HP 16533A Handbuch

Programmer’s Guide

Publication number 16534-97004

First edition, August 1995

For Safety information, Warranties, and Regulatory

information, see the pages behind the index

Copyright Hewlett-Packard Company 1987, 1990, 1991, 1993, 1994, 1995

HP 16533A 1-GSa/s and

HP 16534A 2-GSa/s Digitizing

Oscilloscope

In This Book

This guide, combined with the HP

16500B/16501A Programmer’s Guide,

provides you with the information needed

to program the HP 16533/34A

oscilloscope module. Each module has

its own reference to supplement the

mainframe manual since not all

mainframes will be configured with the

same modules.

Chapter 1 contains:

•Mainframe system commands that are

frequently used with the oscilloscope

module

•HP 16533/34A Oscilloscope command

tree

•Alphabetic command-to-subsystem

directory

Chapter 2 contains module level

commands.

Chapters 3 through 10 contain the

subsystem commands for the oscilloscope.

Chapter 11 contains program examples of

actual tasks that show you how to get

started in programming the HP

16533/34A oscilloscope. These examples

are written in HP BASIC 6.2; however,

the program concepts can be used in any

other popular programming language that

allows communications with either the

HP-IB or RS-232C buses.

Error messages for the HP 16533/34A are

included in generic system error

messages and are in the HP

16500B/16501A Programmer’s Guide.

Programming the HP 16533/34A

Module Level Commands

ACQuire Subsystem

CHANnel Subsystem

DISPlay Subsystem

MARKer Subsystem

MEASure Subsystem

TIMebase Subsystem

TRIGger Subsystem

WAVeform Subsystem

Programming Examples

Index

iii

Contents

1 Programming the HP 16533/34A Oscilloscope Module

Introduction 1–2

Selecting the Module 1–3

Setting up an Oscilloscope 1–3

Mainframe Commands 1–5

Command Set Organization 1–9

Module Status Reporting 1–10

MESE <N> 1–11

MESR <N>? 1–13

2 Module Level Commands

AUToscale 2–3

DIGitize 2–4

VARiation 2–5

3 ACQuire Subsystem

Introduction 3–2

COUNt 3–4

TYPE 3–5

4 CHANnel Subsystem

COUPling 4–5

ECL 4–6

OFFSet 4–7

PROBe 4–8

RANGe 4–9

TTL 4–10

Contents–1

5 DISPlay Subsystem

ACCumulate 5–4

CONNect 5–4

INSert 5–5

LABel 5–7

MINus 5–8

OVERlay 5–8

PLUS 5–9

REMove 5–9

6 MARKer Subsystem

Introduction 6–2

AVOLt 6–6

ABVolt? 6–7

BVOLt 6–7

CENTer 6–8

MSTats 6–8

OAUTo 6–9

OTIMe 6–10

RUNTil 6–11

SHOW 6–12

TAVerage? 6–12

TMAXimum? 6–13

TMINimum? 6–13

TMODe 6–14

VMODe 6–15

VOTime? 6–16

VRUNs? 6–16

VXTime? 6–17

XAUTo 6–18

XOTime? 6–19

XTIMe 6–19

Contents

Contents–2

7 MEASure Subsystem

Introduction 7–2

ALL? 7–5

FALLtime? 7–6

FREQuency? 7–6

NWIDth? 7–7

OVERshoot? 7–7

PERiod? 7–8

PREShoot? 7–8

PWIDth? 7–9

RISetime? 7–9

SOURce 7–10

VAMPlitude? 7–11

VBASe? 7–11

VMAX? 7–12

VMIN? 7–12

VPP? 7–13

VTOP? 7–13

8 TIMebase Subsystem

DELay 8–4

MODE 8–5

RANGe 8–6

9 TRIGger Subsystem

CONDition 9–5

DELay 9–7

LEVel 9–8

LOGic 9–10

MODE 9–11

PATH 9–12

SLOPe 9–12

SOURce 9–13

Contents

Contents–3

10 WAVeform Subsystem

Format for Data Transfer 10–4

Data Conversion 10–6

COUNt? 10–9

DATA? 10–9

FORMat 10–10

POINts? 10–10

PREamble? 10–11

RECord 10–12

SOURce 10–12

SPERiod? 10–13

TYPE? 10–13

VALid? 10–14

XINCrement? 10–15

XORigin? 10–16

XREFerence? 10–16

YINCrement? 10–17

YORigin? 10–17

YREFerence? 10–18

11 Programming Examples

Introduction 11–2

Digitizing Waveform Data 11–3

Using the MEASURE ALL? Query 11–4

Combined Measurement Example 11–5

Contents

Contents–4

Programming the

HP 16533/34A Oscilloscope

Module

Introduction

This chapter introduces you to the basic command structure used to

program the oscilloscope. Also included is an example program that

displays a waveform and makes automatic parametric measurements.

Additional program examples are in chapter 11.

1–2

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Beliebte Prüfgeräte Handbücher anderer Marken

SMART

SMART KANAAD SBT XTREME 3G Series Bedienungsanleitung

Agilent Technologies

Agilent Technologies BERT Serial Bedienungsanleitung

Agilent Technologies

Agilent Technologies N3280A Bedienungsanleitung

Lifeloc

Lifeloc R.A.D.A.R. Bedienungsanleitung

Fluke

Fluke T5-600 Bedienungs- und Montageanleitung

Mercury

Mercury TSL01 Bedienungsanleitung

MAHA

MAHA MBT Series Bedienungsanleitung

Fuji Electric

Fuji Electric P-61 Bedienungsanleitung

ETC

ETC SealerAtor Bedienungsanleitung

Skyfine

Skyfine ETHYWAY V2 Bedienungsanleitung

Appion

Appion G5 Twin Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 8159-0112A Bedienungsanleitung

BW Technologies

BW Technologies MicroDock II Bedienungsanleitung

Sun Nuclear

Sun Nuclear 1027 Bedienungsanleitung

Biomark

Biomark HPR LITE READER Bedienungsanleitung

Hioki

Hioki 3169-20 Bedienungsanleitung

Ashcroft

Ashcroft ATE-100 Bedienungsanleitung

Rohde & Schwarz

Rohde & Schwarz RTA4000 Bedienungsanleitung