HSM Profipack 400 Bedienungsanleitung
OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS
4. Safety instructions
• Read all instructions before start-up of the device and save these instructions
for later use.
• Follow all warnings and instructions marked on the product.
• Make sure no liquid is spilled on or in the device.
• Keep product out of the reach of children.
• The device should be operated only with an operator in attendance.
• You are not allowed to carry out repairs on your own.
• If there is damage or the device is not functioning properly, switch it off, pull out
the plug and call customer service.
Risk of injury!
Never reach into the slit of the feed opening.
Risk of injury by pulling in!
Keep long hair, loose articles of clothing, ties, scarves, jewelry
etc. away from feed opening. Material with the tendency to
form loops, e.g. tapes, strapping material, etc. must not be
processed.
Before changing the location, cleaning or anything else other
than normal
operation
turn off and unplug the device!
Maintenance and service work may be performed only by:
• customer service
• specially trained staff (e.g. qualified electricians)
• service technicians from our contracting partners
5. Installation
• The device must not be set up near a heating element or another source of
warmth.
• Take care that the main plug can be reached easily.
• Before plugging in the main plug, check that the the voltage and frequency of
your main supply are in accordance with the specifications on the type plate.
6. Cleaning
• Switch the device off and unplug it.
• Cleaning must only be performed with a soft fabric and a mild soapwater
solution. The use of abrasive material, petrol or thinner is forbidden.
7. Operation
Switching on
• Press rocker switch pos. 1.
• Cutting unit starts.
Feeding cardboard boxes
1
• Cardboard boxes are processed up to a width of 16.33”.
• Wider cardboard is automatically cut.
Switching off
Tap rocker switch pos. 2.
• Rocker switch resets to zero position, cutting unit stops.
8. Fault elimination
To remove material when there`s a fault, press and hold down
rocker switch pos. 2.
• Cutting unit moves backwards.
If there`s a fault, before notifying customer service, please check:
• Is the main plug inserted?
•Is the device switched on?
• Is the motor overloaded? Allow motor to cool down for approx. 15–20 min.
2
2
16.33”
https://www.supplychimp.com
OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS
4. Safety instructions
• Read all instructions before start-up of the device and save these instructions
for later use.
• Follow all warnings and instructions marked on the product.
• Make sure no liquid is spilled on or in the device.
• Keep product out of the reach of children.
• The device should be operated only with an operator in attendance.
• You are not allowed to carry out repairs on your own.
•If there is damage or the device is not functioning properly, switch it off, pull out
the plug and call customer service.
Risk of injury!
Never reach into the slit of the feed opening.
Risk of injury by pulling in!
Keep long hair, loose articles of clothing, ties, scarves, jewelry
etc. away from feed opening. Material with the tendency to
form loops, e.g. tapes, strapping material, etc. must not be
processed.
Before changing the location, cleaning or anything else other
than normal
operation
turn off and unplug the device!
Maintenance and service work may be performed only by:
• customer service
• specially trained staff (e.g. qualified electricians)
• service technicians from our contracting partners
5. Installation
• The device must not be set up near a heating element or another source of
warmth.
• Take care that the main plug can be reached easily.
• Before plugging in the main plug, check that the the voltage and frequency of
your main supply are in accordance with the specifications on the type plate.
6. Cleaning
• Switch the device off and unplug it.
•Cleaning must only be performed with a soft fabric and a mild soapwater
solution. The use of abrasive material, petrol or thinner is forbidden.
7. Operation
Switching on
• Press rocker switch pos. 1.
• Cutting unit starts.
Feeding cardboard boxes
1
• Cardboard boxes are processed up to a width of 16.33”.
• Wider cardboard is automatically cut.
Switching off
Tap rocker switch pos. 2.
• Rocker switch resets to zero position, cutting unit stops.
8. Fault elimination
To remove material when there`s a fault, press and hold down
rocker switch pos. 2.
• Cutting unit moves backwards.
If there`s a fault, before notifying customer service, please check:
• Is the main plug inserted?
• Is the device switched on?
•Is the motor overloaded? Allow motor to cool down for approx. 15–20 min.
2
2
16.33”
https://www.supplychimp.com
Andere HSM Aktenvernichter Handbücher
HSM
HSM SECURIO P 44C Bedienungsanleitung
HSM
HSM Pure 630c Bedienungsanleitung
HSM
HSM 412.2 Bedienungsanleitung
HSM
HSM SECURIO AF300L5 Bedienungsanleitung
HSM
HSM Classic 108.2 Bedienungsanleitung
HSM
HSM HSM 411.2 Bedienungsanleitung
HSM
HSM HSM1782 Bedienungsanleitung
HSM
HSM HSM1872 Bedienungsanleitung
HSM
HSM HSM1871 Bedienungsanleitung
HSM
HSM Securio P40is Bedienungsanleitung
HSM
HSM Securio B22 Bedienungsanleitung
HSM
HSM Pure 320 Bedienungsanleitung
HSM
HSM Securio P40 Bedienungsanleitung
HSM
HSM securio C18 Bedienungsanleitung
HSM
HSM shredstar S10 Bedienungsanleitung
HSM
HSM shredstar X13 Bedienungsanleitung
HSM
HSM Powerline 450.2 Bedienungsanleitung
HSM
HSM Powerline HDS 150 Bedienungsanleitung
HSM
HSM 386.2 Bedienungsanleitung
HSM
HSM Pure 220 Bedienungsanleitung
Beliebte Aktenvernichter Handbücher anderer Marken
Swingline
Swingline STACK-AND-SHRED200X&200XL 60X Bedienungsanleitung
GBC
GBC ShredMaster CC055 Bedienungsanleitung
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Bedienungsanleitung
UNITED OFFICE
UNITED OFFICE UAV 190 A1 Bedienungsanleitung
Rexel
Rexel Optimum AutoFeed+ 45X Bedienungsanleitung
Martin Yale
Martin Yale 227284S1 Bedienungsanleitung
