Huawei SmartModule1000A01 Bedienungsanleitung

HUAWEI TECHNOLOGIES CO., LTD.

Issue: 04

Part Number: 31500BWV

Date: 2020-05-11

SmartModule1000A01

Quick Guide

1Overview

•The information in this document is subject to change due to version upgrade or

other reasons. Every effort has been made in the preparation of this document

to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute a warranty of any kind,

express or implied. You can download this document by scanning the QR code.

•Operation personnel should understand the composition and working principles

of the grid-tied PV power system and local regulations.

(1) LED indicators (RUN, ALM)

(2) Mounting ear

(3) Guide rail clamp

(4) COM ports (COM1, COM2, COM3)

(5) DI ports (DI)

(6) 12 V

output power port (12V/GND)

(7) AI ports (AI)

(8) Potential transformer (PT) ports (PT1, PT2)

(9) Protective ground point

(10) 12 V

input power port (DC IN 12V, 1A)

(11) 24 V

input power port (DC IN 24V, 0.8A)

(12) GE ports (GE1, GE2, GE3, GE4)

(13) RST button (RST)

•Before installing the device, closely read the user manual to get familiar with product

information and safety precautions. Huawei shall not be liable for any consequence caused by

violation of the storage, installation, and operation regulations specified in this document and

the user manual.

•Use insulated tools when installing the device. For personal safety, wear proper personal

protective equipment (PPE).

2Installation Requirements

3Device Installation

Dimensions Space

Wall-Mounted Installation

•Install the SmartLogger and SmartModule on a flat and secure interior wall.

•When wall-mounting the SmartLogger and SmartModule, ensure that the cable connection area

faces downward for ease of cable connection and maintenance.

•You are advised to use the delivered tapping screws and expansion tubes.

1. Connect the SmartLogger to the SmartModule using a connecting plate.

If the SmartLogger

and SmartModule

have been

combined before

delivery, skip this

step.

2. Install the SmartLogger and SmartModule.

Guide Rail-Mounted Installation (Stand-alone)

•Before installation, prepare a standard 35 mm guide rail and secure it.

•The recommended effective length of the guide rail is 360 mm or greater.

•Ensure that the SIM card slot on the SmartLogger is not blocked.

Guide Rail-Mounted Installation (Combined)

•Before installation, prepare a standard 35 mm guide rail and secure it.

•The recommended effective length of the guide rail is 360 mm or greater.

•Ensure that the SIM card slot on the SmartLogger is not blocked.

1. Connect the SmartLogger to the SmartModule using a connecting plate.

2. Install the SmartLogger and SmartModule.

If the SmartLogger and

SmartModule have been

combined before delivery,

you only need to remove

the mounting ears and

guide rail clamps in the

middle. You do not need

to use a connecting plate

to connect the

SmartLogger and

SmartModule.

4Electrical Connections

Preparing Cables

4.1

Type

Recommended Specifications

Protective

earthing (PE) cable

Outdoor copper cable with a cross

-sectional area of 4–6 mm2

–10 AWG

Ethernet

cable

Delivered

with the SmartModule

12 V

input power cable

Delivered

with the SmartModule

RS485 communications cable

Two

-core or multi-core cable with a cross-sectional area of 0.2–

2.5 mm

2or 24–14 AWG

DI signal cable

Two

-core or multi-core cable with a cross-sectional area of 0.2–

1.5 mm

2or 24–16 AWG

Output p

ower cable

AI signal cable

PT signal cable

For details about the cables and cable connection operations,

see the documents

delivered with the PT100/PT1000.

(Optional) 24 V

input power cable

Two

-core cable with a cross-sectional area of 0.2–1.5 mm2or

–16 AWG

•Connect cables in accordance with the installation laws and regulations of the country or region

where the project is located.

•Before connecting cables to ports, leave enough slack to reduce the tension on the cables and

prevent poor cable connections.

Connecting the PE Cable

4.2

•To enhance the

corrosion resistance of

the ground terminal,

you are advised to

apply silica gel or paint

on it after connecting

the ground cable.

•If the SmartLogger is

connected to the

SmartModule over a

connecting plate,

connect a PE cable to

the ground point of the

SmartLogger or

SmartModule based on

site requirements.

Connecting the Ethernet Cable

4.3

•The SmartModule can be connected to the SmartLogger and a PC over the GE port.

•Connect the LAN port on the SmartLogger to one GE port on the SmartModule using an

Ethernet cable.

•If the delivered network cable is too short, you are advised to prepare a network cable of Cat 5e

or higher specifications and shielded RJ45 connectors. It is recommended that the cable length

be less than or equal to 100 m. When crimping the network cable, ensure that the shielding

layer of the cable is securely connected to the metal shell of the RJ45 connectors.

(1) White

and-

orange

(2) Orange

(3) White

and-

green

(4) Blue

(5) White

and-

blue

(6) Green

(7) White

and-

brown

(8) Brown

Connecting the 12 V Input Power Cable

4.4

The SmartLogger connects to the power supply over the 12 V input power port, and the 24 V input

power port of the SmartLogger functions as the 12 V output power port to supply power to the

SmartModule.

Connecting the RS485 Communications Cable

4.5

Port

Identifier

Description

COM1, COM2, COM3

RS485A, RS485 differential signal+

–

RS485B, RS485 differential signal

–

•It is recommended that the RS485 communication distance be less than or equal to 1000 m.

•The SmartModule can connect to RS485 communications devices, such as a solar inverter, an

environmental monitoring instrument (EMI), and a power meter over the COM port.

•Ensure that the RS485+ and RS485–terminals are respectively connected to the COM+ and

COM–ports on the SmartModule.

Cascading Connection

•You are advised to connect fewer than 30 devices to each RS485 route.

•The baud rate, communications protocol, and parity mode of all devices on the RS485

cascading link must be the same as those of the COM ports on the SmartModule.

Connecting the DI Signal Cable

4.6

•The SmartModule can receive DI signals such as remote power grid scheduling commands and

alarms over DI ports. It can only receive passive dry contact signals.

•It is recommended that the signal transmission distance be less than or equal to 10 m.

Port

Description

DI1

Can receive passive

dry contact signals.

DI2

DI3

DI4

Connecting the Output Power Cable

4.7

•In the grid connection with limited power or audible and visual alarm scenarios, the

SmartModule can drive the coils of the intermediate relay over the 12 V output power port.

•It is recommended that the transmission distance be less than or equal to 10 m.

Intermediate relay

Connecting the AI Signal Cable

4.8

•The SmartModule can receive AI signals from the EMIs over the AI ports.

•It is recommended that the transmission distance be less than or equal to 10 m.

•AI ports 1, 2, 3, and 4 are for AI+ signals, and the GND port is for AI–signals.

Port

Description

AI1

Supports 0

–10 V

input voltage.

AI2

Supports 4

–

20 mA or

–20 mA input

current.

AI3

AI4

Connecting the PT Signal Cable

4.9

The SmartModule provides two PT ports, which can be used to connect to three-wire or two-wire

PT100/PT1000 temperature sensors.

Three-Wire System

PT100/PT1000 temperature sensor

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Huawei Steuereinheit Handbücher

Huawei

Huawei SmartLogger2000-10-C-JP Bedienungsanleitung

Huawei

Huawei ME909U-523D Bedienungsanleitung

Huawei

Huawei MU609 Montageanleitung

Huawei

Huawei ME909s-120 Montageanleitung

Huawei

Huawei ME906V Bedienungsanleitung

Huawei

Huawei Atool Bedienungsanleitung

Huawei

Huawei MU739 Montageanleitung

Huawei

Huawei SmartLi-ESM-24020P1 Bedienungsanleitung

Huawei

Huawei ME906E Bedienungsanleitung

Huawei

Huawei UPS5000-E-400K-SMS Bedienungsanleitung

Huawei

Huawei UPS5000-H Series Bedienungsanleitung

Huawei

Huawei SmartAX MA5811S-AE08 Bedienungsanleitung

Huawei

Huawei SmartAX MA5600T Leitfaden

Huawei

Huawei ME909u-521 Montageanleitung

Huawei

Huawei MU609 Handbuch

Huawei

Huawei ME909 Series Montageanleitung

Huawei

Huawei EM775 Bedienungsanleitung

Huawei

Huawei MU709s-2 Montageanleitung

Huawei

Huawei ME919Bs-567bN Bedienungsanleitung

Huawei

Huawei SmartAX MA5606T Technische Daten

Huawei

Huawei UPS5000-E Series Bedienungsanleitung

Huawei

Huawei MU509-65 Montageanleitung

Huawei

Huawei V100R001C00 Bedienungsanleitung

Huawei

Huawei ME906s Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung