Covers IRF configuration commands, including IRF port binding,

member ID assignment, priority assignment, and MAD.

03 Layer 2—LAN Switching

Command Reference

Covers the commands for configuring Layer 2 technologies and

features in a LAN switched network. This command reference

includes:

•Ethernet interface

•Loopback and null interfaces

•Bulk configuring interfaces

•MAC address table

•MAC Information

•Ethernet link aggregation

•Port isolation

•Spanning tree

•BPDU tunneling

•VLAN

•Isolate-user-VLAN

•Voice VLAN

•GVRP

•QinQ

•VLAN mapping

•LLDP

•Service loopback group

•Layer 2 forwarding

Command Reference Content

04 Layer 3—IP Services Command

Reference

Covers the commands for configuring and managing IP addressing

(including static and dynamic IPv4 and IPv6 address assignment),

UDP helper, DNS, network performance optimization, ARP, and

interoperation between IPv4 and IPv6. This command reference

includes:

•ARP

•Gratuitous ARP

•Proxy ARP

•ARP snooping

•IP addressing

•DHCP relay agent

•DHCP client

•DHCP snooping

•BOOTP client

•IPv4 DNS

•IP performance optimization

•UDP Helper

•IPv6 basics

•DHCPv6

•Tunneling

05 Layer 3—IP Routing Command

Reference

Covers the commands for configuring routes for IPv4 and IPv6

networks of different sizes, route filtering, route control, and policy

based routing. This command reference includes:

•IP routing basics

•Static routing

•RIP

•OSPF

•IS-IS

•BGP

•IPv6 static routing

•RIPng

•OSPFv3

•IPv6 IS-IS

•IPv6 BGP

•Routing policy

•Policy-based routing

Command Reference Content

06 IP Multicast Command Reference

Covers the commands for Layer 3 IPv4 multicast protocols (IGMP,

PIM, MSDP, and MBGP), and Layer 3 IPv6 multicast protocols (MLD,

IPv6 PIM, and IPv6 MBGP), Layer 2 IPv4 multicast protocols (IGMP

snooping, PIM snooping, and multicast VLAN), and Layer 2 IPv6

multicast protocols (MLD snooping, IPv6 PIM snooping, and IPv6

multicast VLAN). This command reference includes:

•IGMP snooping

•PIM snooping

•Multicast VLAN

•Multicast routing and forwarding

•IGMP

•PIM

•MSDP

•MBGP

•MLD Snooping

•IPv6 PIM snooping

•IPv6 multicast VLAN

•IPv6 multicast routing and forwarding

•MLD

•IPv6 PIM

•IPv6 MBGP

07 ACL and QoS Command

Reference

Covers the commands for classifying traffic with ACLs, and allocating

network resources and managing congestions with QoS technologies

to improve network performance and network use efficiency. This

command reference includes:

•ACL

•QoS policy

•Priority mapping

•GTS and line rate

•Congestion management

•Congestion avoidance

•Aggregate CAR

Command Reference Content

08 Security Command Reference

Covers security feature commands. Available security features

include identity authentication (AAA), access security (802.1X, MAC

authentication and port security), secure management (SSH), and

attack protection (IP source guard, ARP attack protection, and URPF).

This command reference includes:

•AAA

•802.1X

•EAD fast deployment

•MAC authentication

•Port security

•User profile

•Password control

•Public key

•PKI

•SSH

•SFTP

•SCP

•SSL

•TCP attack protection

•IP source guard

•ARP attack protection

•ND attack defense

•URPF

•MFF

09 High Availability Command

Reference

Covers high availability commands for managing failure detection

and failover. Failure detection technologies focus on fault detection

and isolation. Failover technologies focus on network recovery. This

command reference includes:

•Ethernet OAM

•CFD

•DLDP

•RRPP

•Smart Link

•Monitor Link

•VRRP

•BFD

•Track

Command Reference Content

10 Network Management and

Monitoring Command Reference

Covers the commands that help you manage and monitor your

network, for example, manage system events, sample packets, assess

network performance, synchronize the clock for all devices with the

clock in the network, and test network connectivity. This command

reference includes:

•Ping, tracert, and system debugging

•NTP

•Information center

•SNMP

•RMON

•Port mirroring

•Traffic mirroring

•NQA

•sFlow

•IPC

Andere Handbücher für 6125G

Dieses Handbuch passt für folgende Modelle

Andere HP Schalten Handbücher

HP A7533A - Brocade 4Gb SAN Switch Base Bedienungsanleitung

HP AQ233B Gebrauchsanweisung

HP bh5700 Bedienungsanleitung

HP FlexFabric 5700 Bedienungsanleitung

HP S5830V2 Series Installationshandbuch

HP Aruba Instant On 1930 Montageanleitung

HP storageworks 2/32 Bedienungsanleitung

HP 400338-001 - KVM Switch Bedienungsanleitung

HP J9146A - ProCurve Switch 2910al-24G-PoE Bedienungsanleitung

HP Voltaire InfiniBand Grid Director 4200 QDR Bedienerhandbuch

HP 10500 series Bedienungsanleitung

HP KVM Server Console Switch G2 Bedienungsanleitung

HP 1405-5 Bedienungsanleitung

HP J4091A Installations- und Betriebsanleitung

HP GbE2c - Blc Layer 2/3 Fiber SFP Option Betriebsanleitung

HP StorageWorks 9100 - Extreme Data Storage... Bedienungsanleitung

HP 378927-B21 Gebrauchsanweisung

HP 6125G Bedienungsanleitung

HP 438031-B21 - 1:10Gb Ethernet BL-c Switch Benutzerhandbuch

HP 6125XLG Installationshandbuch

HP OV-UX Bedienungsanleitung

HP AdvanceStack Remote 2C Bedienungsanleitung

HP PROCURVE 2910AL Bedienungsanleitung

HP StoreFabric SN4000B Programmierhandbuch

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung