Huawei LUNA2000-100KTL-M1 Bedienungsanleitung
LUNA2000-100KTL-M1 Smart Power Control
System
User Manual
Issue 02
Date 2023-01-10
HUAWEI TECHNOLOGIES CO., LTD.
Copyright © Huawei Technologies Co., Ltd. 2023. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means without prior
written consent of Huawei Technologies Co., Ltd.
Trademarks and Permissions
and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.
All other trademarks and trade names mentioned in this document are the property of their respective
holders.
Notice
The purchased products, services and features are stipulated by the contract made between Huawei and
the customer. All or part of the products, services and features described in this document may not be
within the purchase scope or the usage scope. Unless otherwise specied in the contract, all statements,
information, and recommendations in this document are provided "AS IS" without warranties, guarantees
or representations of any kind, either express or implied.
The information in this document is subject to change without notice. Every eort has been made in the
preparation of this document to ensure accuracy of the contents, but all statements, information, and
recommendations in this document do not constitute a warranty of any kind, express or implied.
Huawei Technologies Co., Ltd.
Address: Huawei Industrial Base
Bantian, Longgang
Shenzhen 518129
People's Republic of China
Website: https://e.huawei.com
Issue 02 (2023-01-10) Copyright © Huawei Technologies Co., Ltd. i
About This Document
Purpose
This document describes the installation, electrical connections, commissioning,
maintenance, and troubleshooting of the LUNA2000-100KTL-M1 Smart Power
Control System (also referred to as Smart PCS). Before installing and operating the
Smart PCS, ensure that you are familiar with the features, functions, and safety
precautions provided in this document.
Intended Audience
This document is applicable to:
● Installers
● Users
Symbol Conventions
The symbols that may be found in this document are dened as follows.
Symbol Description
Indicates a hazard with a high level of risk which, if not avoided,
will result in death or serious injury.
Indicates a hazard with a medium level of risk which, if not
avoided, could result in death or serious injury.
Indicates a hazard with a low level of risk which, if not avoided,
could result in minor or moderate injury.
Indicates a potentially hazardous situation which, if not avoided,
could result in equipment damage, data loss, performance
deterioration, or unanticipated results.
NOTICE is used to address practices not related to personal injury.
Supplements the important information in the main text.
NOTE is used to address information not related to personal
injury, equipment damage, and environment deterioration.
LUNA2000-100KTL-M1 Smart Power Control System
User Manual About This Document
Issue 02 (2023-01-10) Copyright © Huawei Technologies Co., Ltd. ii
Change History
Changes between document issues are cumulative. The latest document issue
contains all updates made in previous issues.
Issue 02 (2023-01-10)
Updated 1 Safety Information.
Updated 4.3 Pre-installation Checks.
Updated 5.1 Precautions.
Updated 5.7 Connecting AC Power Cables.
Updated 6.2 Powering On the Smart PCS.
Added 6.5 Setting Parameters.
Updated 7 Device Maintenance.
Updated 7.4 Replacing the Smart PCS.
Updated B Grid Codes.
Issue 01 (2022-11-10)
This issue is used for rst oce application (FOA).
LUNA2000-100KTL-M1 Smart Power Control System
User Manual About This Document
Issue 02 (2023-01-10) Copyright © Huawei Technologies Co., Ltd. iii
Contents
About This Document................................................................................................................ ii
1 Safety Information.................................................................................................................. 1
1.1 Personal Safety.........................................................................................................................................................................2
1.2 Electrical Safety........................................................................................................................................................................4
1.3 Environment Requirements................................................................................................................................................. 7
1.4 Mechanical Safety................................................................................................................................................................... 8
2 Product Overview..................................................................................................................13
2.1 Model........................................................................................................................................................................................ 13
2.2 Functions and Features....................................................................................................................................................... 14
2.3 Appearance............................................................................................................................................................................. 15
2.4 Working Principle..................................................................................................................................................................17
2.4.1 Circuit Diagram.................................................................................................................................................................. 17
2.4.2 Working Modes.................................................................................................................................................................. 18
2.5 Typical Application Scenario............................................................................................................................................. 19
3 Storage.....................................................................................................................................22
4 Installation..............................................................................................................................23
4.1 Environment Requirements............................................................................................................................................... 23
4.2 Preparing Tools...................................................................................................................................................................... 25
4.3 Pre-installation Checks........................................................................................................................................................27
4.4 Moving the Smart PCS........................................................................................................................................................ 28
4.5 Installing the Smart PCS.....................................................................................................................................................30
5 Electrical Connections.......................................................................................................... 33
5.1 Precautions.............................................................................................................................................................................. 33
5.2 Preparing Cables................................................................................................................................................................... 34
5.3 Connecting the Ground Cable.......................................................................................................................................... 35
5.4 Opening the Maintenance Compartment Doors....................................................................................................... 36
5.4.1 Opening the DC Maintenance Compartment Door.............................................................................................. 36
5.4.2 Opening the AC Maintenance Compartment Door...............................................................................................37
5.5 Replacing the Crimping Module...................................................................................................................................... 38
5.6 Connecting the DC Power Cable..................................................................................................................................... 39
5.7 Connecting AC Power Cables............................................................................................................................................40
LUNA2000-100KTL-M1 Smart Power Control System
User Manual Contents
Issue 02 (2023-01-10) Copyright © Huawei Technologies Co., Ltd. iv
5.8 Connecting FE Communications Cables........................................................................................................................43
5.9 Closing Maintenance Compartment Doors................................................................................................................. 46
5.9.1 Closing the DC Maintenance Compartment Door................................................................................................. 46
5.9.2 Closing the AC Maintenance Compartment Door................................................................................................. 47
6 Power-On Commissioning................................................................................................... 48
6.1 Checking Before Power-On................................................................................................................................................50
6.2 Powering On the Smart PCS............................................................................................................................................. 51
6.3 Downloading the App......................................................................................................................................................... 51
6.4 App Commissioning............................................................................................................................................................. 53
6.5 Setting Parameters............................................................................................................................................................... 55
6.5.1 Setting Grid Parameters.................................................................................................................................................. 55
6.5.2 Setting Protection Parameters...................................................................................................................................... 57
6.5.3 Setting Feature Parameters........................................................................................................................................... 59
6.5.4 Setting Power Adjustment Parameters...................................................................................................................... 69
7 Device Maintenance............................................................................................................. 72
7.1 Routine Maintenance.......................................................................................................................................................... 72
7.2 Powering O the Smart PCS.............................................................................................................................................74
7.3 Replacing a Fan..................................................................................................................................................................... 76
7.4 Replacing the Smart PCS....................................................................................................................................................80
7.5 Disposing of the Smart PCS.............................................................................................................................................. 84
8 Alarm Reference.................................................................................................................... 85
9 Technical Data........................................................................................................................96
A Crimping an OT or DT Terminal........................................................................................ 99
B Grid Codes.............................................................................................................................102
C Resetting Password............................................................................................................ 104
D Certicate Management and Maintenance................................................................. 105
E Contact Information........................................................................................................... 106
F Acronyms and Abbreviations............................................................................................108
LUNA2000-100KTL-M1 Smart Power Control System
User Manual Contents
Issue 02 (2023-01-10) Copyright © Huawei Technologies Co., Ltd. v
1 Safety Information
Statement
Before transporting, storing, installing, operating, using, and/or maintaining the
equipment, read this document, strictly follow the instructions provided herein,
and follow all the safety instructions on the equipment and in this document. In
this document, "equipment" refers to the products, software, components, spare
parts, and/or services related to this document; "the Company" refers to the
manufacturer (producer), seller, and/or service provider of the equipment; "you"
refers to the entity that transports, stores, installs, operates, uses, and/or
maintains the equipment.
The Danger, Warning, Caution, and Notice statements described in this
document do not cover all the safety precautions. You also need to comply with
relevant international, national, or regional standards and industry practices. The
Company shall not be liable for any consequences that may arise due to
violations of safety requirements or safety standards concerning the design,
production, and usage of the equipment.
The equipment should be used in an environment that meets the design
specications. Otherwise, the equipment may be faulty, malfunctioning, or
damaged, which is not covered under the warranty. The Company shall not be
liable for any property loss, personal injury, or even death caused thereby.
Comply with applicable laws, regulations, standards, and specications during
transportation, storage, installation, operation, use, and maintenance.
Do not perform reverse engineering, decompilation, disassembly, adaptation,
implantation, or other derivative operations on the equipment software. Do not
study the internal implementation logic of the equipment, obtain the source code
of the equipment software, violate intellectual property rights, or disclose any of
the performance test results of the equipment software.
The Company shall not be liable for any of the following circumstances or
their consequences:
● The equipment is damaged due to force majeure such as earthquakes, oods,
volcanic eruptions, debris ows, lightning strikes, res, wars, armed conicts,
typhoons, hurricanes, tornadoes, and other extreme weather conditions.
● The equipment is operated beyond the conditions specied in this document.
LUNA2000-100KTL-M1 Smart Power Control System
User Manual 1 Safety Information
Issue 02 (2023-01-10) Copyright © Huawei Technologies Co., Ltd. 1
● The equipment is installed or used in environments that do not comply with
international, national, or regional standards.
● You fail to follow the operation instructions and safety precautions on the
product and in the document.
● You remove or modify the product or modify the software code without
authorization.
● You or a third party authorized by you cause the equipment damage during
transportation.
● The equipment is damaged due to storage conditions that do not meet the
requirements specied in the product document.
● You fail to prepare materials and tools that comply with local laws,
regulations, and related standards.
● The equipment is damaged due to your or a third party's negligence,
intentional breach, gross negligence, or improper operations, or other reasons
not related to the Company.
1.1 Personal Safety
D ANGER
Ensure that power is o during installation. Do not install or remove a cable with
power on. Transient contact between the core of the cable and the conductor will
generate electric arcs or sparks, which may cause a re or personal injury.
D ANGER
Non-standard and improper operations on the energized equipment may cause
re, electric shocks, or explosion, resulting in property damage, personal injury, or
even death.
D ANGER
Before operations, remove conductive objects such as watches, bracelets, bangles,
rings, and necklaces to prevent electric shocks.
D ANGER
During operations, use dedicated insulated tools to prevent electric shocks or short
circuits. The dielectric withstanding voltage level must comply with local laws,
regulations, standards, and specications.
LUNA2000-100KTL-M1 Smart Power Control System
User Manual 1 Safety Information
Issue 02 (2023-01-10) Copyright © Huawei Technologies Co., Ltd. 2
WARNING
During operations, wear personal protective equipment such as protective
clothing, insulated shoes, goggles, safety helmets, and insulated gloves.
Figure 1-1 Personal protective equipment
General Requirements
● Do not stop protective devices. Pay attention to the warnings, cautions, and
related precautionary measures in this document and on the equipment.
● If there is a likelihood of personal injury or equipment damage during
operations, immediately stop, report the case to the supervisor, and take
feasible protective measures.
● Do not power on the equipment before it is installed or conrmed by
professionals.
● Do not touch the power supply equipment directly or with conductors such as
damp objects. Before touching any conductor surface or terminal, measure
the voltage at the contact point to ensure that there is no risk of electric
shock.
● Do not touch operating equipment because the enclosure is hot.
● Do not touch a running fan with your hands, components, screws, tools, or
boards. Otherwise, personal injury or equipment damage may occur.
● In the case of a re, immediately leave the building or the equipment area
and activate the re alarm or call emergency services. Do not enter the
aected building or equipment area under any circumstances.
Personnel Requirements
● Only professionals and trained personnel are allowed to operate the
equipment.
– Professionals: personnel who are familiar with the working principles and
structure of the equipment, trained or experienced in equipment
operations and are clear of the sources and degree of various potential
hazards in equipment installation, operation, maintenance
LUNA2000-100KTL-M1 Smart Power Control System
User Manual 1 Safety Information
Issue 02 (2023-01-10) Copyright © Huawei Technologies Co., Ltd. 3
– Trained personnel: personnel who are trained in technology and safety,
have required experience, are aware of possible hazards on themselves in
certain operations, and are able to take protective measures to minimize
the hazards on themselves and other people
● Personnel who plan to install or maintain the equipment must receive
adequate training, be able to correctly perform all operations, and understand
all necessary safety precautions and local relevant standards.
● Only qualied professionals or trained personnel are allowed to install,
operate, and maintain the equipment.
● Only qualied professionals are allowed to remove safety facilities and inspect
the equipment.
● Personnel who will perform special tasks such as electrical operations,
working at heights, and operations of special equipment should possess the
required local qualications.
● Only authorized professionals are allowed to replace the equipment or
components (including software).
● Only personnel who need to work on the equipment are allowed to access
the equipment.
1.2 Electrical Safety
D ANGER
Before connecting cables, ensure that the equipment is intact. Otherwise, electric
shocks or re may occur.
D ANGER
Non-standard and improper operations may result in re or electric shocks.
D ANGER
Prevent foreign matter from entering the equipment during operations. Otherwise,
equipment damage, load power derating, power failure, or personal injury may
occur.
WARNING
For the equipment that needs to be grounded, install the ground cable rst when
installing the equipment and remove the ground cable last when removing the
equipment.
LUNA2000-100KTL-M1 Smart Power Control System
User Manual 1 Safety Information
Issue 02 (2023-01-10) Copyright © Huawei Technologies Co., Ltd. 4
Andere Handbücher für LUNA2000-100KTL-M1
1
Inhaltsverzeichnis
Andere Huawei Steuerungssystem Handbücher
