HP J9845A Gebrauchsanweisung

Models

HP 560 Wireless Dual Radio 802.11ac (AM) Access Point

J9845A

HP 560 Wireless Dual Radio 802.11ac (WW) Access Point

J9846A

HP 560 Wireless Dual Radio 802.11ac (JP) Access Point

J9847A

HP 560 Wireless Dual Radio 802.11ac (IL) Access Point

J9848A

Key features

Three-spatial stream 802.11acMIMOAP

Up to 1.3 Gb/s on the 802.11ac radio and 450 Mb/s on the 2.4 GHz 802.11n radio

Built-in spectral analysis scans the 2.4 GHz and 5 GHz bands to identify sources of RF

Comprehensive WLAN security with intrusion detection offers threat protection

Include lifetime hardware warranty 2.0 with 24x7 phone support for three years at no additional cost

Introduction

HP 560 802.11ac Dual Radio Access Points deliver 1.3 GbE performance, faster application processing and increased range, connecting

wireless clients to the network and bringing intelligence to the network edge.

HP 560 802.11ac Dual Radio Access Point Series bring 1.3 GbE performance, faster application processing, and increased range to

802.11 clients. Ideal for dense client environments and high bandwidth applications, the access points can be powered by Power over

Ethernet (PoE) and offer full compatibility with legacy 802.11 clients and existing HP wireless controllers.

The access points can be used in managed as well as autonomous* mode without a controller. The access points provide Radio

Frequency spectrum analysis with detection and classification of non-IEEE 802.11 interference and has the ability to automatically

avoid interference. Wireless security is comprehensive when operating with a controller; with integrated wireless IDS/IPS, support for

internal and external authentication, authorization, and accounting (AAA) servers; built-in stateful firewall; per-user VLAN mapping;

and authentication. Note: Autonomous mode support will be added later in 2014.

Features and benefits

Management

Wi-Fi Clear Connect

provides a system-wide approach to improving WLAN reliability by proactively determining and adjusting to changing RF

conditions; helps optimize WLAN performance by detecting interference from Wi-Fi and non-Wi-Fi sources using spectrum

analysis capabilities built into the access points, identifying rogue activity, and making decisions at a system-wide level.

Advanced radio resource management

Automatic radio power adjustments

include real-time power adjustments based on changing environmental conditions and signal coverage adjustment

Automatic radio channel

provides intelligent channel switching and real-time Interference detection

Intelligent client load balancing

determines number of clients across neighboring APs and adjusts client allocation to balance the load

Airtime fairness

provides equal RF transmission time for wireless clients

Spectrum analysis

QuickSpecs

HP 560 802.11ac Dual Radio Access Point Series

Overview

DA - 14918 Worldwide — Version 2 — April 29, 2014

Page 1

Power/frequency spectrum analysis

measures noise from IEEE 802.11 remote sources

Signal detection/classification

identifies source of RF interference, for example, Bluetooth®, cordless phones, and microwave ovens

Evaluation of channel quality

helps detect severe channel degradation and improve the reporting of poor RF performance

Integrated Wireless IDS/IPS

detects and locates and mitigates unknown and rogue devices (see controller datasheet for details)

Access point management

provides secure web browser (SSL and VPN), command-line interface, SNMP v2c, SNMP v3, MIB-II with traps, and RADIUS

Authentication Client MIB (RFC 2618); offers embedded HTML management tool with secure access (SSL and VPN); implements

scheduled configuration and firmware upgrades from a central controller

HP Intelligent Management Center and Wireless Services Manager Software

provides central management for discovery, logging, status, and configuration management

Diagnostics

records association, authentication, and DHCP events in client event log; packet capture tool for Ethernet and IEEE 802.11

interfaces (PCAP format); includes data rate matrix

Enhanced AP survivability

continues to operate using the old IP address while the AP searches for a new controller

Compatible with HP Unified Switches Controllers and Module

Refer to the HP Access Point—Controller Compatibility Matrix at

http://h20195.www2.hp.com/V2/GetDocument.aspx?

docname=4AA5-0345ENW&cc=us&lc=en

Refer to the release notes for minimum version numbers required.

Compatible with HP MSM Controllers

HP MSM720, MSM760, MSM765 zl and MSM775 zl Controller support will come later in 2014.

Quality of Service (QoS)

Rate limiting

supports per-wireless client ingress-enforced maximums and per-wireless client, per-queue guaranteed minimums

Centralized traffic

maintains Layer 2 and Layer 3 QoS settings when using centralized traffic or guest access

IEEE 802.1p prioritization

delivers data to devices based on the priority and type of traffic

Wireless

L2/L3/L4 classification

supports IEEE 802.1p VLAN priority, SpectraLink SVP, and DiffServ

Virtual Service Community (VSC)

assigns Wi-Fi MultiMedia (WMM), IEEE 802.11e EDCF, and Service-Aware priority

VoIP call capacity

supports 12 active calls per radio, maximum

SpectraLink Voice Priority (SVP) support

prioritizes SpectraLink voice IP packets sent from a SpectraLink NetLink SVP server to SpectraLink wireless voice handsets to

help ensure excellent voice quality

Connectivity

IEEE 802.3 Power over Ethernet (PoE)

simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in

supplying local power at each access point location

QuickSpecs

HP 560 802.11ac Dual Radio Access Point Series

Overview

DA - 14918 Worldwide — Version 2 — April 29, 2014

Page 2

802.3at the AP will operate with both radios at full performance, 3x3:3 MIMO mode

802.3af the 802.11a/n/ac 5 GHz radio will operate at full performance 3x3:3, while the 802.11b/g/n 2.4 GHz radio will run

in 2x2:2 MIMO mode

Auto-MDIX

adjusts automatically for straight-through or crossover cables on the Ethernet interface

Mobility

Three spatial stream MIMO technology

provides the latest in Wi-Fi technology, which allows for 1.3Gb/s in the 5GHz frequency band and 450 Mb/s in the 2.4GHz band of

signaling

Bandsteering

redirects 5 GHz-capable clients automatically to the less-congested 5 GHz spectrum

HP 560 embedded antennas

provides excellent coverage through use of embedded high-gain antennas (5 dBi antenna at 2.4 GHz and 7 dBi antenna at 5 GHz);

no need for the added cost of external antennas

Anywhere, anytime wireless coverage

dual-radio IEEE 802.11b/g/n and 802.11a/n/ac access point; per-radio software-selectable configuration of frequency bands;

self-healing, self-optimizing local mesh that extends network availability; Wi-Fi Alliance Certifications for interoperability with

all IEEE 802.11a/b/g/n/ac client devices

Medical standards

meets the European EN60601-1-2 standard for healthcare

Virtual Service Communities (VSCs)

includes up to 16 SSIDs per radio, each with unique MAC address and configurable SSID broadcasts; individual security and QoS

profiles per VSC; configurable DTIM and minimum data rate per VSC; VSCs that can be mapped to separate IEEE 802.1Q VLANs;

WMM and/or WMM-PS; a security filter; and an IP filter

AP client access control functions

offers IEEE 802.1X authentication using EAP-SIM, EAP-FAST, EAP-TLS, EAP-TTLS, and PEAP delivers MAC address

authentication using local or RADIUS access lists

provides RADIUS AAA using EAP-MD5, PAP, CHAP, and MS-CHAPv2

supports RADIUS Client (RFC 2865 and 2866) with location-aware support

provides Layer 2 wireless client isolation

Security

Integrated IDS support

Automated AP and client classification

reduces manual effort (administrator can override AP classification)

Comprehensive detection capabilities

detects a wide range of attacks

Flexible event reporting

enables configuration of which events will result in notifications

Location tracking capabilities

helps identify the rogue device location

Flexible deployment models

supports time slicing or dedicating a radio to detect full-time

see the controller datasheet for more detail

IEEE 802.1X support

provides port-based user authentication with support for Extensible Authentication Protocol (EAP) MD5, TLS, TTLS, and PEAP

with choice of AES, TKIP, and static or dynamic WEP encryption for protecting wireless traffic between authenticated clients and

the ccess point

QuickSpecs

HP 560 802.11ac Dual Radio Access Point Series

Overview

DA - 14918 Worldwide — Version 2 — April 29, 2014

Page 3

Choice of IEEE 802.11i, WPA2, or WPA

locks out unauthorized wireless access by authenticating users prior to granting network access; robust Advanced Encryption

Standard (AES) or Temporal Key Integrity Protocol (TKIP) encryption secures the data integrity of wireless traffic

TKIP/WEP encryption

is supported only on legacy IEEE 802.11a/b/g clients as it has been deprecated from the IEEE 802.11n and 802.11ac standards

Local wireless bridge client traffic filtering

prevents communication between wireless devices associated with the same access point

Additional information

RFC support

refer to the "Mobility Specification Sheet" for a list of RFCs and other industry standards supported by the MSM solution at

http://h17007.www1.hp.com/docs/mobility/4AA3-3883ENW.pdf

Warranty and support

Lifetime Warranty 2.0

advance hardware replacement for as long as you own the product with next-business-day delivery (available in most countries)

Electronic and telephone support

24x7 telephone support is available from HP for the first 3 years; limited electronic and business hours telephone support is

available from HP for the entire warranty period; to reach our support centers, refer to

www.hp.com/networking/contact-

support

;

for details on the duration of support provided with your product purchase, refer to

www.hp.com/networking/warrantysummary

Software releases

to find software for your product, refer to

www.hp.com/networking/support

; for details on the software releases available

with your product purchase, refer to

www.hp.com/networking/warrantysummary

†HP warranty includes repair or replacement of hardware for as long as you own the product, with next business day advance

replacement (available in most countries). The disk drive included with HP AllianceOne Advanced Services and Services zl Modules, HP

Threat Management Services zl Module, HP AllianceOne Extended zl Module with Riverbed Steelhead, HP MSM765 zl Mobility Controller

and HP Survivable Branch Communication zl Module powered by Microsoft® Lync has a five-year hardware warranty. For details, refer

to the Software license and hardware warranty statements at

www.hp.com/networking/warranty

QuickSpecs

HP 560 802.11ac Dual Radio Access Point Series

Overview

DA - 14918 Worldwide — Version 2 — April 29, 2014

Page 4

HP 560 Wireless Dual Radio 802.11ac (AM) Access Point (J9845A)

HP 560 Wireless Dual Radio 802.11ac (WW) Access Point (J9846A)

HP 560 Wireless Dual Radio 802.11ac (JP) Access Point (J9847A)

HP 560 Wireless Dual Radio 802.11ac (IL) Access Point (J9848A)

I/O ports and slots

1 RJ-45 autosensing 10/100/1000 port (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE

802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only

Additional ports and slots

1 RJ-45 serial console port

AP characteristics

Radios (built-in)

802.11b/g/n, a/n/ac

Radio operation modes

Client access, Local mesh, Packet capture

AP operation modes

Controlled

Wi-Fi Alliance Certification

a/b/g/n/ac Wi-Fi Certified

Antenna

(3) 5 dBi 2.4 GHz and (3) 7 dBi 5 GHz

Number of internal

antennas

Physical characteristics

Dimensions

8(w) x 6.75(d) x 2.62(h) in (20.32 x 17.15 x 6.65 cm)

Weight

2.25 lb (1.02 kg) mounting bracket

Memory and processor

Dual core @ 800 MHz, 128 MB flash, 256 MB

Mounting and enclosure

Indoor, plenum rated; Includes two ceiling mounting clips

Environment

Operating temperature

32°F to 122°F (0°C to 50°C)

Operating relative

humidity

5% to 95%, noncondensing

Non-operating/

Storage temperature

-40°F to 158°F (-40°C to 70°C)

Non-operating/

Storage relative humidity

5% to 95%, noncondensing

Altitude

up to 10,000 ft (3 km)

Electrical characteristics

Description

IEEE 802.3af/802.3at PoE compliant for Gigabit Ethernet

Maximum power rating

14 W

PoE power

13 W PoE+

Notes

With 802.3af PoE, the 2.4GHz radio will operate in 2x2:2 MIMO mode, <

12.9watts; With 802.3at PoE+, both radios will operate in 3x3:3 MIMO mode, <

14watts

Frequency band and

Operating channels

Americas

2.412 - 2.462 GHz (1 - 11 channels)

5.180 - 5.320 GHz (36 - 64 channels)

5.500 - 5.700 GHz (100 - 144 (excluding 5600-5670 MHz) channels)

5.745 - 5.825 GHz (149 - 165 channels)

European Union

2.412 - 2.472 GHz (1 - 13 channels)

5.180 - 5.320 GHz (36 - 64 channels)

5.500 - 5.700 GHz (100 - 140 (excluding 5600-5650 MHz) channels)

Rest of World (Actual

channels designated by

selecting country in UI)

2.412 - 2.472 GHz (1 - 13 channels)

5.180 - 5.320 GHz (36 - 64 channels)

5.500 - 5.700 GHz (100 - 144 channels)

5.745 - 5.825 GHz (149 - 165 channels)

QuickSpecs

HP 560 802.11ac Dual Radio Access Point Series

Technical Specifications

DA - 14918 Worldwide — Version 2 — April 29, 2014

Page 5

Taiwan

2.412 - 2.462 GHz (1 - 11 channels)

5.280 - 5.320 GHz (56 - 64 channels)

5.500 - 5.700 GHz (100 - 144 (excluding 5600-5670 MHz) channels)

5.745 - 5.825 GHz (149 - 165 channels)

Japan

2.412 - 2.472 GHz (1 - 13 channels)

5.180 - 5.320 GHz (36 - 64 channels)

5.500 - 5.700 GHz (100 - 140 channels)

Israel

2.412 - 2.472 GHz (1 - 13 channels)

5.180 - 5.320 GHz (36 - 64 channels)

Radio

FCC Part 15.247; FCC Part 15.407 (US); RSS-210 (Canada); EN 300 328; ARIB STD-T66; IDA Registration

(Singapore); RCR STD-33; ARIB STD-T71 (Japan); EN 301 893 (EU); KCC approval (Korea)

Safety

UL 2043; UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1

Medical

EN60601-1-2

RF Exposure

FCC Bulletin OET-65C; RSS-102; CFR 47, Part 2, Subpart J; ANSI/IEEE C95.1 (99); Ministry of Health Safety

Code 6; Australian Radiation Protection Std.

Features

Dual radio: IEEE 802.11a/n/ac for very high-throughput applications and IEEE 802.11b/g/n for legacy

support and high-speed applications

- Integrated antennas for both IEEE radios, supporting three spatial streams and 3x3 MIMO

- Six embedded antennas

- Both radios operate at full functionality with IEEE 802.3at PoE+ power

- The 2.4GHz 802.11b/g/n radio operates at 2x2:2 mode with 802.3af power, while the 5GHz 802.11ac

radio operates at full fuinctionality

Revise Series Specs (Web

only)

1 RJ-45 autosensing 10/100/1000 port

802.11b/g/n, a/n/ac

IEEE 802.11 a/b/g/n/ac

(3) 5 dBi 2.4 GHz and (3) 7 dBi 5 GHz

Emissions

55022 Class B; EN 301 489-1; EN 301 489-17; ICES-003 Class B; FCC Part 15, Class B

Notes

Supported data rates

• 802.11b: 1, 2, 5.5, 11 Mbps

• 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps

• 802.11n: 6.5 to 450 Mbps (MCS0 to MCS23, 1 to 3 spatial streams)

• 802.11ac: 6.5 Mbps to 1.3Gbps (MCS0 to MCS9, 1 to 3 spatial streams)

• 802.11n high-throughput (HT) 20/40

• 802.11ac very high throughput (VHT) 20/40/80

• 802.11n/ac packet aggregation A-MPDU and A-MSDU

The HP 560 access point power information listed includes the embedded antenna. The software will

automatically adjust the maximum power levels based on the country of

operation.

Three spatial stream AP, supporting 450 Mb/s on the 2.4GHz band and 1.3GHz on the 5GHz band.

Maximum transmit power varies by country.

Regulatory model number for the HP 560 Access Point - MRLBB-1304

• 802.11n Radio - MRLBB-1003

• 802.11ac Radio - MRLBB-1303

Services

Refer to the HP website at

www.hp.com/networking/services

for details on the service-level

descriptions and product numbers. For details about services and response times in your area, please

contact your local HP sales office.

QuickSpecs

HP 560 802.11ac Dual Radio Access Point Series

Technical Specifications

DA - 14918 Worldwide — Version 2 — April 29, 2014

Page 6

Radio characteristics

HP 560 Wireless Dual Radio 802.11ac (AM) Access Point (J9845A)

HP 560 Wireless Dual Radio 802.11ac (WW) Access Point (J9846A)

HP 560 Wireless Dual Radio 802.11ac (JP) Access Point (J9847A)

HP 560 Wireless Dual Radio 802.11ac (IL) Access Point (J9848A)

Note: This transmit power data is EIRP and includes the embedded antennas. The receiver sensitivity also includes the antenna gain.

IEEE 802.11ac 5GHz @

80MHz channel

Data rate

MCS9 - 1300

Mbps

MCS0 - 97.5

Mbps

Receiver sensitivity

-67 dBm -94 dBm

Transmit power

25 dBm 29 dBm

IEEE 802.11n 5GHz @

40MHz channel

Data rate

MCS23 - 450

Mbps

MCS16 - 45

Mbps

Receiver sensitivity

-77 dBm -97 dBm

Transmit power

27 dBm 29 dBm

IEEE 802.11n 5GHz @

20MHz channel

Data rate

MCS23 - 144

Mbps

MCS16 - 14.4

Mbps

Receiver sensitivity

-80 dBm

-100 dBm

Transmit power

27 dBm 29 dBm

IEEE 802.11n 2.4GHz @

40MHz channel

Data rate

MCS23 - 450

Mbps

MCS16 - 45

Mbps

Receiver sensitivity

-82 dBm -97 dBm

Transmit power

20 dBm 20 dBm

IEEE 802.11n 2.4GHz @

20MHz channel

Data rate

MCS23 - 144

Mbps

MCS16 - 14.4

Mbps

Receiver sensitivity

-84 dBm

-100 dBm

Transmit power

20 dBm 20 dBm

IEEE 802.11a 5GHz

Data rate

54 Mbps

6 Mbps

Receiver sensitivity

-83 dBm

-100 dBm

Transmit power

29 dBm 29 dBm

IEEE 802.11b/g 2.4 GHz

Data rate

54 Mbps 11 Mbps

6 Mbps 1 Mbps

Receiver sensitivity

-85 dBm -99 dBm -95 dBm

-100 dBm

Transmit power

20 dBm 20 dBm 20 dBm 26 dBm

QuickSpecs

HP 560 802.11ac Dual Radio Access Point Series

Technical Specifications

DA - 14918 Worldwide — Version 2 — April 29, 2014

Page 7

Standards and Protocols

(applies to all products in series)

Mobility

IEEE 802.11a High Speed Physical Layer in the 5 GHz Band

IEEE 802.11ac WLAN Enhancements for Very High Throughput

IEEE 802.11b Higher-Speed Physical Layer Extension in the 2.4 GHz Band

IEEE 802.11d Global Harmonization

IEEE 802.11g Further Higher Data Rate Extension in the 2.4 GHz Band

IEEE 802.11h Dynamic Frequency Selection

IEEE 802.11i Medium Access Control (MAC) Security Enhancements

IEEE 802.11n WLAN Enhancements for Higher Throughput

QuickSpecs

HP 560 802.11ac Dual Radio Access Point Series

Technical Specifications

DA - 14918 Worldwide — Version 2 — April 29, 2014

Page 8

HP 560 802.11ac Dual Radio Access Point Series accessories

Power Supply

HP 1-port Power Injector

J9407B

HP Single-Port 802.3at Gigabit PoE In-Line Power Supply

J9867A

To learn more, visit

www.hp.com/networking

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and

services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial

errors or omissions contained herein.

QuickSpecs

HP 560 802.11ac Dual Radio Access Point Series

Accessories

DA - 14918 Worldwide — Version 2 — April 29, 2014

Page 9

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HP Drahtloser Zugangspunkt Handbücher

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung