Huawei FusionModule1000A40 ICT Solution Bedienungsanleitung

FusionModule1000A40 Prefabricated All-in-One

Data Center

V200R003C10

Installation Guide

Issue 07

Date 2022-12-15

HUAWEI DIGITAL POWER TECHNOLOGIES CO., LTD.

No part of this document may be reproduced or transmitted in any form or by any means without prior

written consent of Huawei Digital Power Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are the property of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective

holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei

Digital Power Technologies Co., Ltd. and the customer. All or part of the products, services and features

described in this document may not be within the purchase scope or the usage scope. Unless otherwise

specied in the contract, all statements, information, and recommendations in this document are

provided "AS IS" without warranties, guarantees or representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every eort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Digital Power Technologies Co., Ltd.

Address: Huawei Digital Power Antuoshan Headquarters

Futian,Shenzhen 518043

People's Republic of China

Website: https://e.huawei.com

About This Document

Purpose

This document describes the site requirements for installing the

FusionModule1000A prefabricated all-in-one data center (FusionModule1000A for

short) as well as the methods and skills required for installing pre-fab. modules,

pipes, and cables, providing installation guidance and technical support for onsite

installation personnel and technical support engineers.

Intended Audience

This document is intended for:

● Hardware installation engineers

● Technical support engineers

● Commissioning engineers

● Maintenance engineers

Symbol Conventions

The symbols that may be found in this document are dened as follows.

Change History

Symbol Description

Indicates a hazard with a high level of risk which, if not

avoided, will result in death or serious injury.

Indicates a hazard with a medium level of risk which, if

not avoided, could result in death or serious injury.

Indicates a hazard with a low level of risk which, if not

avoided, could result in minor or moderate injury.

FusionModule1000A40 Prefabricated All-in-One

Data Center

Installation Guide About This Document

Symbol Description

Indicates a potentially hazardous situation which, if not

avoided, could result in equipment damage, data loss,

performance deterioration, or unanticipated results.

NOTICE is used to address practices not related to

personal injury.

Supplements the important information in the main

text.

NOTE is used to address information not related to

personal injury, equipment damage, and environment

deterioration.

Changes between document issues are cumulative. The latest document issue

contains all the changes made in earlier issues.

Issue 07 (2022-12-15)

This issue is the seventh ocial release.

● Optimized the content description.

● Updated 1 Safety Information.

Issue 06 (2021-02-10)

This issue is the sixth ocial release.

● Optimized the content description.

● Optimized the gure display.

Issue 05 (2020-11-30)

This issue is the fth ocial release.

● Deleted the description about battery pack installation.

Issue 04 (2020-10-30)

This issue is the fourth ocial release.

● Optimized the content description.

● Optimized the gure display.

Issue 03 (2020-06-09)

This issue is the third ocial release.

● Updated the re extinguishing devices.

FusionModule1000A40 Prefabricated All-in-One

Data Center

Installation Guide About This Document

Issue 02 (2020-01-15)

This issue is the second ocial release.

● Updated the layout diagrams of the concrete platform scenario and base

installation scenario.

Issue 01 (2019-07-15)

This issue is the rst ocial release.

FusionModule1000A40 Prefabricated All-in-One

Data Center

Installation Guide About This Document

Contents

About This Document................................................................................................................ ii

1 Safety Information.................................................................................................................. 1

1.1 Personal Safety.........................................................................................................................................................................2

1.2 Electrical Safety........................................................................................................................................................................4

1.3 Environmental Requirements.............................................................................................................................................. 8

1.4 Mechanical Safety.................................................................................................................................................................10

1.5 Equipment Safety..................................................................................................................................................................15

1.5.1 Cooling System Safety..................................................................................................................................................... 16

1.5.2 Battery Safety..................................................................................................................................................................... 16

2 Installation Guide Usage..................................................................................................... 23

3 Site Requirements................................................................................................................. 24

3.1 Site Selection Requirements..............................................................................................................................................24

3.2 Field Requirements...............................................................................................................................................................24

3.2.1 (Optional) Concrete Platform Scenario..................................................................................................................... 25

3.2.2 (Optional) Base Installation Scenario........................................................................................................................ 25

3.3 Power Supply and Distribution Requirements............................................................................................................ 27

3.4 Grounding Requirements................................................................................................................................................... 27

3.5 Water Rell and Drainage Requirements.....................................................................................................................28

3.5.1 Water Rell Requirements............................................................................................................................................. 28

3.5.2 Drainage Requirements................................................................................................................................................... 29

3.5.3 Pipe Anti-freezing.............................................................................................................................................................. 29

3.6 External Environment Requirements..............................................................................................................................31

4 Installation Preparations..................................................................................................... 32

4.1 Tools and Materials.............................................................................................................................................................. 32

4.2 Installation Personnel Requirements............................................................................................................................. 38

4.3 Checking the Installation Environment......................................................................................................................... 38

5 Installing Pre-fab. Modules.................................................................................................39

5.1 (Optional) Concrete Platform Scenario........................................................................................................................ 39

5.1.1 Determining the Pre-fab. Module Installation Position....................................................................................... 39

5.1.2 Removing the Pre-fab. Module Protective Cover................................................................................................... 40

5.1.3 Hoisting Pre-fab. Modules.............................................................................................................................................. 41

FusionModule1000A40 Prefabricated All-in-One

Data Center

Installation Guide Contents

5.2 (Optional) Mounting Base Scenario.............................................................................................................................. 45

5.2.1 Determining the Pre-fab. Module Installation Position....................................................................................... 46

5.2.2 Removing the Pre-fab. Module Protective Cover................................................................................................... 50

5.2.3 Hoisting and Securing Pre-fab. Modules...................................................................................................................51

5.3 Grounding Pre-fab. Modules............................................................................................................................................. 53

6 Installing External Accessories for Pre-fab. Modules....................................................56

6.1 (Optional) Installing External Cable Trays................................................................................................................... 56

6.2 (Optional) Installing a Rain and Snow Cover............................................................................................................. 58

6.3 (Optional) Installing Step Ladders..................................................................................................................................62

7 Installing External Pipes for Smart Cooling Products.................................................. 65

8 Removing Transport Protection Materials...................................................................... 68

8.1 Removing Transport Protection Materials for Smart Cooling Products............................................................. 68

8.2 Removing the Cabinet Sliding Base Fasteners............................................................................................................ 71

8.3 Removing Sliding Door Fasteners................................................................................................................................... 72

9 Installing Devices Inside Pre-fab. Modules..................................................................... 75

9.1 Installing Power Supply and Distribution Devices..................................................................................................... 75

9.1.1 (Optional) Installing Battery Packs............................................................................................................................. 75

9.1.2 Installing Batteries............................................................................................................................................................ 77

9.2 (Optional) Installing the Electric Heating Belt........................................................................................................... 78

9.3 Installing Monitoring Devices........................................................................................................................................... 80

9.3.1 (Optional) Installing ECC800 Accessories................................................................................................................. 80

9.3.2 (Optional) Installing a PAD........................................................................................................................................... 85

9.4 Installing Fire Extinguishing Devices.............................................................................................................................. 86

9.4.1 Installing CE-Certied Fire Extinguishing Devices..................................................................................................86

9.4.1.1 (Optional) Installing the Fire Extinguisher Cylinder.......................................................................................... 86

9.4.1.2 Connecting the Cable to the Battery of the Fire Control Panel.....................................................................89

9.4.2 Installing Standard Fire Extinguishing Devices....................................................................................................... 90

9.4.2.1 (Optional) Installing the Fire Extinguisher Cylinder.......................................................................................... 90

9.4.2.2 Connecting the Cables to Fire Alarm Control Panel Batteries....................................................................... 95

9.4.3 (Optional) Connecting a Cable to the ASD Power Box Battery........................................................................ 96

10 Installing Cables Outside Pre-fab. Modules................................................................. 98

10.1 Connecting Input Power Cables for Pre-fab. Modules...........................................................................................98

10.2 (Optional) Connecting Generator Start/Stop Cables (ATS Input).................................................................. 100

11 Removing Transport Protection Materials from Fire Extinguishing and

Monitoring Devices................................................................................................................ 102

12 Installation Verication.................................................................................................. 105

A Basic Installation Operations...........................................................................................107

A.1 Cable Installation Techniques........................................................................................................................................ 107

A.1.1 Cabling Rules....................................................................................................................................................................107

FusionModule1000A40 Prefabricated All-in-One

Data Center

Installation Guide Contents

A.1.2 Measuring Cables........................................................................................................................................................... 108

A.1.3 Laying Out Cables.......................................................................................................................................................... 109

A.1.4 Routing Cables Through a Plastic-coated Metal Hose...................................................................................... 110

A.1.5 Mounting Cables on the Cable Tray.........................................................................................................................111

A.1.6 Routing Cables into Feeder Windows......................................................................................................................113

A.1.6.1 Installing DPJ End Connectors................................................................................................................................ 113

A.1.6.2 Installing Waterproof Metal Connectors.............................................................................................................116

A.1.7 Attaching Cable Labels................................................................................................................................................. 118

A.2 Preparing Cable Terminals.............................................................................................................................................. 119

B Repairing the Pre-fab. Module........................................................................................ 121

C Dimensions of External Cable Trays and Fixed Ladders............................................ 123

D Cleaning Pre-fab. Modules............................................................................................... 125

E Acronyms and Abbreviations............................................................................................126

FusionModule1000A40 Prefabricated All-in-One

Data Center

Installation Guide Contents

1 Safety Information

Statement

Before transporting, storing, installing, operating, using, or maintaining the

equipment, read this document, strictly follow the instructions provided herein,

and follow all the safety instructions on the equipment and in this document. In

this document, "equipment" refers to the products, software, components, spare

parts, and/or services related to this document; "the Company" refers to the

manufacturer (producer), seller, and/or service provider of the equipment; "you"

refers to the entity that transports, stores, installs, operates, uses, and/or

maintains the equipment.

The Danger, Warning, Caution, and Notice statements described in this

document do not cover all the safety precautions. You also need to comply with

relevant international, national, or regional standards and industry practices. The

Company shall not be liable for any consequences that may arise due to

violations of safety requirements or safety standards concerning the design,

production, and usage of the equipment.

The equipment should be used in an environment that meets the design

specications. Otherwise, the equipment may be faulty, malfunctioning, or

damaged, which is not covered under the warranty. The Company shall not be

liable for any property loss, personal injury, or even death caused thereby.

Comply with applicable laws, regulations, standards, and specications during

transportation, storage, installation, operation, use, and maintenance.

Do not perform reverse engineering, decompilation, disassembly, adaptation,

implantation, or other derivative operations on the equipment software. Do not

study the internal implementation logic of the equipment, obtain the source code

of the equipment software, violate intellectual property rights, or disclose any of

the performance test results of the equipment software.

The Company shall not be liable for any of the following circumstances or

their consequences:

● Equipment damage due to force majeure such as earthquakes, oods,

volcanic eruptions, debris ows, lightning strikes, res, wars, armed conicts,

typhoons, hurricanes, tornadoes, and extreme weather conditions

● Operation beyond the conditions specied in this document

FusionModule1000A40 Prefabricated All-in-One

Data Center

Installation Guide 1 Safety Information

● Installation or use in environments that do not comply with international,

national, or regional standards

● Failure to follow the operation instructions and safety precautions on the

product and in the document

● Unauthorized modications to the product or software code or removal of the

product

● Damage caused during transportation by you or a third party authorized by

you

● Storage conditions that do not meet the requirements specied in the product

document

● Failure to comply with local laws, regulations, or related standards due to the

materials and tools prepared by you

● Damage caused by your or a third party's negligence, intentional breach,

gross negligence, or improper operations or damage not caused by the

Company

1.1 Personal Safety

D ANGER

Do not work with power on during installation. Do not install or remove a cable

with power on. Transient contact between the core of the cable and the conductor

will generate electric arcs or sparks, which may cause a re or personal injury.

D ANGER

Non-standard and improper operations on the energized equipment may cause

re or electric shocks, resulting in property damage, personal injury, or even death.

D ANGER

Before operations, remove conductive objects such as watches, bracelets, bangles,

rings, and necklaces to prevent electric shocks.

D ANGER

During operations, use dedicated insulated tools to prevent electric shocks or short

circuits. The insulation and voltage resistance must comply with local laws,

regulations, standards, and specications.

FusionModule1000A40 Prefabricated All-in-One

Data Center

Installation Guide 1 Safety Information

Andere Handbücher für FusionModule1000A40 ICT Solution

Inhaltsverzeichnis

Andere Huawei Lagerung Handbücher

Huawei

Huawei SmartLi-80Ah Bedienungsanleitung

Huawei

Huawei FusionDC1000B Bedienungsanleitung

Huawei

Huawei E600 Bedienungsanleitung

Huawei

Huawei OceanStor V3 Series Bedienungsanleitung

Huawei

Huawei FusionModule1000A Bedienungsanleitung

Huawei

Huawei E880 Bedienungsanleitung

Huawei

Huawei OceanStor Dorado5100 Bedienungsanleitung

Huawei

Huawei OceanStor V3 Series Bedienungsanleitung

Huawei

Huawei OceanStor 2600 V3 Video Surveillance Edition Technische Daten

Huawei

Huawei ES3000 V5 Bedienungsanleitung

Huawei

Huawei OceanStor Dorado V3 Series Gebrauchs- und Pflegehandbuch

Huawei

Huawei FusionModule2000 V500R003C10 Bedienungsanleitung

Huawei

Huawei LUNA2000-200KWH-2H1 Smart String ESS Bedienungsanleitung

Huawei

Huawei S10-10X Bedienungsanleitung

Huawei

Huawei EG602 Bedienungsanleitung

Huawei

Huawei FusionDC1000A Betriebsanleitung

Huawei

Huawei OceanStor HVS85T Bedienungsanleitung

Huawei

Huawei E182E HSPA+ Bedienungsanleitung

Huawei

Huawei Quidway S5000 Series Gebrauchsanweisung

Huawei

Huawei OceanStor T Series Bedienungsanleitung

Huawei

Huawei FusionModule500 Bedienungsanleitung

Huawei

Huawei FusionDC1000A Bedienungsanleitung

Huawei

Huawei FusionModule5000 Betriebsanleitung

Huawei

Huawei N2000H V3 Bedienungsanleitung

Beliebte Lagerung Handbücher anderer Marken

QNAP

QNAP TS 32PXU Series Bedienungsanleitung

LaCie

LaCie RUGGED RAID Bedienungsanleitung

Freecom

Freecom CLS DOCK Bedienungsanleitung

PNY

PNY Attache P-FD64MBATT3 Bedienungsanleitung

HP StorageWorks MSL2024 Bedienungsanleitung

OLT

OLT 6x6 Maximizer Bedienungsanleitung

Transcend

Transcend JetFlash 160 Bedienungsanleitung

LaCie

LaCie RUGGED MINI Bedienungsanleitung

Thunderbolt

Thunderbolt 600 Bedienungsanleitung

Panasonic

Panasonic LB-DH8 series Handbuch

Intel

Intel RAID High Availability Bedienungsanleitung

LaCie

LaCie 12big Thunderbolt 3 Bedienungsanleitung

Spectra Logic

Spectra Logic T-Series Spectra T50e Bedienungsanleitung

Panasonic

Panasonic LKM-F931-1 Bedienungsanleitung

Tabernus

Tabernus Enterprise Erase E2400 Bedienungsanleitung

Rocstor

Rocstor COMMANDER 3F series Bedienungsanleitung

HP P9000 Bedienungsanleitung

Western Digital

Western Digital Ultrastar Data60 Bedienungsanleitung