Huawei AC6005 Bedienungsanleitung

Huawei Access Controller AC6005 Ordering Guide Public

Huawei Access Controller AC6005 Ordering Guide

Product Overview

Huawei AC6005 is an access controller (AC) of a large capacity and high performance. It is highly reliable,

easy to install and maintain, and features such advantages as flexible networking and energy conservation.

WLAN AC6005 is located between an access device and aggregation device or between an access device

and a core switch. It is usually deployed in residential areas, corridors, or central equipment rooms in

buildings and installed in an indoor rack, cabinet, or on a desk. The AC6005 connects to APs through

network interfaces to provide access services for users.

TheAC6005 has two models: AC6005-8-PWR andAC6005-8. TheAC6005 provides six GE electrical

interfaces, two GE combo interfaces, an RS232 serial interface, and a USB interface. The six GE electrical

interfaces and two GE combo electrical interfaces can work at a rate of 10/100/1000 Mbit/s. The two GE

combo optical interfaces support 100/1000 Mbit/s auto-sensing optical modules. GE electrical interface 1

can be used as a 100 Mbit/s management network interface. Compared to theAC6005-8, theAC6005-8-

PWR can function as a power sourcing equipment (PSE) to supply power.

Recommended Configurations

Table 1-1 Recommended configurations

Part

Number

Part Description

Configuration Description

Quantity

AC6005

02356813

AC6005-8-PWR-8AP

Bundle(Including AC6005-

8-PWR,Resource License

8AP)

Quotation is required. It can function as a PSE to

supply power.

Optical module

02315200

Datacom Products,

DP0M0SFP, Optical

Transceiver, eSFP, GE,

Single-mode Module (1310

nm, 10 km, LC)

Optional. Quotation is required.

The quantity is determined according to project

requirements. It is used on combo optical

interfaces.

Optical fiber

14130199

Patch Cord, LC/PC-LC/PC,

Single-mode, G.652D, 2

mm, 10 m

Optional. Single-mode, G.652D, 2 mm, 10 m.

14130251

Patch Cord, LC/PC-LC/PC,

Single-mode, G.652D, 2

mm, 20 m

Optional. Single-mode, G.652, 2 mm, 20 m.

14130282

Patch Cord, LC/PC,

LC/PC, Single-Mode,

G.652D, 2 mm, 30 m

Optional. Single-mode, G.652, 2 mm, 30 m.

Huawei Access Controller AC6005 Ordering Guide Public

Configuration Process

To configure the AC6005, perform the following steps:

Select anAC6005 model->Select licenses->Select accessories

1. Select an AC6005 model.

TheAC6005 are available in three models. The three models can manage eightAPs by default.

Table 1-2 List ofAC6005 models

Part

Number

Part Description

Configuration Description

02356813

AC6005-8-PWR-8AP Bundle(Including AC6005-8-

PWR,Resource License 8AP)

Quotation is required. It can

function as a PSE to supply power.

02356816

Assembling Components,AC6005-8-8AP

Bundle(Including AC6005-8,Resource License 8AP)

Quotation is required.

It cannot be used as a PSE.

02356920

Assembling Components,WLAN-D8-S Bundle(Including

AC6005-8-8AP,Eight AP3010DN-AGN-CN)

Quotation is required.

It is a distribution model sold only

in China.

2. Select licenses.

When the number of APs supported by the purchased ACs cannot meet the customer's requirement or

the customer needs to expand the network capacity, the customer needs to purchase licenses to

increase the number of APs supported by the AC6005.

Skip this step if the purchasedAC models meet requirements.

TheAC6005 supports three types of licenses, as shown in the following table.

Table 1-3 List ofAC6005 licenses

Part

Number

Part Description

Configuration Description

88031VEB

Software Charge,AC6005,L-

AC6005-1AP-S,AC6005 Access

Controller AP Resource

License(1 AP)

Quotation is required. The quantity is determined according

to project requirements. This license applies only to the

AC6005. The total number of the selected licenses and

available licenses on the device cannot exceed 128.

88031VEA

Software Charge,AC6005,L-

AC6005-8AP-S,AC6005 Access

Controller AP Resource

License(8 AP)

Quotation is required. The quantity is determined according

to project requirements. This license applies only to the

AC6005. The total number of the selected licenses and

available licenses on the device cannot exceed 128.

88031VEC

Software Charge,AC6005,L-

AC6005-32AP,AC6005 Access

Controller AP Resource

License(32 AP)

Quotation is required. The quantity is determined according

to project requirements. This license applies only to the

AC6005. The total number of the selected licenses and

available licenses on the device cannot exceed 128. It is sold

only on markets outside China.

Huawei Access Controller AC6005 Ordering Guide Public

3. Select accessories.

To select AC6005 accessories, perform the following steps:

Select optical modules->Select optical fibers->Select network cables

(1) Select optical modules.

TheAC6005 provides two GE combo interfaces. Select optical modules of proper types according

to the interfaces used.

Table 1-4 List of optical modules

Part

Number

Part Description

Configuration Description

02230YGU

AC6005, GE-SFP Optical Transceiver

02315204

Datacom Products, DP0M0ESFP,

Optical Transceiver, eSFP, GE,

Multimode Module (850 nm, 0.5 km,

LC)

Optional. Quotation is required.

1. This item is a GE optical module and has

independent transmit and receive channels. It is

used on combo optical interfaces of the

AC6005.

2. Each AC6005 can have at most two such

modules configured.

3. Each module has two optical fibers configured:

a Tx fiber and an Rx fiber.

02315200

Datacom Products, DP0M0SFP, Optical

Transceiver, eSFP, GE, Single-mode

Module (1310 nm, 10 km, LC)

Optional. Quotation is required.

1. This item is a GE optical module and has

independent transmit and receive channels. It is

used on combo optical interfaces of the

AC6005.

2. Each AC6005 can have at most two such

modules configured.

3. Each module has two optical fibers configured:

a Tx fiber and an Rx fiber.

02317346

Switch Products, LE0M0GS4DD,

Optical Transceiver, eSFP, GE, Single-

mode Module (1310 nm, 40 km, LC)

Optional. Quotation is required.

1. This item is a GE optical module and has

independent transmit and receive channels. It is

used on combo optical interfaces of the

AC6005.

2. Each AC6005 can have at most two such

modules configured.

3. Each module has two optical fibers configured:

a Tx fiber and an Rx fiber.

02317347

Switch Products, LE0M0GS4FF, Optical

Transceiver, eSFP, GE, Single-mode

Module (1550 nm, 40 km, LC)

Optional. Quotation is required.

1. This item is a GE optical module and has

independent transmit and receive channels. It is

used on combo optical interfaces of the

AC6005.

2. Each AC6005 can have at most two such

Huawei Access Controller AC6005 Ordering Guide Public

Part

Number

Part Description

Configuration Description

modules configured.

3. Each module has two optical fibers configured:

a Tx fiber and an Rx fiber.

02317348

Switch Products, LE0M0GS8FF, Optical

Transceiver, eSFP, GE, Single-mode

Module (1550 nm, 80 km, LC)

Optional. Quotation is required.

1. 1. This item is a GE optical module and has

independent transmit and receive channels. It is

used on combo optical interfaces of the

AC6005.

2. Each AC6005 can have at most two such

modules configured.

3. Each module has two optical fibers configured:

a Tx fiber and an Rx fiber.

02315206

Datacom Products, DP0M2ESFP,

Optical Transceiver, eSFP, GE, Single-

mode Module (1550 nm, 100 km, LC)

Optional. Quotation is required.

1. This item is a GE optical module and has

independent transmit and receive channels. It is

used on combo optical interfaces of the

AC6005.

2. Each AC6005 can have at most two such

modules configured.

3. Each module has two optical fibers configured:

a Tx fiber and an Rx fiber.

02310LPN

Transceiver, eSFP, 1471 nm, 100 M-2.67

Gbit/s, 5 dBm, 0 dBm, -28 dBm, LC, 80

Optional. Quotation is required.

1. This item is a GE optical module and has

independent transmit and receive channels. It is

used on combo optical interfaces of the

AC6005.

2. Each AC6005 can have at most two such

modules configured.

3. Each module has two optical fibers configured:

a Tx fiber and an Rx fiber.

02310LPK

Transceiver, eSFP, 1491 nm, 100M-2.67

Gbit/s, 5 dBm, 0 dBm, -28 dBm, LC, 80

Optional. Quotation is required.

1. This item is a GE optical module and has

independent transmit and receive channels. It is

used on combo optical interfaces of the

AC6005.

2. Each AC6005 can have at most two such

modules configured.

3. Each module has two optical fibers configured:

a Tx fiber and an Rx fiber.

02310LPH

Transceiver, eSFP, 1511 nm, 100 M-2.67

Gbit/s, 5 dBm, 0 dBm, -28 dBm, LC, 80

Optional. Quotation is required.

1. This item is a GE optical module and has

independent transmit and receive channels. It is

used on combo optical interfaces of the

AC6005.

Huawei Access Controller AC6005 Ordering Guide Public

Part

Number

Part Description

Configuration Description

2. Each AC6005 can have at most two such

modules configured.

3. Each module has two optical fibers configured:

a Tx fiber and an Rx fiber.

02310LPL

Transceiver, eSFP, 1531 nm, 100 M-2.67

Gbit/s, 5 dBm, 0 dBm, -28 dBm, LC, 80

Optional. Quotation is required.

1. This item is a GE optical module and has

independent transmit and receive channels. It is

used on combo optical interfaces of the

AC6005.

2. Each AC6005 can have at most two such

modules configured.

3. Each module has two optical fibers configured:

a Tx fiber and an Rx fiber.

02310LPG

Transceiver, eSFP, 1551 nm, 100 M-2.67

Gbit/s, 5 dBm, 0 dBm, -28 dBm, LC, 80

Optional. Quotation is required.

1. This item is a GE optical module and has

independent transmit and receive channels. It is

used on combo optical interfaces of the

AC6005.

2. Each AC6005 can have at most two such

modules configured.

3. Each module has two optical fibers configured:

a Tx fiber and an Rx fiber.

02310LNS

Transceiver, eSFP, 1571 nm, 100 M-2.67

Gbit/s, 5 dBm, 0 dBm, -28 dBm, LC, 80

Optional. Quotation is required.

1. This item is a GE optical module and has

independent transmit and receive channels. It is

used on combo optical interfaces of the

AC6005.

2. Each AC6005 can have at most two such

modules configured.

3. Each module has two optical fibers configured:

a Tx fiber and an Rx fiber.

02310LNT

Transceiver, eSFP, 1591 nm, 100 M-2.67

Gbit/s, 5 dBm, 0 dBm, -28 dBm, LC, 80

Optional. Quotation is required.

1. This item is a GE optical module and has

independent transmit and receive channels. It is

used on combo optical interfaces of the

AC6005.

2. Each AC6005 can have at most two such

modules configured.

3. Each module has two optical fibers configured:

a Tx fiber and an Rx fiber.

02310LPJ

Transceiver, eSFP, 1611 nm, 100 M-2.67

Gbit/s, 5 dBm, 0 dBm, -28 dBm, LC, 80

Optional. Quotation is required.

1. This item is a GE optical module and has

independent transmit and receive channels. It is

used on combo optical interfaces of the

Huawei Access Controller AC6005 Ordering Guide Public

Part

Number

Part Description

Configuration Description

AC6005.

2. Each AC6005 can have at most two such

modules configured.

3. Each module has two optical fibers configured:

a Tx fiber and an Rx fiber.

02230YGV

AC6005, FE/STM1-SFP Optical Transceiver

02315233

Datacom Products, DP0M5SFP, Optical

Transceiver, SFP, 100M/155 M,

Multimode Module (1310 nm, 2 km,

LC)

Optional. Quotation is required.

1. This item is a 100 Mbit/s optical module and

has independent transmit and receive channels.

It is used on combo optical interfaces of the

AC6005.

2. Each AC6005 can have at most four such

modules configured.

3. Each module has two optical fibers configured:

a Tx fiber and an Rx fiber.

02315205

Datacom Products, DP0M1ESFP,

Optical Transceiver, eSFP, 100 M/155

M, Single-mode Module (1310 nm, 15

km, LC)

Optional. Quotation is required.

1. This item is a 100 Mbit/s optical module and

has independent transmit and receive channels.

It is used on combo optical interfaces of the

AC6005.

2. Each AC6005 can have at most four such

modules configured.

3. Each module has two optical fibers configured:

a Tx fiber and an Rx fiber.

02317344

Switch Products, LE0M0FS4DD,

Optical Transceiver, eSFP, FE, Single-

mode Module (1310 nm, 40 km, LC)

Optional. Quotation is required.

1. This item is a 100 Mbit/s optical module and

has independent transmit and receive channels.

It is used on combo optical interfaces of the

AC6005.

2. Each AC6005 can have at most four such

modules configured.

3. Each module has two optical fibers configured:

a Tx fiber and an Rx fiber.

02317345

Switch Products, LE0M0FS8FF, Optical

Transceiver, eSFP, FE, Single-mode

Module (1550 nm, 80 km, LC)

Optional. Quotation is required.

1. This item is a 100 Mbit/s optical module and

has independent transmit and receive channels.

It is used on combo optical interfaces of the

AC6005.

2. Each AC6005 can have at most four such

modules configured.

3. Each module has two optical fibers configured:

a Tx fiber and an Rx fiber.

Huawei Access Controller AC6005 Ordering Guide Public

Part

Number

Part Description

Configuration Description

02230YGT

AC6005, BIDI-SFP Optical Transceiver

02315286

Datacom Products, DP0M7SFP, Optical

Transceiver, eSFP, GE, BIDI Single-

mode Module (TX1490/RX1310, 10 km,

LC)

Optional. Quotation is required.

1. This item is a GE optical module used on

combo optical interfaces of the AC6005.

2. It is a GE single-fiber bidirectional optical

module and must be used with 02315285.

3. Each AC6005 can have at most two such

modules configured.

4. Each optical module has one optical fiber

configured.

02315285

Datacom Products, DP0M6SFP, Optical

Transceiver, eSFP, GE, BIDI Single-

mode Module (TX1310/RX1490, 10 km,

LC)

Optional. Quotation is required.

1. This item is a GE optical module used on

combo optical interfaces of the AC6005.

2. It is a GE single-fiber bidirectional optical

module and must be used with 02315286.

3. Each AC6005 can have at most two such

modules configured.

4. Each optical module has one optical fiber

configured.

02315203

Datacom Products, DP0M3SFP, Optical

Transceiver, eSFP, FE, BIDI Single-

mode Module (TX1310/RX1550, 15 km,

LC)

Optional. Quotation is required.

1. This item is a 100 Mbit/s optical module used

on combo optical interfaces of the AC6005.

2. It is an FE single-fiber bidirectional optical

module and must be used with 02315202.

3. Each AC6005 can have at most two such

modules configured.

4. Each optical module has one optical fiber

configured.

02315202

Datacom Products, DP0M2SFP, Optical

Transceiver, eSFP, FE, BIDI Single-

mode Module (TX1550/RX1310, 15 km,

LC)

Optional. Quotation is required.

1. This item is a 100 Mbit/s optical module used

on combo optical interfaces of the AC6005.

2. It is an FE single-fiber bidirectional optical

module and must be used with 02315203.

3. Each AC6005 can have at most two such

modules configured.

4. Each optical module has one optical fiber

configured.

(2) Select optical fibers.

The optical fiber configuration principles are as follows:

Huawei Access Controller AC6005 Ordering Guide Public

1. If an optical module with independent transmit and receive channels is used, each optical

interface requires one Tx fiber and one Rx fiber of the same type. If a single-fiber

bidirectional optical module is used, each interface requires only one optical fiber.

2. Single-mode optical modules must be used with single-mode optical fibers, and multimode

optical modules must be used with multimode optical fibers. By default, no optical fiber is

delivered with the product.

Table 1-5 List of optical fibers

Part

Number

Part Description

Configuration Description

14130197

Patch Cord, FC/PC, LC/PC, Single-mode,

G.652D, 2 mm, 10 m

Optional. Quotation is required.

1. This item is a single-mode optical fiber and can

be used only with a single-mode optical module.

2. If an optical module with independent transmit

and receive channels is used on the optical

interface, each optical interface requires one Tx

fiber and one Rx fiber. If a single-fiber

bidirectional optical module is used, each

interface requires only one optical fiber.

14130222

Patch Cord, LC/PC-LC/PC, Multimode, 2

mm, 10 m

Optional. Quotation is required.

1. This item is a multimode optical fiber and can be

used only with a multimode optical module.

2. If an optical module with independent transmit

and receive channels is used on the optical

interface, each optical interface requires one Tx

fiber and one Rx fiber. If a single-fiber

bidirectional optical module is used, each

interface requires only one optical fiber.

14130295

Patch Cord, LC/PC-LC/PC, Multimode, 2

mm, 20 m

Optional. Quotation is required.

1. This item is a multimode optical fiber and can be

used only with a multimode optical module.

2. If an optical module with independent transmit

and receive channels is used on the optical

interface, each optical interface requires one Tx

fiber and one Rx fiber. If a single-fiber

bidirectional optical module is used, each

interface requires only one optical fiber.

14130199

Patch Cord, LC/PC-LC/PC, Single-mode,

G.652D, 2 mm, 10 m

Optional. Quotation is required.

1. This item is a single-mode optical fiber and can

be used only with a single-mode optical module.

2. If an optical module with independent transmit

and receive channels is used on the optical

interface, each optical interface requires one Tx

fiber and one Rx fiber. If a single-fiber

bidirectional optical module is used, each

interface requires only one optical fiber.

14130251

Patch Cord, LC/PC-LC/PC, Single-mode,

Optional. Quotation is required.

Huawei Access Controller AC6005 Ordering Guide Public

Part

Number

Part Description

Configuration Description

G.652D, 2 mm, 20 m

1. This item is a single-mode optical fiber and can

be used only with a single-mode optical module.

2. If an optical module with independent transmit

and receive channels is used on the optical

interface, each optical interface requires one Tx

fiber and one Rx fiber. If a single-fiber

bidirectional optical module is used, each

interface requires only one optical fiber.

14130223

Patch Cord, LC/PC-SC/PC, Multimode, 2

mm, 10 m

Optional. Quotation is required.

1. This item is a multimode optical fiber and can be

used only with a multimode optical module.

2. If an optical module with independent transmit

and receive channels is used on the optical

interface, each optical interface requires one Tx

fiber and one Rx fiber. If a single-fiber

bidirectional optical module is used, each

interface requires only one optical fiber.

14130279

Patch Cord, LC/PC, SC/PC, Multimode, 2

mm, 20 m

Optional. Quotation is required.

1. This item is a multimode optical fiber and can be

used only with a multimode optical module.

2. If an optical module with independent transmit

and receive channels is used on the optical

interface, each optical interface requires one Tx

fiber and one Rx fiber. If a single-fiber

bidirectional optical module is used, each

interface requires only one optical fiber.

14130196

Patch Cord, LC/PC-SC/PC, Single-mode,

G.652D, 2 mm, 10 m

Optional. Quotation is required.

1. This item is a single-mode optical fiber and can

be used only with a single-mode optical module.

2. If an optical module with independent transmit

and receive channels is used on the optical

interface, each optical interface requires one Tx

fiber and one Rx fiber. If a single-fiber

bidirectional optical module is used, each

interface requires only one optical fiber.

14130280

Patch Cord, LC/PC, SC/PC, Single-mode,

G.652D, 2 mm, 20 m

Optional. Quotation is required.

1. This item is a single-mode optical fiber and can

be used only with a single-mode optical module.

2. If an optical module with independent transmit

and receive channels is used on the optical

interface, each optical interface requires one Tx

fiber and one Rx fiber. If a single-fiber

bidirectional optical module is used, each

interface requires only one optical fiber.

14130276

Patch Cord, LC/PC, SC/PC, Single-mode,

Optional. Quotation is required.

Huawei Access Controller AC6005 Ordering Guide Public

Part

Number

Part Description

Configuration Description

G.652D, 2 mm, 30 m

1. This item is a single-mode optical fiber and can

be used only with a single-mode optical module.

2. If an optical module with independent transmit

and receive channels is used on the optical

interface, each optical interface requires one Tx

fiber and one Rx fiber. If a single-fiber

bidirectional optical module is used, each

interface requires only one optical fiber.

14130277

Patch Cord, FC/PC, LC/PC, Multimode, 2

mm, 30 m

Optional. Quotation is required.

1. This item is a multimode optical fiber and can be

used only with a multimode optical module.

2. If an optical module with independent transmit

and receive channels is used on the optical

interface, each optical interface requires one Tx

fiber and one Rx fiber. If a single-fiber

bidirectional optical module is used, each

interface requires only one optical fiber.

14130278

Patch Cord, FC/PC, LC/PC, Single-mode,

G.652D, 2 mm, 30 m

Optional. Quotation is required.

1. This item is a single-mode optical fiber and can

be used only with a single-mode optical module.

2. If an optical module with independent transmit

and receive channels is used on the optical

interface, each optical interface requires one Tx

fiber and one Rx fiber. If a single-fiber

bidirectional optical module is used, each

interface requires only one optical fiber.

14130282

Patch Cord, LC/PC, LC/PC, Single-mode,

G.652D, 2 mm, 30 m

Optional. Quotation is required.

1. This item is a single-mode optical fiber and can

be used only with a single-mode optical module.

2. If an optical module with independent transmit

and receive channels is used on the optical

interface, each optical interface requires one Tx

fiber and one Rx fiber. If a single-fiber

bidirectional optical module is used, each

interface requires only one optical fiber.

14130294

Patch Cord, LC/PC-LC/PC, Multimode, 2

mm, 30 m

Optional. Quotation is required.

1. This item is a multimode optical fiber and can be

used only with a multimode optical module.

2. If an optical module with independent transmit

and receive channels is used on the optical

interface, each optical interface requires one Tx

fiber and one Rx fiber. If a single-fiber

bidirectional optical module is used, each

interface requires only one optical fiber.

14130273

Patch Cord, FC/PC, LC/PC, Multimode, 2

Optional. Quotation is required.

Inhaltsverzeichnis

Andere Huawei IP-Zugriffskontrollsysteme Handbücher

Huawei

Huawei AC6605 Bedienungsanleitung

Beliebte IP-Zugriffskontrollsysteme Handbücher anderer Marken

ZKTeco

ZKTeco SpeedFace-V5L Bedienungsanleitung

Jantar

Jantar REX A-1-9 Bedienungsanleitung

2N Access Unit Merkblatt

Kedacom

Kedacom KSCA120 Series Bedienungsanleitung

H3C

H3C WX2880X Bedienungsanleitung

G4S

G4S S870-EX Leitfaden

PRASTEL

PRASTEL M2000PE Bedienungsanleitung

Allegion

Allegion interflex IF-281 Cylinder Bedienungsanleitung

TECOM

TECOM TS1067E Bedienungsanleitung

Fermax

Fermax Memokey 100C Benutzerhandbuch

Fermax

Fermax CITYLINE MEMOKEY Bedienungsanleitung

Software House

Software House iSTAR Pro 2U RM Bedienungsanleitung

AKCP

AKCP SP+ Bedienungsanleitung

Bpt

Bpt HNA/102 Bedienungsanleitung

Civintec

Civintec CV9601T-T-1F Bedienungsanleitung

BioMax

BioMax N-X90W Bedienungsanleitung

ZKTeco

ZKTeco OP-200 Bedienungsanleitung

FingerTec

FingerTec s-Kadex Bedienungsanleitung