Huawei OptiX OSN 9560 Bedienungsanleitung

HUAWEI TECHNOLOGIES CO., LTD.

OptiX OSN 9560 Intelligent Optical Transmission System

Quick Installation Guide

Issue: 02

Date: 2012-05-30

Huawei TechnologiesCo., Ltd. providescustomers with comprehensivetechnical support and service.

For any assistance, please contact our local officeor company headquarters.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian,Longgang

Shenzhen 518129

People's Republic of China

Website: http://www.huawei.com

Email: support@huawei.com

No part of this document may be reproduced or transmittedin any form or by any means without prior

written consent of Huawei TechnologiesCo., Ltd.

Trademarksand Permissions

and other Huawei trademarks are trademarks of Huawei TechnologiesCo., Ltd.

All other trademarks and trade names mentionedin this document are the property of their respective

holders.

Notice

The informationin this document is subject to change without notice. Everyefforthas been made in the

preparationof this document to ensure accuracy of the contents, but all statements, information,and

recommendationsin this documentdo not constitute the warranty of any kind, express or implied.

Huawei Technologies Proprietary

Installation Process

Before You Start PrecautionsPage 1

Start

Installing and Laying

Out Cables

Pages

11 to 36

Installing and Laying Out

Fibers

Pages

37 to 40

Checking the Installation

Pages

41 to 42

Checking Fiber

Attenuation

Page 42

End

Installing and Laying Out

Power Cables: DC Power

Distribution Box

Pages

12 to 13

Installing and Laying Out

Power Cables and

PGND Cables

Pages

18 to 19

Power Cable Connections

Between the Cabinet and

Subrack

Pages

14 to 17

Cabinet Power Ports and

Subrack Power Ports

Pages

21 to 23

Installing Ground Cables

for the Power Distribution

Box and Subracks

Page 20

Installing and Laying Out

External Alarm Cables

Pages

26 to 27

Installing and Laying Out

NMS Cables

Pages

24 to 25

Installing and Laying Out

Cabinet Indicator Cables

Pages

28 to 29

Installing CRPC

Plug-in Frames

Page 9

Installing Fiber

Management Trays

Page 10

Precautions About

Board Operations

Page 2

Installation ToolsPage 3

Introduction to the

OSN 9560 Equipment

Page 4

Installing Components

Pages

5 to 10

Installing Subracks

Pages 5 to 8

Cable Holes on the Top

and Bottom of the

N63E Cabinet

Page 11

Attaching Engineering Labels

Pages

43 to 44

Installing and Laying Out

CRPC Cables

Page 32

Installing and Laying Out

Clock Cables

Pages

30 to 31

Installing and Laying Out

E1 Cables

Pages

34 to 35

Installing and Laying Out

Cables in the Subrack

Interfacing Area

Page 33

Installing and Laying Out

F1 Serial Port Cables

Page 36

Precautions

This document provides a reference guide for hardware installation.

This document does not describe assembly of equipment prior to delivery; it only describes

procedures for onsite installation.

Electrostatic discharge

To prevent damage to sensitive components caused by electrostatic discharge, always wear ESD

gloves or an ESD wrist strap when handling the equipment, boards, or IC chips. Ensure that the ESD

wrist strap is properly grounded.

Binding cables

Bind fibers or cables inside a cabinet at intervals of not more than 250 mm and user cables at intervals of

not more than 200 mm.

Bind fibers, cables, or corrugated pipes outside a cabinet at intervals equal to the distance between two

horizontal beams. If the cable trough has no beams, the intervals should not exceed 250 mm.

Pre-installation check

Check the equipment room, cabinet, power supply, ground cables, optical cables, and surrounding

facilitiesprior to installation. Be sure that all engineering prerequisites have been met and use

procedures specified in the engineering design documents to complete the installation.

NOTE

CAUTION

Do not grasp boards with your bare hands. Wear ESD gloves or an ESD wrist strap when you handle boards.

Install filler panels in vacant slots on an NE. These filler panels prevent foreign objects from entering an NE.

Boards are fragile and valuable. Be careful when you place or move them. Pack boards that must be moved or

stored in dedicated packing boxes.

Holding boards with bare handsWearing ESD gloves Wearing ESD wrist straps

Grasp a board with both hands and ensure that you hold the front panel of the board. If you hold the other parts

of the board, board failures may occur.

Precautions About Board Operations

CAUTION

Installation Tools

Measuring tape Phillips screwdriver Flat-head screwdriver

Adjustable wrench Hot air gun Paper knife

Crimping tool Wire clippers Wire stripper

Cord end pliers Network cable tester Multimeter

COAX stripper RJ45 crimping tool Diagonal pliers

Exterior

Introduction to the OSN 9560 Equipment

Cable trough

Air filter net

Cable trough

Fan

Cable trough

Front view

Side view

b Oblique view

Subrack

interface area

Protection ground

(PGND) cable screw

ESD jack

Handle

mounting hole

Handle

Installing Components

•Front view of the cabinet

Component Mounting Hole Remarks

OSN 9560 4, 5, 11, 17, 24,

30, 37, 38

The fan assembly

and air filter net are

installed inside the

subrack.

Before laying out cables, remove the front door and side

panels of the cabinet. For details, see the N63E Cabinet

Installation Guide. To prevent injury or equipment damage,

two people should perform this operation. One holds the

subrack and the other tightens panel screws.

Fiber management

tray

OSN 3500 48, 50, 57, 59

74, 75

78,

Cable

distribution plate

DC power

distribution box

The fan assembly

and air filter net are

installed inside the

subrack.

•Mounting holes for subracks

Installing Subracks

Mounting holes for the OptiX OSN 9560 and OptiX OSN 3500

Before installing the OSN 9560 in the cabinet, remove the fan

assemblyand air filter net at the bottom of the subrack to

create some working space to complete the installation. After

the OSN 9560 has been installed, return the fan assembly and

air filter net to their places.

NOTE

Installing the OptiX OSN 3500 subrack

Cable distribution

plate

Cable

binding plate

Guide rail

Fiber management

tray

30±3 Kgf.cm

•Front view of the cabinet

Component Mounting Hole Remarks

OSN 9560 4, 5, 11, 17, 24,

30, 37, 38

The fan assembly

and air filter net are

installed inside the

subrack.

Before laying out cables, remove the front door and side

panels of the cabinet. For details, see the N63E Cabinet

InstallationGuide. To prevent injury or equipment damage,

two people should perform this operation. One holds the

subrack and the other tightens panel screws.

Fiber management

tray

OSN 7500 48, 50, 57, 59,

78,

DC power

distribution box

The fan assembly

and air filter net are

installed inside the

subrack.

•Mounting holes for subracks

Mounting holes for the OptiX OSN 9560 and OptiX OSN 7500

If an OptiX OSN 9560 and an OptiX OSN 7500 share one

cabinet, remove the cable distribution plate from the cabinet to

ensure that there is sufficient space for the OptiX OSN 7500.

Before installing the OSN 9560 in the cabinet, remove the fan

assemblyand air filter net at the bottom of the subrack to

create some working space to complete the installation. After

the OSN 9560 has been installed, return the fan assembly and

air filter net to their places.

NOTE

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Huawei Netzwerk-Hardware Handbücher

Huawei

Huawei NE-FIC-ATM-E3 Bedienungsanleitung

Huawei

Huawei IDS2000 Dual-Row Aisle Containment Bedienungsanleitung

Huawei

Huawei R209-Z Bedienungsanleitung

Huawei

Huawei iMaster NetEco V600R021C10 Bedienungsanleitung

Huawei

Huawei FusionModule2000 V500R003C10 Technische Daten

Huawei

Huawei FIC-1/2ADSL Bedienungsanleitung

Huawei

Huawei RRU3908 V2 Leitfaden

Huawei

Huawei NE-HIC-2xFE Bedienungsanleitung

Huawei

Huawei OptiXstar P612E Bedienungsanleitung

Huawei

Huawei RRU3203 Bedienungsanleitung

Huawei

Huawei VP9650 Technische Daten

Huawei

Huawei EchoLife HS8245W1 Bedienungsanleitung

Huawei

Huawei NIP6000E Bedienungsanleitung

Huawei

Huawei LSBM1P4G8B0 Bedienungsanleitung

Huawei

Huawei SUN600-5KTL-L0 Bedienungsanleitung

Huawei

Huawei SUN2000 Series Bedienungsanleitung

Huawei

Huawei RT-FIC-4SAE Bedienungsanleitung

Huawei

Huawei RT-1CPOS Bedienungsanleitung

Huawei

Huawei SmartAX MA5616 Bedienungsanleitung

Huawei

Huawei UPS2000-A-6KTTL Bedienungsanleitung

Huawei

Huawei RRU3942 Bedienungsanleitung

Huawei

Huawei RTN XMC ODU V200 Bedienungsanleitung

Huawei

Huawei Optix OSN 810 Bedienungsanleitung

Huawei

Huawei RRU3201 Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung