HTC 2PS6400 Installations- und Betriebsanleitung

Safety and

regulatory guide

2 Safety and regulatory guide

Please read before proceeding

THE BATTERY IS NOT FULLY CHARGED WHEN YOU TAKE THE

DEVICE OUT OF THE BOX.

Privacy restrictions

Some countries require full disclosure of recorded telephone

conversations.

Important health information and safety

precautions

READ THE FOLLOWING WARNINGS AND INFORMATION

BEFORE USE OF THE PRODUCT AND FOLLOW ALL PRODUCT

SAFETY AND OPERATING INSTRUCTIONS. FAILURE TO DO SO

MAY CAUSE BODILY INJURY, ELECTRIC SHOCK, FIRE, AND

OTHER DAMAGE.

Electrical safety



Do not attempt to disassemble the phone or its accessory. Only

qualified personnel must service or repair the phone or its

accessories.



Do not connect with incompatible products or accessories.



Do not touch the SIM card’s metal connectors as this may cause

an electrostatic discharge.

CAUTION

: Connecting to improperly grounded equipment can

result in an electric shock to your device.

This product is equipped with a USB Cable for connecting with

desktop or notebook computer. Be sure your computer is properly

grounded (earthed) before connecting this product to the

computer. The power supply cord of a desktop or notebook

computer has an equipment-grounding conductor and a

grounding plug. The plug must be plugged into an appropriate

outlet which is properly installed and grounded in accordance with

all local codes and ordinances.

Safety precautions for power supply unit



Use the correct external power source

A product should be operated only from the type of power

source indicated on the electrical ratings label.

NOTE:

This product is intended for use with a certified Class 2

Limited Power Source, rated 5 Volts DC, maximum 2.5 Amp and

rated 9 Volts DC, maximum 1.7 Amp power supply unit.

This product should be charged only with the following power

Safety and regulatory guide 3

supply.

AC adapter:

HTC, TC P5000-US

Your device should only be operated with the HTC qualified

battery pack, model number

B2PS6100

. Operating temperature

range: 32 °F to 104 °F (0 °C to 40 °C)



Handle battery packs carefully

This product contains a Lithium-ion polymer or Lithium-ion battery.

There is a risk of fire and burns if the battery pack is handled

improperly.

WARNING

: To reduce risk of fire or burns, do not

disassemble, crush, puncture, short external

contacts or circuits, expose to temperature above

40 °C (104 °F), or dispose of in fire or water.



Additional precautions



Keep the device dry and away from water or any liquid as it

may cause a short circuit.



The phone should only be connected to products that bear

the USB-IF logo or have completed the USB-IF compliance

program.



Only use the battery with a charging system that has been

qualified with the system per this standard, IEEE-Std-1725.

Use of an unqualified battery or charger may present a risk of

fire, explosion, leakage or other hazard.



Avoid dropping the phone. If the phone or battery is dropped,

especially on a hard surface, and the user suspects damage,

take it to a service centre for inspection.



If the battery leaks:



Do not allow the leaking fluid to come in contact with skin or

clothing. If already in contact, flush the affected area

immediately with clean water and seek medical advice.



Do not allow the leaking fluid to come in contact with eyes. If

already in contact, DO NOT rub; rinse with clean water

immediately and seek medical advice.



Take extra precautions to keep a leaking battery away from

fire as there is a danger of ignition or explosion.

4 Safety and regulatory guide

Safety precautions related to weather, temperature and

moisture

Keep this product away from water, excessive moisture and

extreme temperatures. Avoid hot areas. The product should be

kept away from heat sources such as radiators, heat registers,

stoves, or other products that produce heat. Do not leave the

product inside a vehicle or in places where the temperature may

exceed 40 °C (104 °F), such as on a car dashboard, window sill, or

behind glass that is exposed to direct sunlight or strong ultraviolet

light for extended periods of time. This may damage the product,

overheat the battery, or pose a risk to the vehicle.

Avoid wet areas. Never use the product in rain, or near washbasins

or other wet or high humidity locations, such as locations where

the device may be exposed to sweat or other liquids. If your

product gets wet, do not try to dry the product with the use of an

oven, dryer or microwave, as this may damage your product.

Avoid using your device after a dramatic change in temperature

and/or humidity ranges, as condensation may form on or within

the device. To avoid damaging the device, allow sufficient time for

the moisture to evaporate before use.

Do not use your phone if it has been damaged.

Prevention of hearing loss

CAUTION

: Permanent hearing loss may occur if

earphones or headphones are used at high volume for

prolonged periods of time.

Turn down the device volume before using headphones

or other audio devices.

Using your phone while flying

Use of cell phones may be restricted on aircraft. For your safety

and the safety of other passengers, always follow crew

instructions regarding the use of your phone.

Environmental hazards

When in any area with a potentially explosive atmosphere or

where flammable materials exist, the product should be turned off

and the user should obey all signs and instructions.

Road safety

When behind the wheel, driving safely should always be your first

priority. According to the National Highway Traffic Safety

Administration (NHTSA), scientific research indicates that using a

Safety and regulatory guide 5

wireless phone while driving degrades a driver’s performance,

whether used in a hands-free or hand-held mode. NHTSA advises

that the “safest course of action is to refrain from using a cell

phone while driving.” NHTSA’s policy on “Cell Phone Use While

Driving,” as well as Frequently Asked Questions on the subject, are

available at www.nhtsa.gov. For your safety and the safety of

those around you, please consider turning your phone off while

you are driving.

If you choose to use your phone while driving, be aware that some

state and local governments have adopted laws governing the use

of wireless devices while driving. It is your responsibility to know

and comply with the laws in your area.

General precautions

You alone are responsible for how you use your phone and any

consequences of its use. You should switch off your phone

wherever the use of a phone is prohibited.



Avoid dropping, throwing, bending, or applying excessive

pressure to the device

Do not apply excessive pressure on the screen and the device to

prevent damaging them. It is also recommended that you store

the device in a protective case and only use your finger when

interacting with the touch screen. Cracked display screens due

to improper handling are not covered by the warranty.



Protect your phone



Always treat your phone and its accessories with care and

keep them in a clean and dust-free place and away from any

contaminants.



Do not expose your phone or its accessories to open flames or

lit tobacco products.



Do not paint your phone or its accessories.



Store your phone or its accessories at temperatures between

0°C to 40°C (32 °F to 104 °F).



Do not carry your phone in your back pocket as it could break

when you sit down.



Maintain a minimum separation distance of 1.5 cm between

the phone and your body.



Damage requiring service

Unplug the product from the electrical outlet and contact HTC’s

customer support via our website (www.htc.com) to locate an

authorized service technician or provider that can service your

device if

6 Safety and regulatory guide



The product has been damaged by being exposed to rain or

liquid, dropped, or subject to impact.



There are noticeable signs of overheating.



The product does not operate normally when you follow the

operating instructions.



Avoid pushing objects into product

Never push objects of any kind into cabinet slots or other

openings in the product. These openings must not be blocked or

covered.



Cleaning

Unplug the product from the wall outlet before cleaning. Do not

use liquid cleaners harsh chemicals, cleaning solvents or aerosol

s on the device or accessories. Use a damp cloth for cleaning,

but NEVER use water to clean the LCD screen.



Small children

Use of your device by small children should be supervised by an

adult. They could hurt themselves or others, or could

accidentally damage the phone. Your phone contains small parts

with sharp edges that may cause an injury or which could

become detached and create a choking hazard. Consult the

doctor immediately if the accessories or battery are swallowed.



Repetitive motion injuries

To minimise the risk of repetitive strain injuries, when texting or

playing games with your phone:



Do not grip the phone too tightly



Press the buttons lightly



Emergency calls

This phone, like any wireless phone, operates using radio signals,

which cannot guarantee connection in all conditions. Therefore,

you must never rely solely on any wireless phone for emergency

communications.

Disposal of your device

Please do not discard your device in a landfill. Electronic devices

contain substances that may be hazardous to the environment if

not properly disposed of. Please safely dispose of your device

through HTC’s free mail-back recycling program at

www.freeurecycle.com or by locating an e-waste drop-off point in

your community.

Safety and regulatory guide 7

Regulatory agency identifications

For regulatory identification purposes, your product is assigned a

model number of

2PS6400

Your phone’s FCC ID is

NM82PS6400.

To view your FCC ID in your device you may also go to the

Settings menu



About Phone



Legal Information



Regulatory.

This is a Class 1 laser device.

However, the design of this product incorporates optics, a

protective housing and scanning safeguard such that there is no

access to level of laser radiation above Class 1.

CAUTION:

Use of controls or adjustment or performance of

procedures other than those specified herein may result in

hazardous radiation exposure.

Location of the label on the product:

aser beams

8 Safety and regulatory guide

IMPORTANT NOTE:

The Country Code selection for 2.4 GHz WLAN is disabled on this

device. Operation in the 2.4 GHz band is restricted to Channels 1 –

11.

Federal Communication Commission interference

statement

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one of the

following measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.



Consult the dealer or an experienced radio or television

technician for help.

FCC Caution

: Any changes or modifications not expressly

approved by the party responsible for compliance could void the

user’s authority to operate this equipment.

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

FCC Hearing-Aid Compatibility (HAC) regulations for

wireless devices

The FCC has adopted rules to ensure reasonable access to

telecommunications services for persons with hearing disabilities.

As part of this effort, the industry uses a rating system for wireless

phones to help hearing device users find phones that may be

compatible with their hearing devices (hearing aids and cochlear

Safety and regulatory guide 9

implants). This hearing-aid compatibility (HAC) rating system is

described in the American National Standards Institute (ANSI)

C63.19 standard and includes the following ratings:

M-Ratings:

For phones that use acoustic coupling with hearing

devices that are not operating in telecoil mode.

Phones rated M3

or M4 meet FCC HAC requirements and are likely to generate less

radio frequency interference with hearing devices than phones

with lower ratings. M4 is the better/higher of the two ratings. Your

2PS6400

is rated

T-Ratings:

For phones that use inductive coupling with hearing

devices operating in telecoil mode.

Phones rated T3 or T4 meet

FCC HAC requirements and are likely to be more usable with a

hearing aid’s telecoil than phones that are not rated. T4 is the

better/higher of the two ratings. Your

2PS6400

is rated

This phone has been tested and rated for use with hearing aids for

some of the wireless technologies that it uses. However, there may

be some newer wireless technologies used in this phone that have

not been tested yet for use with hearing aids. It is important to try

the different features of this phone thoroughly and in different

locations, using your hearing aid or cochlear implant, to determine

if you hear any interfering noise. Consult your service provider or

the manufacturer of this phone for information on hearing aid

compatibility. If you have questions about return or exchange

policies, consult your service provider or phone retailer.

The ratings are not guarantees. Trying out the phone with your

hearing device is the best way to evaluate it for your personal

needs. Results will vary depending on a user’s hearing device and

hearing loss. For example, if some wireless phones are used near

some hearing devices, users may detect a buzzing, humming, or

whining noise. Some hearing devices are more immune than others

to this interference noise, and phones also vary in the amount of

interference they generate. If your hearing device happens to be

vulnerable to interference, you may not be able to use a rated

phone successfully.

Please power off the Bluetooth function while using hearing aid

devices with your

2PS6400

10 Safety and regulatory guide

For information about hearing aids and digital wireless

phones

FCC Hearing Aid Compatibility and Volume Control:

http://www.fcc.gov/cgb/dro/hearing.html

Hearing Aid Compatibility for Wireless Telephones

http://www.fcc.gov/guides/hearing-aid-compatibility-wireless

-telephones

Specific Absorption Rate (SAR) testing

Your device has been designed to comply with applicable limits for

RF exposure. These limits use a unit of measurement called

Specific Absorption Rate, or SAR, which refers to the rate at which

the human body absorbs RF energy. For more information on

Federal Communications Commission (FCC) SAR and radio

frequency exposure, please see our Radio Frequency Safety web

page at: http://www.htc.com/us/support/content.aspx?id=6505.

HTC Corp. submitted SAR test results demonstrating compliance

with the FCC’s SAR limit for wireless devices as part of the FCC’s

equipment certification process for this device. These results can

be accessed via the FCC’s equipment authorization database

(found at https://www.fcc.gov/general/fcc-id-search-page) by

searching for the device’s FCC ID:

NM82PS6400

. This device’s

maximum SAR values as reported to the FCC are:



Head: 0.73 W/kg@1g



Body-worn Accessory: 0.59 W/kg@1g

Body-worn operation

This device was tested for typical body-worn operations. A

minimum separation distance of 1 cm must be maintained between

the user’s body and the handset, including the antenna.

Third-party belt-clips, holsters, and similar accessories used by this

device should not contain any metallic components. Body-worn

accessories that do not meet these requirements may not comply

with RF exposure requirements and should be avoided.

RF radiation exposure statement



This equipment must not be co-located or operated in

conjunction with any other antenna or transmitter.



Use only the supplied or an approved antenna. Unauthorized

antennas, modifications, or attachments could impair call quality,

damage the phone, or result in violation of regulations. Do not

Inhaltsverzeichnis

Andere HTC Handy Handbücher

Beliebte Handy Handbücher anderer Marken

Zte

Zte BLADE A520 Bedienungsanleitung

Nokia

Nokia Lumia 620 Bedienungsanleitung

Blackbe;rry

Blackbe;rry KEYone Bedienungsanleitung

Bea-fon

Bea-fon X5 Premium Bedienungsanleitung

Blackbe;rry

Blackbe;rry 8707 Series Bedienungsanleitung

Blackbe;rry

Blackbe;rry Storm Betriebsanleitung

LG LM-X420QN Bedienungsanleitung

LifeWatch

LifeWatch V Bedienungsanleitung

Bea-fon

Bea-fon SILVER LINE SL860 Bedienungsanleitung

IKI Mobile

IKI Mobile KF4.5i Bedienungsanleitung

Hitech

Hitech HT-850 Bedienungsanleitung

Yezz

Yezz Fashion F10 Bedienungsanleitung

Point Mobile

Point Mobile PM60 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Q10 Bedienungsanleitung

Blackbe;rry

Blackbe;rry Bold 9900 Bedienungsanleitung

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Bedienungsanleitung

LG LM-K420EMW Bedienungsanleitung

ISAFE MOBILE

ISAFE MOBILE IS655.2 Bedienungsanleitung