Huawei TE30 Bedienungsanleitung

HUAWEI TE30 Videoconferencing Endpoint

Quick Start Guide

Huawei Proprietary and Confidential

Issue 09 (2014-01-21)



What's in the Box

TE30

Power adapter and power cable

Network cable

L-shaped bracket and hook-

and-loop fastener

Accessorial integration cable

HDMI cable

L-shaped bracket: secures the TE30 during

mounting.

Hook-and-loop fastener: secures the L-

shaped bracket to a monitor or bundles

cables.

This cable provides two female connectors and is

used to extend an HDMI cable for transmission over

a longer distance. Connect the two female

connectors to the HDMI connector of the integration

cable provided and the male connector of a standard

HDMI cable.

Extends the HDMI cable for longer

transmission.

Screw

Remote control

Qualification Card

Warranty Card

Safety Precautions

Quick Start Guide

Quick reference Guide

The power adapter, power cable, and accessorial integration cable in the box can be used only with the

endpoint in the same box. The item pictures are for your reference only.

Quick Start Guide

HUAWEI TE30 Videoconferencing Endpoint

Huawei Proprietary and Confidential

Issue 09 (2014-01-21)



Overview

The HUAWEI TE30 videoconferencing

endpoint (TE30 for short) delivers 1080p HD

video performance in a sleek design.

The TE30 features:

All-in-one design with simple installation

Voice dialing using English

Support for Wi-Fi access



Getting Started

No.

Component

Description

Built-in microphone

Provides 180-degree sound pickup with an optimal

range of six meters.

Lens

Uses 12x optical zoom lens.

MODE button

Restores the TE30 to its default settings if you

press and hold this button for 10 seconds or

more when the TE30 is operating properly.

HUAWEI TE30 Videoconferencing Endpoint

Quick Start Guide

Huawei Proprietary and Confidential

Issue 09 (2014-01-21)

No.

Component

Description

Enters the bootrom system if you press and hold

this button for 3 seconds or more when the TE30 is

being started.

Places the TE30 in sleep mode or wakes it up if you

press this button when it is operating properly.

Infrared receiver module

Receives infrared signals from the remote control

provided with the TE30.

OLED display

Displays the IP address, site number, and indications

for the sleep mode, startups, upgrades, and

malfunctions.

Status indicator

Indicates the TE30 status, including operating,

sleeping, malfunctioning, and upgrading.

SELECT button

When the TE30 is operating properly:

Toggles the VGA OUT port between VGA and

YPbPr modes if you press this button.

Restores the TE30 to the settings used during its

previous operating if you press and hold this button

for 10 seconds or more.

USB port

Connects to a USB flash drive.

LINE IN port

Connects to an audio input source, such as a computer

or mobile phone.

LINE OUT port

Connects to an audio output device, such as an external

speaker or monitor.

MIC/TV/LAN/POWER

port

Functions as an HDMI, Ethernet, microphone, or power

port using the integration cable provided.

VGA IN port

Connects to a VGA input source, such as a computer

or Digital Video Disc (DVD) player.

VGA OUT port

Connects to a VGA display device, such as a projector.

Note:

The TE30 itself weighs 2.1 kg, with the dimensions (H x W x D) of 157 mm x 235 mm x 167

mm (6.18 in. x 9.25 in. x 6.57 in.).

Before installing the TE30, prepare an electric screwdriver, hammer drill, and hammer.

Quick Start Guide

HUAWEI TE30 Videoconferencing Endpoint

Huawei Proprietary and Confidential

Issue 09 (2014-01-21)



Installation

Standard Mounting

If the monitor is 97 mm (3.82 in.) or slimmer, follow the steps in the following figure.

If the monitor is 170 mm (6.69 in.) or thicker or is wall-mounted, use the free-

standing, wall-mounting, inverted installation, or other installation options.

HUAWEI TE30 Videoconferencing Endpoint

Quick Start Guide

Huawei Proprietary and Confidential

Issue 09 (2014-01-21)

Wall-Mounting

Drill four holes in the wall for mounting the bracket, each with a diameter of 8 mm (0.31 in.)

and depth of 35 mm (1.38 in.). While drilling, make sure the two upper holes are in a straight

line and parallel to the ground, so the TE30 is level after installation. Connect the cables

delivered with the TE30. Then follow the steps in the following figure to install the TE30.

Quick Start Guide

HUAWEI TE30 Videoconferencing Endpoint

Huawei Proprietary and Confidential

Issue 09 (2014-01-21)

Free-Standing

Place the TE30 on a flat surface.

If you have to place the TE30 on an inclined surface, ensure that the inclination is less than 15°

so that the TE30 can function properly.

Inverted Installation

Purchase a bracket for inverted installation and mount the TE30 onto the ceiling using the

bracket.

The bracket must meet the following requirements:

It is able to bear a weight of at least 10.5 kg (23.15 lb) and has a thickness between 2 mm

(0.08 in.) to 3 mm (0.12 in.).

It comes with a location pillar, which can be inserted into the location hole of the TE30.

The distance between the screw hole on the bracket and location pillar must be 14.5 mm

(0.57 in.), which is also the distance between the two holes on the bottom of the TE30.

It comes with a screw hole and one or more 1/4"-20UNC screws.

When attaching the purchased bracket and TE30, it is recommended that you use a 1/4"-

20UNC screw delivered with the purchased bracket rather than a 1/4"-20UNC screw

delivered with the TE30 because the length of the latter may be too long or too short to

hold up the purchased bracket.

In this installation mode, the mesh enclosures of the microphones must be rotated 30

degrees in the directions shown in the following figure until they are tightened. Do not

rotate the mesh enclosures in other installation modes; otherwise, sound pickup may be

affecte.

HUAWEI TE30 Videoconferencing Endpoint

Quick Start Guide

Huawei Proprietary and Confidential

Issue 09 (2014-01-21)

Other Installation Options

Purchase a tripod and install the TE30 on it. The tripod must be able to bear a weight of at least

10.5 kg (23.15 lb), and the sizes and positions of its holes must be the same as those of the

holes on the bottom of the TE30.



Connecting Cables

The following figure shows a cable connection example in which the HDMI port is used for

video output.

Quick Start Guide

HUAWEI TE30 Videoconferencing Endpoint

Huawei Proprietary and Confidential

Issue 09 (2014-01-21)

The VGA cable is not provided with the TE30. You need to purchase it by yourself.

The cable connection shown in the preceding figure is the simplest and provided only for reference. Visit

http://enterprise.huawei.com and choose SUPPORT > Product Support > Unified Communications and

Collaboration > Telepresence and Videoconferencing > Videoconferencing Endpoints to access the

HUAWEI TE30 Videoconferencing Endpoint User Guide for more cable connection instructions.



Powering On the TE30

1 With all cables connected correctly, use the power adapter to connect the TE30 to a power supply.

When the power adapter indicator turns on, the TE30 automatically powers on and the Wizard

screen is displayed.

2 If the HDMI port is used for video output, after you set the parameters on the Wizard screen, the

menu screen is displayed.

3 If the VGA OUT port is used for video output, perform the following steps to access the menu

screen. Press and hold on the remote control for 5 seconds. Choose Advanced Settings >

Settings > Video > Common Settings, select Video Output, and select VGA OUT for GUI,

Caption output, and Main output interface.

4 The following table describes the TE30 indicator status.

Indicator

Status

TE30 Status

Indicator

Status

TE30 Status

Blinking

green

Starting or

upgrading

Steady orange

Powered off but connected to the power

supply

Steady

green

Operating

properly

Off

Disconnected from the power supply

Blinking

orange

Sleeping

Blinking red

Encountered a fault, such as a self-

check error, overheating, and software

malfunction



Loading the Configuration File

The TE30 automatically loads the configuration file on a USB device, such as a USB flash drive.

After the configuration file is loaded, the TE30 works properly. If no USB device is available,

load the configuration file on the Wizard screen.

Do not turn the TE30 or stop it from turning using your hands or other

forces when the TE30 is powered on and working properly.

HUAWEI TE30 Videoconferencing Endpoint

Quick Start Guide

Huawei Proprietary and Confidential

Issue 09 (2014-01-21)

Using a USB Device

The USB device is provided by your operator or Huawei's reseller or service engineers. Huawei's

service engineers provide the configuration file, which you must not modify unless requested to

do so.

To load the configuration file on the USB device:

1. Insert the USB device into the USB port in the TE30.

2. When prompted, click Yes.

The TE30 automatically loads the configuration file and restarts.

If you do not perform any operations within 10 seconds after you insert a USB device, the TE30 automatically

loads the configuration file and restarts.

3. Remove the USB device.

Using the Wizard Screen

Setting General Parameters

5 When the TE30 is connected to a monitor and both are powered on, the monitor displays the

Wizard screen by default.

When powered on for the first time, your

TE30 prompts you to select a language.

After you select a language, the screen

shown on the left is displayed for you to set

the general parameters.

Parameter

Description

Setting

NMS server

IP address of the SMC 2.0.

Contact your local reseller or

operator.

If the network has no SMC 2.0

deployed, leave this field blank.

IPv4

IPv6

IPv4 settings for the TE30.

Under IPv4, you must set

Connection type, Local IP

address, Subnet mask, and

Gateway address.

By default, IPv6 is not selected.

If you select IPv6, you must set

Connection type, Local IP

address, Subnet prefix length, and

Quick Start Guide

HUAWEI TE30 Videoconferencing Endpoint

Huawei Proprietary and Confidential

Issue 09 (2014-01-21)

Parameter

Description

Setting

IPv6 settings for the TE30.

Gateway address. The TE30 will

then use IPv4 or IPv6 to

communicate with another endpoint

based on the endpoint's support for

IPv6.

Connection type

Mode for obtaining an IP address.

Static IP: Your network

administrator assigns an IP

address to your TE30. If you

select this option, you must

also set Local IP address,

Subnet mask, and Gateway

address.

Dynamic IP: When a DHCP

server is available on the

network, your TE30

automatically obtains an IP

address using the Dynamic

Host Configuration Protocol

(DHCP).

The default value is Static IP.

If you have set NMS server, select

Static IP for this parameter.

Local IP address

Subnet mask

IP address and subnet mask of

your TE30.

To enable the TE30 to

automatically obtain the NMS

server settings from the SMC 2.0,

ensure that the IP address of the

TE30 is in the same network

segment as that of the SMC 2.0.

Contact your network

administrator.

If an IP address conflict occurs,

change this IP address to one in the

specified IP address range. For example, if

the IP address range is 192.168.1.1 through

192.168.1.100, and the current IP address

is 192.168.1.2, change the section in

bold while ensuring that the new IP

address is still in the IP address range.

Examples:

IPv4 address: 192.168.1.1

IPv6 address:

2000:0:0:0:200:55:26:1

Andere Handbücher für TE30

Inhaltsverzeichnis

Andere Huawei Konferenzsystem Handbücher

Huawei

Huawei Bar 500 Bedienungsanleitung

Huawei

Huawei TP3106-70 Bedienungs- und Sicherheitshinweise

Huawei

Huawei ViewPoint 8050 Bedienungsanleitung

Huawei

Huawei RP100 Bedienungsanleitung

Huawei

Huawei Box 700 Bedienungs- und Sicherheitshinweise

Huawei

Huawei TE30 Bedienungs- und Sicherheitshinweise

Huawei

Huawei V100R001 Bedienungsanleitung

Huawei

Huawei eSpace IAD Betriebsanleitung

Huawei

Huawei TE30 Benutzerhandbuch

Huawei

Huawei TE40 Bedienungsanleitung

Huawei

Huawei MA5833-BS60 Bedienungsanleitung

Huawei

Huawei 9000 VCT V100R011 Service-Handbuch

Huawei

Huawei Mic 500T Bedienungsanleitung

Huawei

Huawei TE40 Service-Handbuch

Huawei

Huawei T10 V500R003C30 Bedienungsanleitung

Huawei

Huawei TE30 Bedienungsanleitung

Huawei

Huawei TE30 Bedienungsanleitung

Huawei

Huawei TP1102 Telepresence V100R001 Bedienungsanleitung

Huawei

Huawei U-SYS IAD 101S Bedienungsanleitung

Huawei

Huawei TP3106 Bedienungsanleitung

Huawei

Huawei TE30 Bedienungsanleitung

Huawei

Huawei TP3206 Bedienungsanleitung

Huawei

Huawei TE20 Service-Handbuch

Huawei

Huawei RP100 Benutzerhandbuch

Beliebte Konferenzsystem Handbücher anderer Marken

Kramer

Kramer VIA GO Bedienungsanleitung

AVT

AVT MAGIC AC1 Go Bedienungsanleitung

ProSoft Technology

ProSoft Technology AN-X4-AB-DHRIO Bedienungsanleitung

Sony

Sony PCS-I150 Bedienungsanleitung

Middle Atlantic Products

Middle Atlantic Products VTC Series Bedienungsanleitung

Prentke Romich Company

Prentke Romich Company Vanguard Plus Leitfaden

Speakerbus

Speakerbus iD 712 Bedienungsanleitung

Trelleborg

Trelleborg SafePilot CAT PRO Bedienungsanleitung

Sennheiser

Sennheiser ADN Bedienungsanleitung

ADTRAN

ADTRAN NetVanta 7100 Bedienungsanleitung

AINA

AINA PTT Voice Responder Bedienungsanleitung

Yamaha

Yamaha ProjectPhone PJP-100H Bedienungsanleitung

vissonic

vissonic VLI Series Bedienungsanleitung

Panasonic

Panasonic KX-VC500 Bedienungsanleitung

Poly

Poly Trio 8300 Bedienungsanleitung

Crestron

Crestron Mercury CCS-UCA-SMK Maßzeichnung

Inmarsat

Inmarsat mini M Bedienungsanleitung

Tenveo

Tenveo ALL-IN-ONE Bedienungsanleitung