Huawei LUNA2000-97KWH-1H1 Bedienungsanleitung

LUNA2000-(97KWH-1H1, 129KWH-2H1,

161KWH-2H1, 200KWH-2H1) Smart String ESS

Maintenance Manual

Issue 04

Date 2023-06-30

HUAWEI DIGITAL POWER TECHNOLOGIES CO., LTD.

No part of this document may be reproduced or transmitted in any form or by any means without prior

written consent of Huawei Digital Power Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are the property of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective

holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei

Digital Power Technologies Co., Ltd. and the customer. All or part of the products, services and features

described in this document may not be within the purchase scope or the usage scope. Unless otherwise

specied in the contract, all statements, information, and recommendations in this document are

provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every eort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Digital Power Technologies Co., Ltd.

Address: Huawei Digital Power Antuoshan Headquarters

Futian, Shenzhen 518043

People's Republic of China

Website: https://e.huawei.com

About This Document

Purpose

This document describes routine maintenance, troubleshooting, and parts

replacement of LUNA2000-97KWH-1H1, LUNA2000-129KWH-2H1,

LUNA2000-161KWH-2H1, and LUNA2000-200KWH-2H1 Smart String Energy

Storage Systems (also referred to as ESSs). Before maintaining the ESS, read this

document carefully to understand the safety information as well as functions and

features of the ESS.

Intended Audience

This document is intended for:

● Technical support engineers

● Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are dened as follows.

Symbol Description

Indicates a hazard with a high level of risk which,

if not avoided, will result in death or serious injury.

Indicates a hazard with a medium level of risk

which, if not avoided, could result in death or

serious injury.

Indicates a hazard with a low level of risk which, if

not avoided, could result in minor or moderate

injury.

LUNA2000-(97KWH-1H1, 129KWH-2H1,

161KWH-2H1, 200KWH-2H1) Smart String ESS

Maintenance Manual About This Document

Symbol Description

Indicates a potentially hazardous situation which,

if not avoided, could result in equipment damage,

data loss, performance deterioration, or

unanticipated results.

NOTICE is used to address practices not related to

personal injury.

Supplements the important information in the

main text.

NOTE is used to address information not related

to personal injury, equipment damage, and

environment deterioration.

Change History

Changes between document issues are cumulative. The latest document issue

contains all the changes made in earlier issues.

Issue 04 (2023-06-30)

Updated About This Document.

Issue 03 (2023-06-10)

Updated 4 Replacing a Battery Pack.

Added 7 Replacing a Smart PCS.

Added 8 Replacing a Smart Rack Controller.

Issue 02 (2023-02-28)

Updated 1 Safety Information.

Updated 4 Replacing a Battery Pack.

Updated 28 Emergency Handling.

Updated 29.3 Battery Pack Storage and Single Battery Pack Charge.

Issue 01 (2022-10-30)

This issue is used for rst oce application (FOA).

LUNA2000-(97KWH-1H1, 129KWH-2H1,

161KWH-2H1, 200KWH-2H1) Smart String ESS

Maintenance Manual About This Document

Contents

About This Document................................................................................................................ ii

1 Safety Information.................................................................................................................. 1

1.1 Personal Safety.........................................................................................................................................................................2

1.2 Electrical Safety........................................................................................................................................................................4

1.3 Environment Requirements................................................................................................................................................. 7

1.4 Mechanical Safety................................................................................................................................................................... 9

1.5 Equipment Safety..................................................................................................................................................................13

1.5.1 ESS Safety.............................................................................................................................................................................14

1.5.2 Battery Safety..................................................................................................................................................................... 14

2 Routine Maintenance........................................................................................................... 21

2.1 Preparations Before Maintenance................................................................................................................................... 21

2.2 Powering O a Single ESS................................................................................................................................................. 22

2.2.1 Sending a Shutdown Command on the SmartLogger..........................................................................................22

2.2.2 Power-O Process............................................................................................................................................................. 22

2.2.3 Power-O Operations......................................................................................................................................................23

2.2.4 Powering O the Power Supply Loop of the AC Power Distribution Cabinet............................................. 24

2.3 Routine Maintenance.......................................................................................................................................................... 24

2.3.1 Unscheduled Maintenance.............................................................................................................................................24

2.3.2 Quarterly Maintenance................................................................................................................................................... 24

2.3.3 Semi-annual Maintenance............................................................................................................................................. 26

2.3.4 Annual Maintenance........................................................................................................................................................ 27

3 Alarm Reference.................................................................................................................... 28

4 Replacing a Battery Pack.....................................................................................................29

5 Replacing a Battery Management Module..................................................................... 38

6 Replacing a Battery Pack Fan............................................................................................. 45

7 Replacing a Smart PCS.........................................................................................................46

8 Replacing a Smart Rack Controller...................................................................................47

9 Replacing a Rack Controller Fan....................................................................................... 59

10 Replacing an Air Conditioner........................................................................................... 65

LUNA2000-(97KWH-1H1, 129KWH-2H1,

161KWH-2H1, 200KWH-2H1) Smart String ESS

Maintenance Manual Contents

10.1 Replacing an Air Conditioner Internal Fan................................................................................................................ 65

10.2 Replacing an Air Conditioner External Fan................................................................................................................68

10.3 Replacing an Air Conditioner Main Control Board................................................................................................. 70

10.4 Replacing an Air Conditioner......................................................................................................................................... 74

11 Replacing a Light................................................................................................................ 78

12 Replacing a Fuse..................................................................................................................79

13 Replacing a Circuit Breaker.............................................................................................. 81

13.1 Replacing a DC Switch...................................................................................................................................................... 81

13.2 Replacing an AC Main Switch........................................................................................................................................ 84

13.3 Replacing a 220 V Socket Switch.................................................................................................................................. 85

13.4 Replacing a PSU Switch....................................................................................................................................................86

13.5 Replacing a UPS Switch....................................................................................................................................................87

13.6 Replacing a DC Power Distribution Switch................................................................................................................88

14 Replacing an SPD................................................................................................................ 89

15 Replacing an Emergency Stop Switch............................................................................91

16 Replacing an Embedded Power Subrack....................................................................... 93

17 Replacing a CMU Adapter.................................................................................................95

18 Replacing a CMU................................................................................................................. 97

19 Replacing a Door Status Sensor.................................................................................... 102

20 Replacing a Water Sensor...............................................................................................104

21 Replacing a T/H Sensor................................................................................................... 106

22 Replacing an Exhaust Controller...................................................................................108

23 Replacing a CO Sensor.....................................................................................................112

24 Replacing an Exhaust Fan............................................................................................... 114

25 Replacing an SMU11B......................................................................................................116

26 Replacing a Smoke Detector.......................................................................................... 118

27 Replacing an I/O Expansion Board............................................................................... 120

28 Emergency Handling........................................................................................................123

29 FAQ....................................................................................................................................... 126

29.1 How Do I Recycle Used Batteries?............................................................................................................................. 126

29.2 How Do I Repair Paint Damage?................................................................................................................................127

29.3 Battery Pack Storage and Single Battery Pack Charge....................................................................................... 131

29.4 How Can I Export Device Logs?.................................................................................................................................. 136

A Acronyms and Abbreviations........................................................................................... 137

LUNA2000-(97KWH-1H1, 129KWH-2H1,

161KWH-2H1, 200KWH-2H1) Smart String ESS

Maintenance Manual Contents

1 Safety Information

Statement

Before transporting, storing, installing, operating, using, and/or maintaining

the equipment, read this document, strictly follow the instructions provided

herein, and follow all the safety instructions on the equipment and in this

document. In this document, "equipment" refers to the products, software,

components, spare parts, and/or services related to this document; "the Company"

refers to the manufacturer (producer), seller, and/or service provider of the

equipment; "you" refers to the entity that transports, stores, installs, operates,

uses, and/or maintains the equipment.

The Danger, Warning, Caution, and Notice statements described in this

document do not cover all the safety precautions. You also need to comply with

relevant international, national, or regional standards and industry practices. The

Company shall not be liable for any consequences that may arise due to

violations of safety requirements or safety standards concerning the design,

production, and usage of the equipment.

The equipment shall be used in an environment that meets the design

specications. Otherwise, the equipment may be faulty, malfunctioning, or

damaged, which is not covered under the warranty. The Company shall not be

liable for any property loss, personal injury, or even death caused thereby.

Comply with applicable laws, regulations, standards, and specications during

transportation, storage, installation, operation, use, and maintenance.

Do not perform reverse engineering, decompilation, disassembly, adaptation,

implantation, or other derivative operations on the equipment software. Do not

study the internal implementation logic of the equipment, obtain the source code

of the equipment software, violate intellectual property rights, or disclose any of

the performance test results of the equipment software.

The Company shall not be liable for any of the following circumstances or

their consequences:

● The equipment is damaged due to force majeure such as earthquakes, oods,

volcanic eruptions, debris ows, lightning strikes, res, wars, armed conicts,

typhoons, hurricanes, tornadoes, and other extreme weather conditions.

● The equipment is operated beyond the conditions specied in this document.

LUNA2000-(97KWH-1H1, 129KWH-2H1,

161KWH-2H1, 200KWH-2H1) Smart String ESS

Maintenance Manual 1 Safety Information

● The equipment is installed or used in environments that do not comply with

international, national, or regional standards.

● The equipment is installed or used by unqualied personnel.

● You fail to follow the operation instructions and safety precautions on the

product and in the document.

● You remove or modify the product or modify the software code without

authorization.

● You or a third party authorized by you cause the equipment damage during

transportation.

● The equipment is damaged due to storage conditions that do not meet the

requirements specied in the product document.

● You fail to prepare materials and tools that comply with local laws,

regulations, and related standards.

● The equipment is damaged due to your or a third party's negligence,

intentional breach, gross negligence, or improper operations, or other reasons

not related to the Company.

1.1 Personal Safety

D ANGER

Ensure that power is o during installation. Do not install or remove a cable with

power on. Transient contact between the core of the cable and the conductor will

cause electric arcs, sparks, re, or explosion, which may result in personal injury.

D ANGER

Non-standard and improper operations on the energized equipment may cause

re, electric shocks, or explosion, resulting in property damage, personal injury, or

even death.

D ANGER

Before operations, remove conductive objects such as watches, bracelets, bangles,

rings, and necklaces to prevent electric shocks.

D ANGER

During operations, use dedicated insulated tools to prevent electric shocks or short

circuits. The dielectric withstanding voltage level must comply with local laws,

regulations, standards, and specications.

LUNA2000-(97KWH-1H1, 129KWH-2H1,

161KWH-2H1, 200KWH-2H1) Smart String ESS

Maintenance Manual 1 Safety Information

WARNING

During operations, wear personal protective equipment such as protective

clothing, insulated shoes, goggles, safety helmets, and insulated gloves.

General Requirements

● Do not stop protective devices. Pay attention to the warnings, cautions, and

related precautionary measures in this document and on the equipment.

● If there is a likelihood of personal injury or equipment damage during

operations, immediately stop, report the case to the supervisor, and take

feasible protective measures.

● Do not power on the equipment before it is installed or conrmed by

professionals.

● Do not touch the power supply equipment directly or with conductors such as

damp objects. Before touching any conductor surface or terminal, measure

the voltage at the contact point to ensure that there is no risk of electric

shock.

● Do not touch operating equipment because the enclosure is hot.

● Do not touch a running fan with your hands, components, screws, tools, or

boards. Otherwise, personal injury or equipment damage may occur.

● In the case of a re, immediately leave the building or the equipment area

and activate the re alarm or call emergency services. Do not enter the

aected building or equipment area under any circumstances.

Personnel Requirements

● Only professionals and trained personnel are allowed to operate the

equipment.

– Professionals: personnel who are familiar with the working principles and

structure of the equipment, trained or experienced in equipment

operations and are clear of the sources and degree of various potential

hazards in equipment installation, operation, maintenance

– Trained personnel: personnel who are trained in technology and safety,

have required experience, are aware of possible hazards on themselves in

certain operations, and are able to take protective measures to minimize

the hazards on themselves and other people

● Personnel who plan to install or maintain the equipment must receive

adequate training, be able to correctly perform all operations, and understand

all necessary safety precautions and local relevant standards.

● Only qualied professionals or trained personnel are allowed to install,

operate, and maintain the equipment.

● Only qualied professionals are allowed to remove safety facilities and inspect

the equipment.

● Personnel who will perform special tasks such as electrical operations,

working at heights, and operations of special equipment must possess the

required local qualications.

● Only certied high-voltage electricians are allowed to operate medium-

voltage equipment.

LUNA2000-(97KWH-1H1, 129KWH-2H1,

161KWH-2H1, 200KWH-2H1) Smart String ESS

Maintenance Manual 1 Safety Information

● Only authorized professionals are allowed to replace the equipment or

components (including software).

● Only personnel who need to work on the equipment are allowed to access

the equipment.

1.2 Electrical Safety

D ANGER

Before connecting cables, ensure that the equipment is intact. Otherwise, electric

shocks or re may occur.

D ANGER

Non-standard and improper operations may result in re or electric shocks.

D ANGER

Prevent foreign matter from entering the equipment during operations. Otherwise,

equipment damage, load power derating, power failure, or personal injury may

occur.

WARNING

For the equipment that needs to be grounded, install the ground cable rst when

installing the equipment and remove the ground cable last when removing the

equipment.

CA UTION

Do not route cables near the air intake or exhaust vents of the equipment.

General Requirements

● Follow the procedures described in the document for installation, operation,

and maintenance. Do not reconstruct or alter the equipment, add

components, or change the installation sequence without permission.

● Obtain approval from the national or local electric utility company before

connecting the equipment to the grid.

● Observe the power plant safety regulations, such as the operation and work

ticket mechanisms.

● Install temporary fences or warning ropes and hang "No Entry" signs around

the operation area to keep unauthorized personnel away from the area.

LUNA2000-(97KWH-1H1, 129KWH-2H1,

161KWH-2H1, 200KWH-2H1) Smart String ESS

Maintenance Manual 1 Safety Information

Andere Handbücher für LUNA2000-97KWH-1H1

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Huawei Netzwerk-Hardware Handbücher

Huawei

Huawei CR52-10GE Bedienungsanleitung

Huawei

Huawei RRU3804 Bedienungsanleitung

Huawei

Huawei VP9650 Technische Daten

Huawei

Huawei CR52-MPUA Bedienungsanleitung

Huawei

Huawei RTN510 Bedienungsanleitung

Huawei

Huawei OptiX RTN 600 ODU Bedienungsanleitung

Huawei

Huawei SmartLi 1.0 Bedienungsanleitung

Huawei

Huawei CR52K-10GE Bedienungsanleitung

Huawei

Huawei CR-P4CF Bedienungsanleitung

Huawei

Huawei iMaster NetEco V600R021C10 Bedienungsanleitung

Huawei

Huawei SmartAX MA5616 Bedienungsanleitung

Huawei

Huawei HW-TX-5000 Bedienungsanleitung

Huawei

Huawei FIC-1/2ADSL Bedienungsanleitung

Huawei

Huawei OptiXstar P813E Bedienungsanleitung

Huawei

Huawei NetCo 15000-C30 Leitfaden

Huawei

Huawei ViewPoint 8650 V100R008 Bedienungsanleitung

Huawei

Huawei NE-HIC-2xSTM1/POS-SFP Bedienungsanleitung

Huawei

Huawei EG8040F5 Bedienungsanleitung

Huawei

Huawei FusionModule1000A20 Bedienungsanleitung

Huawei

Huawei OptiXstar W616E-D Bedienungsanleitung

Huawei

Huawei HG8245W5 Bedienungsanleitung

Huawei

Huawei NE-FIC-CE3 Bedienungsanleitung

Huawei

Huawei TP48200A-HX09A1 Bedienungsanleitung

Huawei

Huawei RU3832 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung