Huawei OptiXstar EG8010Hv6-10 Bedienungsanleitung

Huawei OptiXstar EG8010Hv6-10

Quick Start for QR code

Issue 02

Date 2022-11-02

HUAWEI TECHNOLOGIES CO., LTD.

No part of this document may be reproduced or transmitted in any form or by any means without prior

written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective

holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and

the customer. All or part of the products, services and features described in this document may not be

within the purchase scope or the usage scope. Unless otherwise specied in the contract, all statements,

information, and recommendations in this document are provided "AS IS" without warranties, guarantees

or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every eort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address: Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website: https://www.huawei.com

Email: [email protected]

Contents

1 Placing the Device................................................................................................................... 1

2 Connecting Cables................................................................................................................... 3

3 Indicator Description.............................................................................................................. 5

4 Technical Specications......................................................................................................... 7

5 FAQs............................................................................................................................................ 8

Huawei OptiXstar EG8010Hv6-10

Quick Start for QR code Contents

1 Placing the Device

NO TE

● Do not install the ONT outdoors or in an outdoor cabinet.

● The ONT can be mounted onto a wall or placed on a desk. Do not install the ONT in

other modes, such as ceiling.

● Keep 10 cm clearance on all sides to ensure adequate ventilation.

● It is recommended that the computer and ONT be put far away from electric appliances

that generate strong magnetic or electric elds, such as microwave ovens.

Mounting an ONT on the Desk

The gure below shows an ONT that is horizontally placed on a desk.

NO TE

The appearance shown in this document may be dierent from the actual appearance of

the product. The actual product prevails.

Huawei OptiXstar EG8010Hv6-10

Quick Start for QR code 1 Placing the Device

Mounting an ONT onto a Wall

1. Mark two positions with the same spacing as that between the two mounting

holes of the ONT using a marker on a wall.

2. Select a proper drill bit according to the outer diameter of the screws. Use a

hammer drill to drill the marked positions on the wall. Then clean the holes

and install two expansion bolts.

3. Use a screwdriver to fasten the screws into the expansion bolts, reserving 3

mm ends out of the wall, and mount the ONT onto the screws.

NO TE

It is recommended that the screw be about 4 mm in diameter and longer than 20 mm. The

screw head should be between 6mm and 9mm in diameter.

Huawei OptiXstar EG8010Hv6-10

Quick Start for QR code 1 Placing the Device

2 Connecting Cables

NO TE

● The ber connector connected to the optical port on the wall varies depending on

actual conditions.

● To ensure normal use of bers, make sure that the ber bending radius is larger than 30

mm.

No. Item Description

1 ON/OFF Powers the ONT on or o.

2 POWER Connects to a power adapter.

3 LAN Connects to PCs or IP set-top boxes (STBs).

Huawei OptiXstar EG8010Hv6-10

Quick Start for QR code 2 Connecting Cables

No. Item Description

4 OPTICAL The optical port is equipped with a rubber plug and

connected to a ber for upstream transmission.

The type of the optical connector connected to the

optical port can be SC/APC.

5 Reset Press the button for a short time to reset the device,

or press the button for a long time (longer than 10s)

to restore the device to the default settings and

reset the device.

NOTE

Reset Huawei ONTs with caution. Otherwise, the ONTs

may fail to access the Internet. If an ONT cannot access

the Internet after a reset, contact your Internet service

provider.

Huawei OptiXstar EG8010Hv6-10

Quick Start for QR code 2 Connecting Cables

3 Indicator Description

Indicator Status Description

POWER Steady on The ONT is powered on.

O The power supply is cut o.

PON/LOS See the following table.

LAN Steady on The Ethernet connection is in the normal

state.

Blinking Data is being transmitted over the

Ethernet port.

O The Ethernet connection is not set up.

Status No. PON Status LOS Status Description

1O O The ONT is prohibited by the

upper-layer device or blinks

abnormally. Contact the

service provider for help.

2 Blinks twice a

second

Blinks twice a

second

3 Blinks twice a

second

O The ONT attempts to set up

a connection with its upper-

layer device.

4 Steady on O A connection is set up

between the ONT and its

upper-layer device.

Huawei OptiXstar EG8010Hv6-10

Quick Start for QR code 3 Indicator Description

Status No. PON Status LOS Status Description

5O Blinks once

every 2

seconds

The ONT is not connected to

bers or does not receive

optical signals.

6 Blinks once

every 2

seconds

Blinks once

every 2

seconds

The hardware is faulty.

NO TE

If the ONT is not powered on or the power switch is turned o, all indicators are o.

Huawei OptiXstar EG8010Hv6-10

Quick Start for QR code 3 Indicator Description

4 Technical Specications

Product Function

Huawei OptiXstar

EG8010Hv6-10

1 Ethernet port

● Power adapter input: See the nameplate on the adapter.

● System power supply: See the nameplate on the device.

● Ambient temperature: 0ºC to +40ºC

● Ambient humidity: 5%–95% (non-condensing)

● Dimensions (H x W x D): 26 mm x 69 mm x 83 mm

● Weight: About 80g

● Maximum system power consumption: 2.1 W

Huawei OptiXstar EG8010Hv6-10

Quick Start for QR code 4 Technical Specications

Inhaltsverzeichnis

Andere Huawei Netzwerk-Router Handbücher

Huawei

Huawei AR1200 Series Stücklistenhandbuch

Huawei

Huawei Quidway S9300 Bedienungsanleitung

Huawei

Huawei NE05E Montageanleitung

Huawei

Huawei E5186 Bedienungsanleitung

Huawei

Huawei DG8045-50 Bedienungsanleitung

Huawei

Huawei Enterprise S2700 Series Bedienungsanleitung

Huawei

Huawei B535-333 Bedienungsanleitung

Huawei

Huawei AR1200 Series Leitfaden

Huawei

Huawei H122-373 Bedienungsanleitung

Huawei

Huawei B593u-501 Bedienungsanleitung

Huawei

Huawei EG8143A5 Bedienungsanleitung

Huawei

Huawei AR1200 Series Bedienungsanleitung

Huawei

Huawei AR100 Series Bedienungsanleitung

Huawei

Huawei WS7200 Bedienungsanleitung

Huawei

Huawei WS5200 Technische Daten

Huawei

Huawei ATN 910C-K Bedienungsanleitung

Huawei

Huawei Quidway S6502 Bedienungsanleitung

Huawei

Huawei Quidway R2600 Series Bedienungsanleitung

Huawei

Huawei SUN2000-25KTL-M5 Bedienungsanleitung

Huawei

Huawei B681-54 Bedienungsanleitung

Huawei

Huawei E5373s-155 Bedienungsanleitung

Huawei

Huawei 31010GAS Bedienungsanleitung

Huawei

Huawei Quidway S9300 Bedienungsanleitung

Huawei

Huawei V200R001 Technische Daten

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise