HSM Securio P36 Bedienungsanleitung

BETRIEBSANLEITUNG

AKTENVERNICHTER

OPERATING INSTRUCTIONS

PAPER SHREDDER

NOTICE D‘UTILISATION

DESTRUCTEUR DE DOCUMENTS

MANUALE OPERATIVO

DISTRUGGIDOCUMENTI

INSTRUCCIONES DE SERVICIO

DESTRUCTORA DE DOCUMENTOS

INSTRUÇÕES DE OPERAÇÃO

DESTRUIDORA DE DOCUMENTOS

GEBRUIKSAANWIJZING

PAPIERVERNIETIGER

BRUGSVEJLEDNING

MAKULERINGSMASKINE

BRUKSANVISNING

DOKUMENTFÖRSTÖRARE

KÄYTTÖOHJE

PAPERINSILPPURI

BRUKSANVISNING

MAKULERINGSMASKIN

1.850.998.100 E – 05/2012

P 36

2 SECURIO P 36 05/2012

deutsch: Aktenvernichter SECURIO P36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

english: Paper shredder SECURIO P36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

français: Destructeur de documents SECURIO P36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

italiano: Distruggidocumenti SECURIO P36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

español: Destructora de documentos SECURIO P36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

português: Destruidora de documentos SECURIO P36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

nederlands: Papiervernietiger SECURIO P36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

dansk: Makuleringsmaskine SECURIO P36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

svenska: Dokumentförstörare SECURIO P36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

suomi: Paperinsilppuri SECURIO P36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

norsk: Makuleringsmaskin SECURIO P36 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

05/2012 SECURIO P 36 11

english

1 Proper use, warranty

The shredder is designed for destroying paper.

Depending on the cutting type, it can also han-

dle small quantities of the following materials:

Its sturdy drive mechanism is not damaged by

paper clips and staples. Only on machines with

safety level HS Level 6 (1 x 5 mm) can the pa-

per not contain staples or paper clips.

The warranty period for the document shredder

is 2 years. There is a special warranty for the

HSM solid steel cutting rollers in the document

shredder, which is provided independently of

the guarantee, and remains valid for the entire

service life of the machine (HSM Lifetime War-

ranty). Exceptions to this are document shred-

ders with security levels 5 and HS level 6. This

warranty and guarantee exclude wear and dam-

age caused by improper handling or actions

taken by third parties.

Check the name plate on the back of the ma-

chine to ﬁnd out the cutting width and mains

voltage for your document shredder and ob-

serve the applicable instructions in the operat-

ing manual.

2 Safety instructions

Classiﬁcation

Safety notice Explanation

WARNING Failure to observe this

warning can lead to

serious or fatal injury.

Notice Failure to observe this

instruction can cause

damage.

Before using the machine for the ﬁrst

time, read the operating manual, and

keep it for later use and to pass on to

any subsequent users. Observe all

safety instructions on to the machine.

WARNING

Dangerous for children and others!

The machine may not be used by

persons (including children under

14 years of age) with limited physi-

cal, sensory or mental capabilities or

with a lack of experience and knowl-

edge, unless they are supervised by

a responsible person or are instructed by them

on the use of the machine. Children must be

supervised to ensure they do not play with the

machine. Do not leave the document shredder

switched on when it is unattended.

Shred width (mm) 3.9 5.8 1.9x15 4.5x30

Credit cards ●● ● ●

CDs ●● ●

Floppy discs ●●

Note: You can also shred CDs, diskettes and

credit cards in the separate CD cutting unit (op-

tional) without using the paper cutting unit.

12 SECURIO P 36 05/2012

english

WARNING

Dangerous mains voltage!

Improper handling of the machine can

lead to an electric shock.

– Before you insert the power plug, make sure

that the voltage and frequency of your power

supply comply with the information on the

name plate.

– Make sure that the power plug is easily ac-

cessible.

– Make sure that no water gets into the shred-

der. Do not immerse the power cable or the

power plug in water.

– Never touch the power plug with wet hands.

– Never pull the plug out of the socket using

the power cable. Always pull out the plug

directly.

– Only use the machine in a dry room indoors.

Never operate the machine in damp rooms

or in the rain.

Check the machine and cable regu-

larly for damage. Switch the shred-

der off if it is damaged or not work-

ing correctly or before relocating or

cleaning it and disconnect it from

the mains.

– Keep the machine, the plug and cable away

from open ﬁre and hot surfaces. The ventila-

tion slots must not be blocked or covered

and there must be at least 5 cm space be-

tween the shredder and any wall or furniture.

Service work may only be carried

out by HSM Customer Service or by

the service technicians of our con-

tractual partners.

See page 92 for our customer ser-

vice addresses.

Notice Danger from improper use

Only operate this machine in accordance with

the instructions outlined in “Proper use”.

WARNING

Risk of injury!

Do not reach into the paper feed slot.

Risk of injury from being pulled in!

Keep long hair, loose articles of cloth-

ing, ties, scarves, jewellery, etc. away

from feed opening. Material with the

tendency to form loops, e.g. tapes,

strapping material, etc. must not be

shredded.

Beware of injury when using the CD splitter

Wear goggles when destroying CDs in ma-

chines without a separate CD cutting unit.

3 Commissioning

Before starting up the machine for the ﬁrst time,

open the door and remove the three wing nuts

of the transport locks from the base plate under

the cutting unit.

05/2012 SECURIO P 36 13

english

4 Machine components

Note: Depending on the version, your machine may not include all the assemblies.

1 2 3 4 5 6 7

1 Feed slot for CDs, ﬂoppy discs and credit

cards (optional)

2 Safety instructions

3 Light barrier in the paper feed

4 Safety element

5 Operating and display unit

6 Holder for operating manual and oil bottle

7 Shredded material for CDs, ﬂoppy discs

and credit cards (optional)

8 Filler opening for cutting apparatus oil

(cross cut only)

Indicator: oil reservoir empty

Function button

“On/off/start”

Indicator: metal detection

Indicator: button lock

Indicator: ready for operation /

Sleep down

Indicator: door open

or safety element not latched

Indicator: overload

(paper jam)

Indicator: paper/CD

container full

Operating and display elements

Note: depending on the machine version,

not all functions may be available.

R button:

• Cutting unit runs in reverse

• Error acknowledgement

• Software version display (for

service technicians only)

14 SECURIO P 36 05/2012

english

5 Operation

WARNING

Before switching the machine on,

make sure that you observe all safety

instructions.

Switching on the shredder

• Only US-version:

Set mains switch at rear of

paper shredder to „I“.

• Check that no paper is in the paper feed slit.

• Press the on/off button.

The “Ready for operation” indicator lights up.

Shredding paper

• Feed the paper to the middle of the paper

slot. The light barrier starts the cutting unit

automatically. Therefore, with thin paper

strips, make sure the light barrier detects

them.

Note: Do not shred paper in the CD cutting

unit. This can cause damage.

3 seconds after the light barrier in the paper

feed opening is free again, the cutting unit is

switched off automatically and the shredder

switches to standby.

Destroying CDs, credit cards and ﬂoppy

disks

• Check whether your machine is certiﬁed

for destroying these materials (see “Proper

use”).

• For machines with a separate CD cutting unit

(optional), put the material in the feed slot of

this cutting unit. This protects you from splin-

ters. Otherwise, use the paper cutting unit.

Switching off the shredder

• Press the on/off button.

The “Ready for operation” indicator goes out.

• Only US-version: Set mains switch at rear

of paper shredder to „0“.

Other function modes:

• Permanent mode

Application: Destroying large quantities of

CDs and paper

Function: Cutting unit runs continuously.

If no material is fed in within a period of

3 minutes, the cutting unit shuts down and

the shredder switches to standby.

Start: Press the on/off button for at least

4 seconds.

To cancel: Press the on/off button.

• Sleep mode

Function: Two minutes after the last paper

feed operation, all consumers that are not

required are switched off automatically.

The “Ready for operation” indicator goes out

brieﬂy at regular intervals.

The shredder starts automatically when pa-

per is fed in.

• Automatic shutdown

Function: If the shredder is not used for one

hour, it shuts down completely and therefore

does not consume any more electricity (at

night, at the weekend).

Restart: Press the on/off button.

05/2012 SECURIO P 36 15

english

Fault and function indicators

Display Problem Measure

Continu-

ous lamp

Flashing

light

Paper jam

Overload You have fed in too much paper.

The cutting unit runs in reverse for a few seconds and pushes the paper

back out again.

• If necessary, press the reverse button “R” to remove the stack of paper.

• Take half the stack of paper.

• Feed the paper in portions.

Note:

You can lift up the safety element in order to better remove paper. To do

this, press the middle section of the front of the safety element and lift up

the ﬂap.

Note:

This indicator lamp also lights up when the motor is overloaded. In this

case, let the shredder cool down for 20 minutes before using it again.

Paper and

CD fed at

the same

time

• Do not use both cutting units at the same time, but rather shred paper and

CDs/diskettes/credit cards separately.

Press safety

element • The LED also ﬂashes if you press the safety element or open the door while

there is a paper jam.

Continu-

ous lamp

Flashing

light

Paper/

shredded

material

container

full

• Empty the paper/shredded material container.

Note:

If you press the reverse button brieﬂy before opening the door, part of the

material is pulled back into the cutting apparatus.

CD contain-

er full • Empty the CD container. To do so, lift it upwards out of the bracket.

