HPE ProLiant DL325 Gen10 Plus Bedienungsanleitung

HPE ProLiant DL325 Gen10 Plus v2 Server User GuideHPE ProLiant DL325 Gen10 Plus v2 Server User Guide

Part Number: 30-25EA2ED1-003

Published: March 2022

Edition: 3

HPE ProLiant DL325 Gen10 Plus v2 Server HPE ProLiant DL325 Gen10 Plus v2 Server User GuideUser Guide

AbstractAbstract

This document is for the person who installs, administers, and troubleshoots servers and storage systems. Hewlett Packard Enterprise

assumes you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy

levels, and are familiar with the weight and stability precautions for rack installations.

Part Number: 30-25EA2ED1-003

Published: March 2022

Edition: 3

NoticesNotices

The information contained herein is subject to change without notice. The only warranties for Hewlett Packard Enterprise products and

services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as

constituting an additional warranty. Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained

herein.

Confidential computer software. Valid license from Hewlett Packard Enterprise required for possession, use, or copying. Consistent with FAR

12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are

licensed to the U.S. Government under vendor's standard commercial license.

Links to third-party websites take you outside the Hewlett Packard Enterprise website. Hewlett Packard Enterprise has no control over and is

not responsible for information outside the Hewlett Packard Enterprise website.

AcknowledgmentsAcknowledgments

AMD is a trademark of Advanced Micro Devices, Inc.

Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.

Microsoft , Windows , and Windows Server are either registered trademarks or trademarks of Microsoft Corporation in the United States

and/or other countries.

VMware is a registered trademark or trademark of VMware, Inc. and its subsidiaries in the United States and other jurisdictions.

All third-party marks are property of their respective owners.

Revision historyRevision history

Part numberPart number Publication datePublication date EditionEdition Summary of changesSummary of changes

30-25EA2ED1-003 March 2022 3

® ® ®

Table of contentsTable of contents
Component identification
1 Front panel components
1.1 iLO Service Port
2 Front panel LEDs and buttons
2.1 Server UID LED
2.2 Using the UID button to view the Server Health Summary
2.3 Front panel LED power fault codes
3 Rear panel components
4 Rear panel LEDs
5 System board components
5.1 System maintenance switch descriptions
5.2 DIMM slot locations
5.3 DIMM label identification
5.4 Processor and socket components
6 Drive bay numbering
6.1 4 LFF drive bay numbering
6.2 8 SFF + 2 SFF drive bay numbering
7 HPE Basic Drive LED definitions
8 PCIe4 slot description
9 Riser board components
10 DSC-25 2-port SFP28 card ports and LEDs
11 HPE NS204i-p NVMe OS Boot Device components
12 HPE NS204i-p NVMe OS Boot Device LED definitions
13 Fan numbering
Operations
1 Remove the front bezel
2 Power up the server
3 Power down the server
4 Release the cable management arm
5 Remove the server from the rack
6 Remove the rack sliding rails
7 Remove the access panel
8 Remove the front drive cage
9 Remove the air baffle
10 Remove the riser cage
11 Remove a riser slot blank
12 Install the riser cage
13 Install the air baffle
14 Install the front drive cage
15 Install the access panel
16 Install the rack sliding rails
17 Install the server into the rack

Setup
1 Initial system installation
1.1 HPE Installation Service
1.2 Setting up the server
2 Operational requirements
2.1 Space and airflow requirements
2.2 Temperature requirements
2.3 Power requirements
2.4 Electrical grounding requirements
3 Rack warnings and cautions
4 Server warnings and cautions
5 Electrostatic discharge
Hardware options installation
1 Hardware option installation guidelines
2 Rack rail option
3 Cable management arm option
4 Installing the front bezel option
5 Power supply options
5.1 Hot-plug power supply calculations
5.2 Power supply warnings and cautions
5.3 DC power supply warnings and cautions
5.4 Installing an AC power supply
5.5 Installing a DC power supply
6 Transceiver option
6.1 Transceiver warnings and cautions
6.2 Installing a transceiver
7 Drive options
7.1 Drive installation guidelines
7.2 Installing a hot-plug SAS, SATA or NVMe drive
8 Installing the 2 SFF drive cage option
9 Optical drive option
9.1 Installing an optical drive in the LFF drive chassis
9.2 Installing an optical drive in the SFF drive chassis
10 Fan option
10.1 Fan population
10.2 Fan mode behavior
10.3 Installing the high-performance fans
11 Memory options
11.1 DIMM population information
11.2 HPE SmartMemory speed information
11.3 Installing a DIMM
12 Secondary riser cage options
12.1 Installing the secondary riser option for half-height expansion cards
12.2 Installing the secondary riser option for full-height expansion cards

13 Storage controller options
13.1 Preparing the server for storage controller installation
13.2 Installing a type-a modular controller option
13.3 Installing a type-p PCIe plug-in controller option
14 Energy pack options
14.1 HPE Smart Storage Battery
14.2 Energy pack specifications
14.3 Installing an energy pack
15 Expansion card options
15.1 Installing an expansion card
16 M.2 SSD options
16.1 Installing the M.2 SATA SSD enablement option
16.2 HPE NS204i-p NVMe OS Boot Device option
16.2.1 Installing the HPE NS204i-p NVMe OS Boot Device option
17 OCP NIC 3.0 adapter option
17.1 Installing an OCP NIC 3.0 adapter
18 Chassis intrusion detection switch option
18.1 Installing the chassis intrusion detection switch
19 Serial port option
19.1 Installing the serial port option
20 Internal USB device option
20.1 Installing an internal USB device
21 HPE Trusted Platform Module 2.0 Gen10 Plus option
21.1 HPE Trusted Platform Module 2.0 guidelines
21.2 Installing the Trusted Platform Module board
21.2.1 Preparing the server for installation
21.2.2 Installing the TPM board and cover
21.2.3 Preparing the server for operation
21.3 Enabling the Trusted Platform Module
21.3.1 Enabling the Trusted Platform Module as TPM 2.0
21.3.2 Enabling the Trusted Platform Module as TPM 1.2
21.4 Retaining the BitLocker recovery key/password
Cabling
1 Cabling guidelines
2 Internal cabling management
3 Storage cabling
3.1 Drive power cabling
3.2 Storage controller cabling
3.2.1 4 LFF SAS/SATA drive controller cabling
3.2.2 8 SFF SAS/SATA drive controller cabling
3.2.3 8 SFF NVMe drive controller cabling
3.2.4 2 SFF NVMe drive controller cabling
3.2.5 8 + 2 SFF drive controller cabling
3.3 Energy pack cabling

3.4 Storage controller backup power cabling
4 Optical drive cabling
5 M.2 SATA SSD add-in card cabling
6 Fan cabling
7 OCP bandwidth upgrade cabling
8 Serial port cabling
9 Chassis intrusion detection switch cabling
10 Front I/O cabling
Configuration and diagnostic utilities
Troubleshooting
1 NMI functionality
2 Troubleshooting resources
System battery replacement
1 System battery information
2 Removing and replacing the system battery
Safety, warranty, and regulatory information
1 Regulatory information
1.1 Notices for Eurasian Economic Union
1.2 Turkey RoHS material content declaration
1.3 Ukraine RoHS material content declaration
2 Warranty information
Specifications
1 Environmental specifications
2 Mechanical specifications
3 Power supply specifications
3.1 HPE 500 W Flex Slot Platinum Hot-plug Low Halogen Power Supply (94% efficiency)
3.2 HPE 800 W Flex Slot Platinum Hot-plug Low Halogen Power Supply
3.3 HPE 800 W Flex Slot Titanium Hot-plug Low Halogen Power Supply
3.4 HPE 800 W Flex Slot Universal Hot-plug Low Halogen Power Supply
3.5 HPE 800 W Flex Slot -48 VDC Hot-plug Low Halogen Power Supply
3.6 HPE 1600 W Flex Slot Platinum Hot-plug Low Halogen Power Supply
Websites
Support and other resources
1 Accessing Hewlett Packard Enterprise Support
2 Accessing updates
3 Customer self repair
4 Remote support
5 Documentation feedback

Component identificationComponent identification

This chapter describes the external and internal server features and components.

Component identification 7

Front panel componentsFront panel components

LFF front panel componentsLFF front panel components

ItemItem DescriptionDescription

1 Optical drive (optional)

2 Serial number/iLO information pull tab

3 iLO service port

4 USB 3.0 port

5 LFF drive bays

The serial number/iLO information pull tab is double-sided. One side shows the server serial number and the customer asset tag

label. The other side shows the default iLO account information.

The server supports LFF SAS and SATA drives.

SFF front panel componentsSFF front panel components

ItemItem DescriptionDescription

1 Serial number/iLO information pull tab

2 Optical drive (optional)

3 2 SFF drive cage

4 Universal media bay

5 USB 3.0 port

6 iLO service port

7 SFF drive bays

The serial number/iLO information pull tab is double-sided. One side shows the server serial number and the customer asset tag

Front panel components 8

label. The other side shows the default iLO account information.

The server supports two 2 SFF drive cage options. The following drive types are supported: SATA, SAS, U.2 NVMe, and U.3 NVMe

drives.

The universal media bay supports the optical drive or the 2 SFF drive cage option.

The 8 SFF drive cage supports the following drive types: SATA, SAS, U.2 NVMe, and U.3 NVMe drives.

Front panel components 9

iLOiLO Service Port Service Port

The Service Port is a USB port with the label iLOiLO on supported servers and compute modules.

To find out if your server or compute module supports this feature, see the server specifications document at the following website:

https://www.hpe.com/info/qshttps://www.hpe.com/info/qs.

When you have physical access to a server, you can use the Service Port to do the following:

Download the Active Health System Log to a supported USB flash drive.

When you use this feature, the connected USB flash drive is not accessible by the host operating system.

Connect a client (such as a laptop) with a supported USB to Ethernet adapter to access the following:

iLO web interface

Remote console

iLO RESTful API

CLI

Hewlett Packard Enterprise recommends the HPE USB to Ethernet Adapter (part number Q7Y55A).

When you use the iLO Service Port:

Actions are logged in the iLO event log.

The server UID flashes to indicate the Service Port status.

You can also retrieve the Service Port status by using a REST client and the iLO RESTful API.

You cannot use the Service Port to boot any device within the server, or the server itself.

You cannot access the server by connecting to the Service Port.

You cannot access the connected device from the server.

For more information about the iLO Service Port, see the iLO user guide at the following website: https://www.hpe.com/support/ilo-https://www.hpe.com/support/ilo-

docsdocs.

iLO Service Port 10