HP StorageWorks 2/140 - Director Switch Bedienungsanleitung

HP StorageWorks

Director release notes

Part number: AA–RTDVH–TE/958–000276–008

Eighth edition: (August 2005)

Legal and notice information

Hewlett-Packard Company makes no warranty of any kind with regard to this material, including, but not limited to, the

implied warranties of merchantability and ﬁtness for a particular purpose. Hewlett-Packard shall not be liable for errors

contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of

this material.

This document contains proprietary information, which is protected by copyright. No part of this document may be

photocopied, reproduced, or translated into another language without the prior written consent of Hewlett-Packard. The

information contained in this document is subject to change without notice.

Microsoft®, MS Windows®, Windows®, Windows NT®, and Windows Server® are U.S. registered trademarks of

Microsoft Corporation.

Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein. The information

is provided “as is” without warranty of any kind and is subject to change without notice. The warranties for Hewlett-Packard

Company products are set forth in the express limited warranty statements for such products. Nothing herein should be

construed as constituting an additional warranty.

Printed in the U.S.A.

Director release notes

About this document

These release notes contain late breaking and supplemental information for the Director

2/64 and Director 2/140.

Be sure to read these release notes before installing a Director 2/64 and Director 2/140.

This information is periodically updated and available on the following HP web site:

http://www.hp.com/country/us/eng/prodserv/storage.html.

This section describes the content reﬂected in this document, including:

• Release notes information

• Intended audience

•Firmwarev

ersion 07.01.02-4

• Other director documentation

•CD-ROMdirectorystructure

• Supportedconﬁgurations

• Cable requirements

•Importantinformation

•Knownis

sues

Release notes information

These release notes cover the following major topics:

• HSG80 transparent mode not recommended with controller in SCSI-3 mode

with HP-UX operating systems

• HSG80 transparent mode not recommended with controller in SCSI-3 mode with

• ISL disconnect causes NOS error with the OpenVMS operating systems

• Support for speed Auto-Negotiate

• Ports may accumulate spurious events

• Possible switch reset after power failure or power off sequence

•SNMPissues

Intended audience

This document is intended for customers who purchased the Director 2/64 or Director

2/140.

Firmware version 07.01.02-4

Firmware 07.01.02-4 is the latest (as of this date), ﬁrmware released with the

Director 2/64 and Director 2/140. The latest ﬁrmware is available on the following HP

web site: http://h18006.www1.hp.com/storage/saninfrastructure.html.

Director release notes 1

For more information on upgrading ﬁrmware versions, refer to the appropriate

HP StorageWorks director service manual. The features of this ﬁrmware version are

detailed in the following manuals.

Otherdirectordocumentation

In addition to these release notes, HP provides the following corresponding information:

•HP StorageWorks Director Element Manager Licensing Instructions,

AA-RVHAA-TE/958-000282-000

•HP StorageWorks Director Torque Tool Caution Flyer,AA-RTDEC-TE/958-

000282-002

•HP StorageWorks Director Power Cord Advisory, AA-RTDMC-TE/958-000279-

002

•HP StorageWorks Universal Port Module Kit Installation Instructions,

AA-RSS2D-TE/958-000281-002

•HP StorageWorks Director 2/140 Installation Guide,AA-RTDSD-TE/958-

000275-003

•McDATA Intrepid Director 6140 Installation and Service Manual,

620-000157-410

•HP StorageWorks Director Element Manager User Guide,AA-RTDUD-TE

•HP StorageWorks Director 2/64 Installation Guide,AA-RSNGE-TE/958-

000289-003

•McDATA Intrepid Director 6064 Installation and Service Manual,

620-000108-920

•HP StorageWorks M-Series Rack Mount Kit Installation Instructions,

AA-RQZPE-TE/958-000292-002

•McDATA Enterprise Operating System Command Line Interface User Manual,

620-000134-720

•McDATA EOS SNMP Support Manual, 620-000131-620

•McDATA Products in a SAN Environment Planning Manual, 620-000124-500

•HP StorageWorks SAN Design Guide, AA-RMPNT-TE

•McDATA SANpilot User Manual, 620-000160-230

•HP StorageWorks HA-Fabric Manager User Guide,AA-RS2CF-TE

•HP StorageWorks HA-Fabric Manager Transition Guide,AA-RV1MB-TE

•HP StorageWorks HA-Fabric Manager Appliance Installation Guide,

AA-RU5FC-TE/958-000324-002

•HP StorageWorks HA-Fabric Manager Release Notes,AA-RUR6E-TE/958-

000288-009

•HP StorageWorks Director and Edge Switch Glossary,AA-RU5JB-TE

•HP StorageWorks C-FCSWAPI SDK Bridge Agent Installation Instructions,

AA-RVJ1B-TE/958-000405-001

•HP StorageWorks Director release notes, AA-RTDVG-TE/958–000276–007

CD-ROM directory structure

The HP StorageWorks director documentation and ﬁrmware CD contains the following

items:

•Manuals.pdf—HP StorageWorks Director 2/64 and Director 2/140

Documentation; links to the following documents and search function

•Documents

•README.TXT—HP document structure; late-breaking doc changes

•AA-RTDSD-TE/

958-000275-003—HP StorageWorks Director 2/140

Installation Guide

• 620-000157-410—McDATA Intrepid Director 6140 Installation and Service

Manual

•AA-RTDUD-TE—HP StorageWorks Director Element Manager User Guide

• AA-RSNGE-TE/958-000289-003—HP StorageWorks Director 2/64

Installation Guide

• 620-000108-920—McDATA Intrepid Director 6064 Installation and Service

Manual

• 620-000134-720—McDATA Enterprise Operating System Command Line

Interface User Manual

• 620-000131-620—McDATA EOS SNMP Support Manual

• 620-000124-500—McDATA Products in a SAN Environment Planning

Manual

• AA-RMPNT-TE—HP StorageWorks SAN Design Guide

• 620-000160-230—McDATA SANpilot User Manual

•AA-RU5F

C-TE/958-000324-002—HP StorageWorks HA-Fabric Manager

Appliance Installation Guide

•AA-RS2CF-TE—HP StorageWorks HA-Fabric Manager User Guide

•AA-RV1

MB-TE—HP StorageWorks HA-Fabric Manager Transition Guide

•AA-RU5JB-TE—HP StorageWorks Director and Edge Switch Glossary

• AA-RVJ1B-TE/958-000405-001—HP StorageWorks C-FCSWAPI SDK Bridge

Agent Installation Instructions

•Firmware

•HPQ_MSF_v07.00.00-84.bin—HP StorageWorks M-Series ﬁrmware

•firmwareupdate.txt—Instructions for updating ﬁrmware

•Acrobat

•RP505ENU.EXE—Windows installation ﬁleforAcrobatReader5.0with

Director release notes 3

Supported conﬁgurations

Operation of multiple switches in a fabric topology is subject to the following topology

limits. Consider the impact of these limits when planning the fabric.

NOTE:

For more information about planning the fabric, refer to HP StorageWorks SAN High

Availability Planning Guide.

•Fabric Elements—Each fabric element is deﬁned by a unique domain ID that

ranges between 1 and 31; therefore, the theoretical limit of interconnected

directors in a single fabric is 31. The supported limit of interconnected switches

inasinglefabricis24.Becausethisnumberissubjecttochange,contactyour

HP authorized service representative for the current number of interconnected

switches supported in a single fabric.

•Inhomogeneous fabric—To determine if interoperability is supported for a

product, or if restrictions apply, refer to the product publications, or contact your

HP authorized service representative.

•Number of Interswitch Links (ISLs)—The maximum supported number of ISLs is

75% of installed ports for the Director 2/64, and 50% of installed ports for

the Director 2/140. For redundancy, at least two ISLs should connect any

two director-class fabric elements. Because this number is subject to change,

contact your HP authorized service representative for the current number of ISLs

supported per director.

•Hop Count—The Fibre Channel theoretical limit of ISL connections traversed (hop

count) in a single path through a fabric is seven. The maximum supported hop

count in a single path through a fabric is three. Because this number is subject to

change, contact your HP authorized service representative for the current hop

count supported by a single fabric path.

The hop count is equal to the number of ISL connections traversed in a single

path, not the total number of ISL connections between devices.

Cable requirements

NOTE:

Optical cables for the Director 2/64 and Director 2/140 must be ordered separately.

For cables measuring up to 500 meters (1 Gbps) or 300 meters (2 Gbps), use multi-mode

Fibre Channel cables. For longer cables, use single-mode Fibre Channel cables.

Multi-mode optical cables are connected to short-wave optical transceiver modules in

a switch. Single-mode optical cables are connected to long-wave optical transceiver

modules in a switch. Multi-mode cables should use 50/125 optical ﬁbers, and

single-mode cables typically use 9/125 optical ﬁbers for distances up to 10 km.

Verify that connectors interfacing with the Director 2/64 and Director 2/140 use LC

Duplex connectors with a PC ﬁnish. In addition, the connector at the opposite end

of the cable must be of either LC or SC type, depending on the requirements of the

connected device.

Important information

This section describes important information related to the Director 2/64 and

Director 2/140.

Minor Code Enhancements and Fixes in fw 07.01.02-4

This release of ﬁrmware version 07.01.02-4 incorporates some minor code enhancements

and ﬁxes, and is not a mandatory upgrade, though HP recommends that all directors

and edge switches be upgraded to this version of ﬁrmware. Firmware release 07.01.02-4

is based on ﬁrmware 07.00.00-84, and contains all ﬁxes included in that version and

prior releases. The following are now incorporated in ﬁrmware version 07.01.02-4.

Directors take new action upon detecting a failed UPM port module

A particular type of failure in director UPM port modules could be disruptive to other

port modules in a director. In the release of ﬁrmware 07.01.02-4, the action taken by

the director upon detecting this type of failure was changed to power off the failed port

module to prevent it from affecting other working port modules.

Embedded Web Server zoneset activation timeout issue resolved

Under certain conditions, the Embedded Web Server (EWS) would sometimes not allow

theZoneManagersubsystemenoughtimetoprocessaconﬁguration change request.

This would cause EWS to time out when waiting for the Zone Manager to respond.

When this occurred, the Zone Manager could hang indeﬁnitely, preventing any further

zone activities from any management location. This timeout issue has been ﬁxed.

Director release notes 5

Zonesets containing domain/port number zones while in Open Fabric interop mode no longer

cause zoning to hang

When directors and edge switches in a fabric were conﬁgured for Open Fabric 1.0

interop mode, and the fabric’s zoneset contained a zone with members deﬁned by

domain/port number instead of World Wide Name, activating changes to the zoneset

could cause the Zone Manager to hang. When this occurred, the Zone Manager could

hang indeﬁnitely, preventing any further zone activities from any management location.

It should be noted that domain/port number zones are not supported in Open Fabric

1.0 interop mode, and are ignored. The Zone Manager will no longer hang under these

conditions, and these zones are still ignored in Open Fabric 1.0 interop mode.

Occasional Ethernet hang issue is resolved

Under certain conditions, the Ethernet communications could intermittently hang on

director 2/140, edge switch 2/24, and edge switch 2/12. This issue has been

corrected.

Features not supported in this release

The following director and edge switch feature is not supported in this release:

•SANtegrity Authentication

The following HAFM features are not supported in this release:

•SANtegrity Security Center

•Group Conﬁguration Manager

These features are described in the documentation released with ﬁrmware 07.00.00 and

HAFM 08.06.00. Some of these features may be available in a future release.

Documentation released with ﬁrmware 07.00.00 and HAFM 08.06.00

To support these products, we are providing documentation from both McDATA

Corporation (the product developer) and from HP (the product OEM). The HP documents

include all information HP has incorporated into the products to date. The McDATA

documents include only the basic product information.

Table 1 shows HP terminology and McDATA Corporation equivalents used in the

McDATA documents.

Table 1 HP and McDATA terminology

HP term McDATA term

HP StorageWorks Edge Switch 2/12 Sphereon 4300 Fabric Switch

HP StorageWorks Edge Switch 2/16 Sphereon 3216 Fabric Switch

HP StorageWorks Edge Switch 2/24 Sphereon 4500 Fabric Switch

HP StorageWorks Edge Switch 2/32 Sphereon 3232 Fabric Switch

HP StorageWorks Director 2/64 Intrepid 6064 Director

HP StorageWorks Director 2/140 Intrepid 6140 Director

Embedded Web Server (EWS) SANpilot

HA-Fabric Manager (HAFM) Enterprise Connectivity Manager (EFCM)

Firmware Enterprise Operating System (E/OS)

HAFM Appliance EFC Server

Director release notes 7

HAFM and ﬁrmware compatibility

Table 2 lists the minimum version of HAFM that can run with the various versions of

ﬁrmware for the directors and edge switches.

Table 2 HAFM and ﬁrmware compatibility

Firmware version HAFM version (minimum)

01.01.02 04.00.01 (HP EFCM)

01.02.02-06 04.01.02-14 (SDCM)

01.03.00-35 04.02.00-40 (HP EFCM)

01.04.00-01 04.02.00-40 (SDCM)

02.00.00-33 06.00.00-45 (HP EFCM)

02.00.02-01 06.00.02-06

04.01.02-04 06.03.01-05

05.02.00-13 07.01.00-09 (Notebook Server)

05.02.00-13 07.02.00-09 (HAFM Appliance)

05.05.00-12 None (Edge Switch 2/12)

06.01.00-18 07.01.00-09 (Notebook Server)

06.01.00-18 07.02.00-09 (HAFM Appliance)

06.01.00-18 08.02.00 recommended (HAFM Appliance)

06.02.00-22 07.01.00-09 (Notebook Server)

06.02.00-2207.02.00-09 (HAFM Appliance)

06.02.00-22 08.02.00 recommended (HAFM Appliance)

07.00.00-84 07.01.00-09 (Notebook Server)

07.00.00-84 07.02.00-09 (HAFM Appliance)

07.00.00-84 08.06.00 recommended (HAFM Appliance)

07.01.02–4 07.01.00-09 (Notebook Server)

07.01.02–4 07.02.00-09 (HAFM Appliance)

07.01.02–4 08.06.00 recommended (HAFM Appliance)

Andere Handbücher für StorageWorks 2/140 - Director Switch

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HP Schalten Handbücher

HP E5400 zl Series Bedienungsanleitung

HP ProCurve 2810-24G Bedienungsanleitung

HP HP E1368A/69A/70A Bedienungsanleitung

HP ProCurve 1810G-8 Bedienungsanleitung

HP Compaq Presario,Presario 1910 Bedienungsanleitung

HP ProCurve 1600M Bedienungsanleitung

HP ProCurve 6120G/XG Bedienungsanleitung

HP V1905-24 Bedienungsanleitung

HP 316095-B21 - StorageWorks Edge Switch 2/24 Bedienungsanleitung

HP SN6000B Programmierhandbuch

HP 2/8q Fibre Channel Bedienungsanleitung

HP zl Bedienungsanleitung

HP 5830AF-48G Series Montageanleitung

HP Deskjet 870 Bedienungsanleitung

HP 6127XLG Blade Series Installationsanleitung

HP 5500 EI series Bedienungsanleitung

HP J3108A Bedienungsanleitung

HP J1473A Bedienungsanleitung

HP 4800G Series Bedienungsanleitung

HP AA-RS2WC-TE Bedienungsanleitung

HP 6125G Bedienungsanleitung

HP 1410 series Bedienungsanleitung

HP 6125XLG Bedienungsanleitung

HP C-Series Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung