Huawei B593s-22 Bedienungsanleitung

Procedure

1. You should start by inserting the SIM card and then plug the power adapter to the B593 4G

router. The SIM card must be inserted on the right side when looking at the front of the

router. You can see the SIM card slot in the LTE CPE B593. The power plug must be inserted

behind the router.

2. Now you need to connect the router to your computer via the wireless network (WiFi). You

will find the router’s name and network code on the sticker behind the router.

WLAN –Name (SSID) is the router’s name and WLAN –Key (WPA/WPA2) is the router’s

wireless network password. When you first connect the router via WiFi, it would be necessary to

enter the WLAN key and get connected.

If you experience problems connecting to the router with the information on the back of the

router, this information may be changed. Press reset on the side of the router with a ball pen for

about 20 seconds and try again.

3. Once connected, open your Internet browser (e.g. Internet Explorer, Chrome or Safari) and in

the address bar type the routers address http://192.168.1.1 (or Homerouter.cpe). It’s the device

website on the label.

The default language is English, but you can choose your preferred language. The username

is admin and the password is admin (lowercase). You can also find both the router’s address

and password on the sticker behind the router.

4. The router will ask you to change the password when you login. You can ignore it. Your

router is already secured with the unique network code that you entered earlier in order to

connect to the router.

5. Now select Setup Wizard on the left menu.

You must validate your PIN to the SIM card. You will find PIN 1 on the frame (where you took

the SIM card out of the scrape area). Then click Validate. Tick Enable next to Save my

PIN and press Next.

Please note that the router stores the PIN code for the SIM card. Put one new SIM card in the

router at a time; enter the PIN code for the new SIM card in the same way.

But if you use the unlocked B593 Router, it’s unnecessary to do this. 4GLTEMALL.com is

selling the unlocked B593 Router.

6. You do not need to change anything in the next section called Internet.

The network mode is by default Auto and the Connection Mode is Always On. Please note that

'LTE Only'means '4G Only'and 'WCDMA only'means '3G only'in the Network mode. You

can try to isolate the signal to one of them if you wish. If you set it as Auto (recommended), the

router will always try to use 4G as a primary connection. Press Next.

7. You do not need to change anything in the next section called WLAN.

If you want to call your router something other than WLAN1-xxxx (its SSID), you need to

change. We do not recommend that you do and then you will always be able to find the router’s

name on the back of the router if you do not change it. Press Next.

8. We do not recommend that you change the following in the next point WLAN Security. The

Network code field is WPA with pre-shared key. This code is already unique and you should

only use it once when you connect to the router for the first time on your computer or your

mobile. You will also be able to find the network code on the back of the router if you ever need

it again later.

If you want to change it anyway, you must enter a code of minimum 8 characters and press Next.

Otherwise, press Next without changing the information below.

9. Now press Submit and your router will reboot and you will be on the internet.

10. Repeat point 2 for all devices to connect with the Internet.

Color Codes

Color Coding Mode on the front of the router the purple color means that the router lacks the

PIN. The blue color means that you are on 4G. The green color means that you are on 3G.

Firmware upgrade - Quick Guide for upgrade

1. Download the latest HUAWEI B593u-12 firmware upgrade.

2. Save the file to your desktop and unzip the file when you are finished.

3. Open your browser and log in to your router via 192.168.1.1 (username: admin;

password: admin - lower case).

4. Select System > Upgrade > select tar. > press Upgrade, then wait for few minutes, the

system will auto upgrade the firmware of the HUAWEI B593u-12.

These steps are also usable for HUAWEI B593s-22 and HUAWEI B593 other models. The

firmware may vary varies.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Huawei Netzwerk-Router Handbücher

Huawei

Huawei AR1200 Series Bedienungsanleitung

Huawei

Huawei WS8100 Bedienungsanleitung

Huawei

Huawei SmartAX MT880 Bedienungsanleitung

Huawei

Huawei AF23 Bedienungsanleitung

Huawei

Huawei V200R001 Bedienungsanleitung

Huawei

Huawei PTN Series Bedienungsanleitung

Huawei

Huawei LTE CPE B593 Bedienungsanleitung

Huawei

Huawei B612s-25d Technische Daten

Huawei

Huawei AR3200 Series Bedienungsanleitung

Huawei

Huawei Swisscom B593s Bedienungsanleitung

Huawei

Huawei SmartAX MT880 Bedienungsanleitung

Huawei

Huawei NE05E Bedienungsanleitung

Huawei

Huawei EchoLife HG8240 Bedienungsanleitung

Huawei

Huawei HG552f Bedienungsanleitung

Huawei

Huawei B535-232 Technische Daten

Huawei

Huawei B315 Series Bedienungsanleitung

Huawei

Huawei EchoLife HG8245 Bedienungsanleitung

Huawei

Huawei HG8010 series Bedienungsanleitung

Huawei

Huawei quidway s7700 Bedienungsanleitung

Huawei

Huawei B660 Bedienungsanleitung

Huawei

Huawei CX210 Kurzanleitung

Huawei

Huawei AR530 Series Bedienungsanleitung

Huawei

Huawei AR150/200 Series Bedienungsanleitung

Huawei

Huawei E5573 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise