HP R1500 Montageanleitung
Product End-of-Life Disassembly Instructions
Product Category: Other Products
Marketing Name / Model
[List multiple models if applicable.]
HP R1500 G4 NA UPS
HP R1500 G4 JP/TWN UPS
Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions
for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU
directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).
1.0 Items Requiring Selective Treatment
1.1 Items listed below are classified as requiring selective treatment.
1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as
applicable.
Item Description Notes
Quantity
of items
included
in product
Printed Circuit Boards (PCB) or Printed Circuit
Assemblies (PCA)
With a surface greater than 10 sq cm
2
Batteries
All types including standard alkaline and lithium coin
or button style batteries Lead-acid battery
3
Mercury-containing components
For example, mercury in lamps, display backlights,
scanner lamps, switches, batteries
0
Liquid Crystal Displays (LCD) with a surface greater
than 100 sq cm
Includes background illuminated displays with gas
discharge lamps
0
Cathode Ray Tubes (CRT)
0
Capacitors / condensers (Containing PCB/PCT)
0
Electrolytic Capacitors / Condensers measuring
greater than 2.5 cm in diameter or height
Electrolytic Capacitors
3
External electrical cables and cords
2
Gas Discharge Lamps
0
Plastics containing Brominated Flame Retardants
weighing > 25 grams (not including PCBs or PCAs
already listed as a separate item above)
0
Components and parts containing toner and ink,
including liquids, semi-liquids (gel/paste) and toner
Include the cartridges, print heads, tubes, vent
chambers, and service stations.
0
Components and waste containing asbestos
0
Components, parts and materials containing
refractory ceramic fibers
0
EL-MF877-00 Page 1
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Components, parts and materials containing
radioactive substances
0
2.0 Tools Required
List the type and size of the tools that would typically be used to disassemble the product to a point where components
and materials requiring selective treatment can be removed.
Tool Description
Tool Size (if
applicable)
Star Head Screw Driver
M3
Cross Head Screw Driver
M3,M4
Plastic Nipper
Normal
Nut Driver
M4
Electric Iron
Normal
3.0 Product Disassembly Process
3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:
1. Remove the middle bezel and left panel
2. Disconnect the battery connector, and press on/off button to discharge the rest electricity.
3. Loosen the screws fixing the battery door, remove the battery door, and pull out the battery.
4. Loosen the screws fixing the right panel ASSY, and remove the right panel ASSY.
5. Disconnect the LCD cable and PCBA.
6. Loosen the screws fixing the top cover, and remove the top cover.
7. Disconnect the cables connecting to Slot box, AVR, rear FAN, COM PCBA, and rear panel ASSY, and disassemble
the cable clips sticking on the mainframe, and loosen the screws fixing the main PCBA, then remove the main PCBA .
8. Cut off the cable tie, disconnect the cable connecting to COM PCBA, loosen the nuts fixing the AVR, and then remove
the AVR.
9. Lossen the screws fixing rear panel ASSY and then remove the rear panel ASSY.
10. Remove the RPO connector, loosen the screws fixing SLOT box, COM PCBA and rear FAN, loosen the nut fixing
ground cable and then remove the Slot Box, COM PCBA and rear FAN, outlet.
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items
contained in the product that require selective treatment (with descriptions and arrows identifying locations).
EL-MF877-00 Page 2
Template Revision B
PSG instructions for this template are available at EL-MF877-01
7. Disconnect the cables connecting to Slot box, AVR, rear FAN, COM PCBA, and rear panel ASSY, and disassemble
the cable clips sticking on the mainframe, and loosen the screws fixing the main PCBA, then remove the main PCBA .
Disconnect all terminal
M4 Cross Screw driver
EL-MF877-00 Page 8
Template Revision B
PSG instructions for this template are available at EL-MF877-01
8. Cut off the cable tie, disconnect the cable connecting to COM PCBA, loosen the nuts fixing the AVR, and then
remove the AVR.
9. Loosen the screws fixing rear panel ASSY, and then remove the rear panel ASSY.
Nut driver
Cut off the cable tie
EL-MF877-00 Page 10
Template Revision B
PSG instructions for this template are available at EL-MF877-01
Andere Handbücher für R1500
10
Andere HP UPS Handbücher
HP
HP R7000 INTL Bedienungsanleitung
HP
HP J4367A - UPS R3000 XR Bedienungsanleitung
HP
HP UPS R5500 Gebrauchsanweisung
HP
HP R12000 XR Bedienungsanleitung
HP
HP AF446A Montageanleitung
HP
HP 326529-D71 Bedienungsanleitung
HP
HP T750 G2 Bedienungsanleitung
HP
HP AF452A Bedienungsanleitung
HP
HP RP36000/3 Bedienungsanleitung
HP
HP T750 Bedienungsanleitung
HP
HP R1500 Bedienungsanleitung
HP
HP HP StoreOnce G3 Bedienerhandbuch
HP
HP Enterprise R1500 G4 UPS Bedienungsanleitung
HP
HP R5000 Bedienungsanleitung
HP
HP StoreEver 1U Bedienungsanleitung
HP
HP PowerTrust A3589A Bedienungsanleitung
HP
HP T1000 XR Bedienungsanleitung
HP
HP R1500 Bedienungsanleitung
HP
HP R/T2200 G4 NA/JP Bedienungsanleitung
HP
HP R7000 INTL Bedienungsanleitung
Beliebte UPS Handbücher anderer Marken
Pylontech
Pylontech Victron & Pylontech US5000 Bedienungsanleitung
Tecnoware
Tecnoware EVO DSP PLUS MM 6.8 Bedienungsanleitung
Mecer
Mecer ME-1000-WTU Bedienungsanleitung
Mustek
Mustek PowerMust 530(B) Plus Installations- und Betriebshandbuch
Emerson
Emerson Liebert NXL series Bedienungsanleitung
MAKELSAN
MAKELSAN BOXER SERIES Bedienungsanleitung