Door is

open or

safety

element not

latched

• Close the door or latch in the safety element.

Note:

Movement of the safety element was detected during the shredding proce-

dure. If your machine switches off without signalling an error, pull the paper

out of the paper slit and feed it back in again.

Metal detec-

tion • Press the reverse button and pull the paper put of the feed slot.

• Remove any metal which is in the paper or on the safety element.

• Acknowledge the error by pressing the R button.

16 SECURIO P 36 05/2012

english

Problem

Cutting unit runs con-

tinuously even though

the machine is not in the

permanent mode.

The light barrier is soiled with paper dust.

• Clean the light barrier in the paper feed using a dry brush or cloth.

Display Indicator

Several indicators are lit The R button was pressed for more than 20 s.: Software version display (for

service technicians only)

Display Problem Measure

Oil reservoir

empty • Fill the reservoir with cutting apparatus oil.

Only use HSM special oil.

Reservoir volume: 250 ml

Press the safety element and lift up the ﬂap.

The oil ﬁlling opening is to the right of the feed chute.

You can ﬁll the oil either through the small opening

1(take out the yellow plug) or the normal opening 2

(unscrew the red cap).

Display Function Activate/deactivate

Button lock

is activated To activate or deactivate the button lock

• Press and hold the reverse button

• Press the on/off button

• Release the on/off button and then the R button

Manual reversing

If you press the reverse button, the cutting unit

runs in reverse and switches off after 2 sec-

onds, even if you keep the button pressed. To

reverse manually, release the button and press

it again.

If the shredder is already running forward,

pressing the button immediately reverses it.

Shredded material container

Both cutting units stop when the paper or CD

container is full.

On machines with a separate CD cutting unit,

the level in the CD container (see overview,

item 7) is monitored. Empty the container after

there is a signal on the operating and indicator

element.

Notes Automatic oiler (cross cut only)

The cutting units are oiled for 1.5 seconds after:

• The cutting unit is in operation for 200 sec-

onds (corresponding to 50 paper shreds)

• The cutting unit runs forwards after the re-

verse button has been pressed

The “Oil reservoir empty” signal is automati-

cally deactivated after the reservoir is ﬁlled. The

shredder remains operational even when the oil

reservoir is empty.

Metal detection (optional)

The document shredder can be optionally

equipped with a metal detector. The automatic

switch-off allows damage to the cutting unit by

paper clips or other metal objects to be avoided.

Safety element monitoring

Movement of the safety element was detected

during the shredding procedure. If your ma-

chine switches off without signalling an error,

pull the paper out of the paper slit and feed it

back in again.

05/2012 SECURIO P 36 17

english

7 Disposal / Recycling

Electrical and electronic old devices

contain a variety of valuable materi-

als, but also hazardous substances

which were required for function and

safety. Incorrect disposal or handling

can be dangerous to your health and

the environment. Never dispose of old devices

in the household waste. Observe the current

applicable regulations and use the collection

points for returning and recycling electric and

electronic devices. Dispose of all the packaging

materials also in an environmentally-responsi-

ble way.

6 Cleaning and maintenance

WARNING

Dangerous mains voltage!

Switch off the shredder and pull out

the mains plug.

When cleaning only use a soft cloth and a mild

soap-water solution. However, no water must

enter the equipment.

Check that the door switch is working

properly: WARNING

If the following procedure cannot be

performed, switch off the document

shredder, disconnect the mains plug

and contact customer service.

• Insert the mains plug and switch on the

shredder.

• Feed in a sheet of paper and open the front

door while the paper is being drawn in.

The cutting unit must turn off immediately

and the “door open” indicator must light up.

• Close the door.

The cutting unit must not yet restart.

• Pull the paper out of the feed opening. The

light barrier must be clear.

• Switch off the machine and then switch back

on.

The cutting unit starts when paper is fed in.

Strip cut only:

Oil the cutting unit when

cutting performance de-

creases or the device be-

comes noisy, or every time

you empty the waste con-

tainer.

Only use HSM special

lubricating oil for the cutting

unit to do this:

• Spray special cutting apparatus oil through

the paper feed opening along the entire width

on to the cutting rollers.

• Let the cutting unit run in the permanent

mode for about 10 seconds without any pa-

per.

 Paper dust and particles are shaken off.

8 Scope of delivery

• Paper shredder, ready for connection, in car-

ton packing, carton on pallet, tied with strap-

ping tape

• 5 bags for shredded material

• Special cutting block oil (cross cut)

• Operating instructions

Accessories

• 10 bags for shredded material,

order No.: 1.442.995.110

• Special cutting block oil 250 ml,

order No.: 1.235.997.403

See page 92 for our customer service address-

es.

18 SECURIO P 36 05/2012

english

9 Technical data

* HSM-speciﬁcation

Cutting type Strip cut Cross cut

Cut size (mm) 5.8 3.9 4.5 x 30 1.9 x 15 0.78 x 11 1 x 5

Security level DIN 32757 - 1 2 2 3 4 5 Level 6*

Cutting capacity** (sheets), A4 70 g/m2

80 g/m247 - 49

39 - 41 37 - 39

31 - 33 29 - 31

25 - 27 18 - 20

15 - 17 11 - 12

9 - 10 9

Weight 64 kg 68 kg

Cutting speed 90 mm/s 100 mm/s

Intake width 330 mm

Power supply 230 V, 50 Hz

Power consumption with max. number of sheets 1.800 W

Operating mode Continuous operation

Ambient conditions in operation:

Temperature

Relative humidity

Height above sea-level (MSL)

-10°C to +25°C

max. 90%, without condensation

max. 2,000 m

Dimensions W x D x H (mm) 580 x 550 x 936

Volume of the shredded paper container 145 l

Sound pressure level emissions

(Idle running/ load) 58 - 59 dB(A) / 60 - 61 dB(A)

Cutting size of the separate CD cutting

unit (optional) Order number +C, E *** Order number +M, N ***

3.9 x 40 mm 2.2 x 2.0 mm

*** Identiﬁed by the letter after the 7-digit order number on the name plate on the back of the machine.

e.g. 1873111C >> cutting size 3.9 x 40 mm

** The maximum number of sheets (DINA4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The

performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage

or a different mains frequency to the one speciﬁed could result in less sheet capacity and increased noise during op-

eration. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.

The performance data in 80 g/m² is calculated.

Andere Handbücher für securio P36

Inhaltsverzeichnis

Andere HSM Aktenvernichter Handbücher

HSM

HSM shredstar Bedienungsanleitung

HSM

HSM Powerline 450.2 Bedienungsanleitung

HSM

HSM FA 490.1 Bedienungsanleitung

HSM

HSM classic 70.2 Bedienungsanleitung

HSM

HSM Securio B35 Bedienungsanleitung

HSM

HSM Primo 4001 Bedienungsanleitung

HSM

HSM HSM1781 Bedienungsanleitung

HSM

HSM Pure 740 Bedienungsanleitung

HSM

HSM shredstar x10 Bedienungsanleitung

HSM

HSM classic 390.3 Bedienungsanleitung

HSM

HSM Securio AF300 Bedienungsanleitung

HSM

HSM SECURIO B22s Bedienungsanleitung

HSM

HSM 105.2HS-L5 Bedienungsanleitung

HSM

HSM HSM FA 500.2 Bedienungsanleitung

HSM

HSM Securio B35s Bedienungsanleitung

HSM

HSM Securio B32 Bedienungsanleitung

HSM

HSM 125.2 Bedienungsanleitung

HSM

HSM 412.2 Bedienungsanleitung

HSM

HSM Classic 225.2 Bedienungsanleitung

HSM

HSM powerline hds 230 Bedienungsanleitung

HSM

HSM Securio B24 Bedienungsanleitung

HSM

HSM SP 5080 Bedienungsanleitung

HSM

HSM Shredstar Multishred one-4 all Bedienungsanleitung

HSM

HSM SECURIO P44i Bedienungsanleitung

Beliebte Aktenvernichter Handbücher anderer Marken

Swingline

Swingline STACK-AND-SHRED200X&200XL 60X Bedienungsanleitung

GBC

GBC ShredMaster CC055 Bedienungsanleitung

UNITED OFFICE

UNITED OFFICE UAV 190 A1 Bedienungsanleitung

Rexel

Rexel Optimum AutoFeed+ 45X Bedienungsanleitung

Martin Yale

Martin Yale 227284S1 Bedienungsanleitung

Bonsaii

Bonsaii DocShred C223-A Bedienungsanleitung

TRU RED

TRU RED TR-BMC20A Bedienungsanleitung

Fellowes

Fellowes 50S Bedienungsanleitung

GBC

GBC SHREDMASTER 1236SE Bedienungsanleitung

Gude

Gude GH 2600 P Bedienungsanleitung

Ativa

Ativa DQ80M Bedienungsanleitung

Q-Connect

Q-Connect Q8CC Bedienungsanleitung

Fellowes

Fellowes POWERSHRED C-325CI Bedienungsanleitung

Olivetti

Olivetti Privacy 5000C Kurzanleitung

Dahle

Dahle paperSAFE 22022 Bedienungsanleitung

Formax

Formax OnSite FD 87 Bedienungsanleitung

GEHA

GEHA Home & Office S7 CD Bedienungsanleitung

Fellowes

Fellowes Powershred M-3C Bedienungsanleitung

HSM securio P36 Bedienungsanleitung

Beliebte Aktenvernichter Handbücher anderer Marken