Huawei Baudcom EG8145V5 Bedienungsanleitung

EG8145V5

Quick Start

Issue 03

Date 2020-02-26

HUAWEI TECHNOLOGIES CO., LTD.

Ordering Contact:

www.baudcom.com.cn

[email protected]

+862137709251

No part of this document may be reproduced or transmitted in any form or by any means without prior

written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective

holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and

the customer. All or part of the products, services and features described in this document may not be

within the purchase scope or the usage scope. Unless otherwise specied in the contract, all statements,

information, and recommendations in this document are provided "AS IS" without warranties, guarantees

or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every eort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: https://www.huawei.com

Email: [email protected]

Contents

1 Placing the Device................................................................................................................... 1

2 Connecting Cables................................................................................................................... 3

3 Indicator Description.............................................................................................................. 5

4 Technical Specications......................................................................................................... 7

5 FAQs............................................................................................................................................ 8

EG8145V5

Quick Start Contents

1 Placing the Device

● Do not install the ONT outdoors or in an outdoor cabinet.

● The ONT can be mounted onto a wall or placed on a desk. Do not install the ONT in

other modes, such as ceiling.

● Keep 10 cm clearance on all sides to ensure adequate ventilation.

● It is recommended that the computer and ONT be put far away from electric appliances

that generate strong magnetic or electric elds, such as microwave ovens.

Mounting an ONT on the desk

The gure below shows an ONT that is horizontally placed on a desk.

The appearance shown in this document may be dierent from the actual appearance of

the product. The actual product prevails.

Mounting an ONT onto a Wall

1. Mark two positions with the same spacing as that between the two mounting

holes of the ONT using a marker on a wall.

EG8145V5

Quick Start 1 Placing the Device

2. Select a proper drill bit according to the outer diameter of the screws. Use a

hammer drill to drill the marked positions on the wall. Then clean the holes

and install two expansion bolts.

3. Use a screwdriver to fasten the screws into the expansion bolts, reserving 3

mm ends out of the wall, and mount the ONT onto the screws.

It is recommended that the screw be about 4 mm in diameter and longer than 20 mm.

EG8145V5

Quick Start 1 Placing the Device

2 Connecting Cables

● The ber connector connected to the optical port on the wall varies depending on

actual conditions.

● To ensure normal use of bers, make sure that the ber bending radius is larger than 30

mm.

No. Item Description

1On/O Powers the ONT on or o.

2 Power Connects to a power adapter.

EG8145V5

Quick Start 2 Connecting Cables

No. Item Description

3 USB Connects to USB storage devices.

4 TEL Connects to the ports on a telephone or fax machine.

5 LAN1-LAN4 Connects to PCs or IP set-top boxes (STBs).

6 Optical port The optical port is equipped with a rubber plug and

connected to a ber for upstream transmission.

The type of the optical connector connected to the

optical port can be SC/APC.

7 WPS When the WLAN is on, press the WPS button (> 3s)

and release the button to start Wi-Fi protected setup

(WPS) negotiation.

8 Reset Press the button for a short time to reset the device,

or press the button for a long time (longer than 10s)

to restore the device to the default settings and reset

the device.

NOTE

Reset Huawei ONTs with caution. Otherwise, the ONTs may

fail to access the Internet. If an ONT cannot access the

Internet after a reset, contact your Internet service provider.

9 WLAN Used to enable or disable the WLAN function

● When the WLAN is disabled, press the WLAN

button (> 3s) and release the button to enable the

WLAN.

● When the WLAN is enabled, press the WLAN

button (> 3s) and release the button to disable the

WLAN.

EG8145V5

Quick Start 2 Connecting Cables

3 Indicator Description

Indicator Status Description

Power Steady on The ONT is powered on.

O The power supply is cut o.

PON/LOS See the following table.

LAN1-LAN4 Steady on The Ethernet connection is in the normal state.

Blinking Data is being transmitted over the Ethernet

port.

O The Ethernet connection is not set up.

TEL Steady on The ONT is registered with the softswitch but

no service ows are transmitted.

Blinks twice a

second

The ONT is registered with the softswitch, and

data is being transmitted on the port.

Blinks once

every 2 seconds

The ONT fails to be registered with the

softswitch.

O The POTS port is disabled.

USB Steady on The USB port is connected and working in the

host mode, but no data is transmitted.

Blinking Data is being transmitted on the USB port.

O The system is not powered on or the USB port

is not connected.

WLAN Steady on The WLAN function is enabled.

Blinking Data is being transmitted over the WLAN port.

EG8145V5

Quick Start 3 Indicator Description

Indicator Status Description

O The WLAN function is disabled.

WPS Steady on The WPS function is enabled.

Blinking A Wi-Fi terminal is accessing the system.

O The WPS function is disabled.

Status

No.

PON Status LOS Status Description

1O O The ONT is prohibited by the upper-layer

device or blinks abnormally. Contact the

service provider for help.

2 Blinks twice

a second

Blinks twice

a second

3 Blinks twice

a second

O The ONT attempts to set up a

connection with its upper-layer device.

4 Steady on O A connection is set up between the ONT

and its upper-layer device.

5O Blinks once

every 2

seconds

The ONT is not connected to bers or

does not receive optical signals.

6 Blinks once

every 2

seconds

Blinks once

every 2

seconds

The hardware is faulty.

EG8145V5

Quick Start 3 Indicator Description

4 Technical Specications

Product Function

EG8145V5 ● 4 Ethernet ports

● 1 POTS port

● 1 USB port

● 2.4 GHz & 5 GHz Wi-Fi

● Power adapter input: See the nameplate on the adapter.

● System power supply: See the nameplate on the device.

● Ambient temperature: 0ºC to +40ºC

● Ambient humidity: 5%–95% (non-condensing)

● Dimensions (H x W x D): 30 mm x 173 mm x 120 mm (without external

antenna and pads)

● Weight: About 250g

● Maximum system power consumption: 18 W

EG8145V5

Quick Start 4 Technical Specications

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Huawei Netzwerk-Router Handbücher

Huawei

Huawei H112 Bedienungsanleitung

Huawei

Huawei Flybox 4G Bedienungsanleitung

Huawei

Huawei E5576-320 Bedienungsanleitung

Huawei

Huawei Quidway S6502 Bedienungsanleitung

Huawei

Huawei AR2200 Series Bedienungsanleitung

Huawei

Huawei B310 LTE CPE Bedienungsanleitung

Huawei

Huawei DG8045-50 Bedienungsanleitung

Huawei

Huawei B818-260 Bedienungsanleitung

Huawei

Huawei NT3BB-4PVWN-147 Bedienungsanleitung

Huawei

Huawei HG531s Bedienungsanleitung

Huawei

Huawei HG8010 series Bedienungsanleitung

Huawei

Huawei NetEngine5000E Bedienungsanleitung

Huawei

Huawei RRU3808 Bedienungsanleitung

Huawei

Huawei Quidway S9300 Bedienungsanleitung

Huawei

Huawei S Series Kurzanleitung

Huawei

Huawei HG532D Bedienungsanleitung

Huawei

Huawei E5373s-155 Bedienungsanleitung

Huawei

Huawei B535-333 Bedienungsanleitung

Huawei

Huawei SmartAX MT800 Bedienungsanleitung

Huawei

Huawei Quidway AR-19-61 Bedienungsanleitung

Huawei

Huawei Wi-Fi WALKER WiMAX 2+ HWD15 Kurzanleitung

Huawei

Huawei V200R001 Bedienungsanleitung

Huawei

Huawei AR100 Series Bedienungsanleitung

Huawei

Huawei S3700 Series Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise