Huawei ME936 Montageanleitung
HUAWEI ME936 LTE M.2 Module
Acceptance Inspection Guide
Issue
03
Date
2017-12-11
Copyright © Huawei Technologies Co., Ltd. 2017. All rights reserved.
No part of this manual may be reproduced or transmitted in any form or by any means without prior written
consent of Huawei Technologies Co., Ltd. and its affiliates ("Huawei").
The product described in this manual may include copyrighted software of Huawei and possible licensors.
Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract,
reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by
applicable laws or such actions are approved by respective copyright holders.
Trademarks and Permissions
, , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd.
LTE is a trade mark of ETSI.
Other trademarks, product, service and company names mentioned may be the property of their respective
owners.
Notice
Some features of the product and its accessories described herein rely on the software installed, capacities
and settings of local network, and therefore may not be activated or may be limited by local network
operators or network service providers.
Thus, the descriptions herein may not exactly match the product or its accessories which you purchase.
Huawei reserves the right to change or modify any information or specifications contained in this manual
without prior notice and without any liability.
DISCLAIMER
ALL CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”. EXCEPT AS REQUIRED BY APPLICABLE
LAWS, NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE MADE IN RELATION TO THE ACCURACY, RELIABILITY OR CONTENTS OF THIS
MANUAL.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HUAWEI BE
LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, OR LOSS OF
PROFITS, BUSINESS, REVENUE, DATA, GOODWILL SAVINGS OR ANTICIPATED SAVINGS
REGARDLESS OF WHETHER SUCH LOSSES ARE FORSEEABLE OR NOT.
THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO LIABILITY FOR PERSONAL
INJURY TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH A LIMITATION) OF HUAWEI ARISING
FROM THE USE OF THE PRODUCT DESCRIBED IN THIS MANUAL SHALL BE LIMITED TO THE
AMOUNT PAID BY CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT.
Import and Export Regulations
Customers shall comply with all applicable export or import laws and regulations and be responsible to
obtain all necessary governmental permits and licenses in order to export, re-export or import the product
mentioned in this manual including the software and technical data therein.
HUAWEI ME936 LTE M.2 Module
Acceptance Inspection Guide
About This Document
Issue 03 (2017-12-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3
About This Document
Revision History
Document
Version
Date
Chapter
Description
01
2014-07-14
-
Creation
02
2017-08-22
2.1
Updated Figure 2-1 Large carton
packaging
2.2
Deleted Figure 2-4 Top layout of
ME936 label in issue 01
2.2
Deleted Figure 2-5 Bottom layout
of ME936 label in issue 01
2.2
Updated Figure 2-4 ME936 label
03
2017-12-11
-
Deleted privacy policy
HUAWEI ME936 LTE M.2 Module
Acceptance Inspection Guide
Introduction
Issue 03 (2017-12-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4
Contents
1 Introduction....................................................................................................................................5
1.1 Purpose............................................................................................................................................ 5
1.2 Scope ............................................................................................................................................... 5
2 Acceptance Inspection..................................................................................................................6
2.1 Packaging Modes and Appearance ................................................................................................. 6
2.2 Label Inspection............................................................................................................................... 8
2.3 Performance Inspection ................................................................................................................... 9
2.4 Repack the Module after Inspection............................................................................................... 12
HUAWEI ME936 LTE M.2 Module
Acceptance Inspection Guide
Introduction
Issue 03 (2017-12-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5
1 Introduction
1.1 Purpose
This document describes the methods of inspecting Huawei's shipments of ME936
module. Customers can refer to this document when formulating inspection guides
for accepting Huawei ME936 module.
1.2 Scope
This guide is applicable to the acceptance inspection of Huawei ME936 module. The
inspection methods provided in this guide are recommendations, which can be
modified by customers if necessary.
HUAWEI ME936 LTE M.2 Module
Acceptance Inspection Guide
Acceptance Inspection
Issue 03 (2017-12-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6
2 Acceptance Inspection
2.1 Packaging Modes and Appearance
The first-layer packages for the ME936 are large cartons, the second-layer packages
are trays, as shown in the following figures.
Figure 2-1 Large carton packaging
Carton ID
Weight Label
Delivery Label
HUAWEI ME936 LTE M.2 Module
Acceptance Inspection Guide
Acceptance Inspection
Issue 03 (2017-12-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7
Check whether the package has serious damage and has been opened.
Check whether the number of Carton ID labels attached on the large carton is consistent
with the number of trays in the large carton.
Figure 2-2 The tray
Icon Direction
Paste Datum
HUAWEI ME936 LTE M.2 Module
Acceptance Inspection Guide
Acceptance Inspection
Issue 03 (2017-12-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8
Figure 2-3 The layout inside the tray
Insert
Direction
Check whether the packaging modes are consistent with those shown in the previous
figures.
The ME936 modules are packed in trays. Check the trays for damage.
2.2 Label Inspection
Figure 2-4 ME936 label
Top Label Bottom Label
HUAWEI ME936 LTE M.2 Module
Acceptance Inspection Guide
Acceptance Inspection
Issue 03 (2017-12-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
9
Check whether the information on the label of an ME936 is consistent with the
corresponding label shown in Figure 2-4 . There are two kinds of labels for ME936 and you
can find one that is corresponding to the label shown in Figure 2-4 , which is the general
version. If the label is customized, please refer to the approval sheet.
Use a 2D barcode scanner to read the 2D barcode and check whether the number read
from the barcode is consistent with the IMEI number printed on the label.
2.3 Performance Inspection
Testing tools: USB cable, development kit and PC
Testing system: Windows 8/Windows 8.1
The following is the procedure:
Step 1 Plug the module onto the development kit, and then use the USB cable to connect
the development kit to the PC.
Step 2 Enter Program Manager as shown in the following figure.
HUAWEI ME936 LTE M.2 Module
Acceptance Inspection Guide
Acceptance Inspection
Issue 03 (2017-12-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
10
Step 3 Click Settings on the charm bar as shown in the following figure.
Step 4 Click Change PC settings in Settings as shown in the following figure.
Andere Handbücher für ME936
2
Inhaltsverzeichnis
Andere Huawei Steuereinheit Handbücher
Huawei
Huawei SmartModule1000A01 Bedienungsanleitung
Huawei
Huawei MU739 Montageanleitung
Huawei
Huawei MU609 Handbuch
Huawei
Huawei RRU3269 Bedienungsanleitung
Huawei
Huawei MU736 HSPA+ M.2 Montageanleitung
Huawei
Huawei ME909s-120 Montageanleitung
Huawei
Huawei UPS5000-H-400K-NT Bedienungsanleitung
Huawei
Huawei MU709Gs-8 Bedienungsanleitung
Huawei
Huawei SmartLogger2000 series Bedienungsanleitung
Huawei
Huawei ME919Bs-567bN Bedienungsanleitung
Huawei
Huawei EM770V Bedienungsanleitung
Huawei
Huawei ME906V Bedienungsanleitung
Huawei
Huawei MU709s-2 Montageanleitung
Huawei
Huawei MU709s-2 Montageanleitung
Huawei
Huawei ME906s Bedienungsanleitung
Huawei
Huawei EDFA0820-D Betriebsanleitung
Huawei
Huawei ME909 Series Montageanleitung
Huawei
Huawei MU709 Series Montageanleitung
Huawei
Huawei MU509 Series Bedienungsanleitung
Huawei
Huawei EM770U Bedienungsanleitung
Beliebte Steuereinheit Handbücher anderer Marken
Festo
Festo Compact Performance CP-FB6-E Stücklistenhandbuch
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung
JS Automation
JS Automation MPC3034A Bedienungsanleitung
JAUDT
JAUDT SW GII 6406 Series Kurzanleitung
Spektrum
Spektrum Air Module System Bedienungsanleitung
BOC Edwards
BOC Edwards Q Series Bedienungsanleitung
