Huawei MIL-B19 Bedienungsanleitung
1
1. Charging
Line up the charger with the charging area on the back of the device, then connect the cable to a power
supply and wait for the battery level to appear on the screen.
Up button
Press and hold the
up button to power
on, power o, or
restart the watch.
Down button
Heart rate sensor
Charging port
Make sure that the device and its accessories stay clean and dry.
Speaker
Microphone
Quick Start Guide
2. Downloading Huawei Health
To download and install the Huawei Health app, scan the QR code on the right, or search for
Huawei Health in AppGallery or other app stores.
严禁外传
仅供莱茵公司使用
华为信息资产
2
Copyright © Huawei 2021. All rights reserved.
THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY KIND
OF WARRANTIES.
Trademarks and Permissions
The Bluetooth®word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use
of such marks by Huawei Technologies Co., Ltd. is under license. Huawei Device Co., Ltd. is an aliate of
Huawei Technologies Co., Ltd.
Other trademarks, product, service and company names mentioned may be the property of their respective
owners.
Privacy Policy
To better understand how we protect your personal information, please see the privacy policy at
https://consumer.huawei.com/privacy-policy.
Blasting Caps and Areas
Turn o your mobile phone or wireless device when in a blasting area or in areas posted turn o "two-way
radios" or "electronic devices" to avoid interfering with blasting operations.
3. Pairing your device with your phone
From the device list in the Huawei Health app, select the device and follow the onscreen instructions to complete
the pairing.
4. Getting help
View the online help in the Huawei Health app for more information about connection and functions, as well as
usage tips.
严禁外传
仅供莱茵公司使用
华为信息资产
3
Petrol stations and explosive atmospheres
In locations with potentially explosive atmospheres, obey all posted signs to turn o wireless devices such
as your phone or other radio equipment. Areas with potentially explosive atmospheres include fuelling areas,
below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals
or particles, such as grain, dust, or metal powders.
Operation and safety
• Using an unapproved or incompatible power adapter, charger or battery may cause re, explosion or
other hazards.
• Ideal temperatures are -20°C to +45°C.
• Avoid placing metal objects on the surface of the wireless charging cradle, as they could cause the
equipment to heat up and malfunction. Only use the wireless charging cradle in environments with an
ambient temperature ranging from 0°C to 45°C.
• If the ambient temperature is too high, the wireless charger may stop working. If this occurs, you are
advised to stop wireless charging.
• To keep the wireless charger in good condition, avoid using it inside a vehicle.
• Adult supervision is advised if children are to use or come into contact with this product.
• Please consult your doctor and the device manufacturer to determine if operation of your device may
interfere with the operation of your medical device.
• Switch o your wireless device when requested to do so in hospitals, clinics or health care facilities.
These requests are designed to prevent possible interference with sensitive medical equipment.
• Some wireless devices may aect the performance of hearing aids or pacemakers. Consult your service
provider for more information.
严禁外传
仅供莱茵公司使用
华为信息资产
4
• Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a
device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold
the device on the side opposite the pacemaker and do not carry the device in your front pocket.
• Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in
heating devices, such as microwave ovens, stoves, or radiators.
• Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use
your wireless device while driving.
• To prevent damage to your device's parts or internal circuits, do not use it in dusty, smoky, damp or dirty
environments or near magnetic elds.
• Do not use, store or transport the device where ammables or explosives are stored (in a gas station,
oil depot, or chemical plant, for example). Using your device in these environments increases the risk of
explosion or re.
• Dispose of this device, the battery, and accessories according to local regulations. They should not be
disposed of in normal household waste.Improper battery use may lead to re, explosion, or other hazards.
• The device has undergone testing and has demonstrated water and dust resistance in certain
environments.
• The device has a built-in, non-removable battery, do not attempt to remove the battery, otherwise the
device may be damaged.
• If the battery leaks, ensure that the electrolyte does not make direct contact with your skin or eyes. If the
electrolyte touches your skin or splashes into your eyes, immediately ush with clean water and consult a
doctor.
• When charging the device, make sure the power adapter is plugged into a socket near the devices and is
easily accessible.
严禁外传
仅供莱茵公司使用
华为信息资产
5
• Unplug the charger from electrical outlets and the device when not in use.
• Do not place sharp metal objects, such as pins, near the microphone. The microphone may attract these
objects and result in injury.
• Wireless devices may interfere with the airplane's ight system. Do not use your device where wireless
devices are not allowed according to the airplane company's regulations.
• To ensure the best audio performance of your device's microphone, use a cloth to wipe the area of the
microphone which has been exposed to water. Do not use the microphone until the wet areas are totally
dry.
• Switch o your wireless device whenever you are instructed to do so by airport or airline sta. Consult the
airline sta about the use of wireless devices on board the aircraft, if your device oers a ‘ight mode’ this
must be enabled prior to boarding an aircraft.
• Ensure that the power adaptor meets the requirements of Annex Q of IEC/EN 62368-1 and has been
tested and approved according to national or local standards.
• Protect the wearable and its accessories from strong impact, strong vibration, scratches, and sharp
objects, these may damage the device.
• Make sure that the wearable and its accessories stay clean and dry. Do not wear the wearable too loosely
or tightly during workouts. Clean your wrist and device after the workout. Rinse and dry the device to
clean it before putting it back on.
• If the wearable is built for swimming and showering, make sure to regularly clean the strap, dry your wrist
and the device before wearing it again.
• Loosen the strap for a little bit during the day to let your skin breathe. If wearing it starts to feel
uncomfortable, take o your wearable and let your wrist have a rest. If it still feels uncomfortable, stop
wearing it and seek medical advice as soon as possible. You can also purchase straps made from other
严禁外传
仅供莱茵公司使用
华为信息资产
6
materials and with dierent designs from the ocial Huawei website.
Disposal and recycling information
The crossed-out wheeled-bin symbol on your product, battery, literature or packaging reminds you
that all electronic products and batteries must be taken to separate waste collection points at the
end of their working lives; they must not be disposed of in the normal waste stream with
household garbage. It is the responsibility of the user to dispose of the equipment using a
designated collection point or service for separate recycling of waste electrical and electronic
equipment (WEEE) and batteries according to local laws.
Proper collection and recycling of your equipment helps ensure electrical and electronic
equipment (EEE) waste is recycled in a manner that conserves valuable materials and protects human
health and the environment, improper handling, accidental breakage, damage, and/or improper recycling at
the end of its life may be harmful for health and environment. For more information about where and how to
drop o your EEE waste, please contact your local authorities, retailer or household waste disposal service
or visit the website https://consumer.huawei.com/en/.
Please go to Settings >About >Regulatory Information on the device to view the E-label screen.
Please visit https://consumer.huawei.com/en/support/hotline for recently updated hotline and email address
in your country or region.
FCC Regulatory Compliance
RF exposure requirements
Important safety information regarding radio frequency (RF) radiation exposure:
The device complies with RF specications when the device is worn on the wrist and at a distance of 1.0 cm
from your face. Failure to observe this guideline may result in RF exposure exceeding limits.
严禁外传
仅供莱茵公司使用
华为信息资产
7
Certication information (SAR)
This device is also designed to meet the requirements for exposure to radio waves established by the
Federal Communications Commission (USA). The SAR limit adopted by USA is 1.6 W/kg averaged over 1
gram of tissue for use against the head and 4.0 W/kg averaged over 10 grams of tissue for use on the wrist.
The highest SAR value reported to the FCC for this device type complies with this limit.
FCC statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment o and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
--Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Any changes or modications to this device not expressly approved by Huawei Device Co., Ltd. for
compliance could void the user's authority to operate the equipment.
严禁外传
仅供莱茵公司使用
华为信息资产
8
Mexico Compliance: (This section is only applicable for Mexico.)
The operation of this device is subjected to the following two conditions: (1) This device may not cause
harmful interferences; and (2) this device must accept any interferences, including those that may cause an
undesired operation.
For information about the IFT certication, visit https://consumer.huawei.com/certication/.
严禁外传
仅供莱茵公司使用
华为信息资产
Inhaltsverzeichnis
Andere Huawei Betrachten Handbücher
Huawei
Huawei ARA-B19 Bedienungsanleitung
Huawei
Huawei WATCH GT 4 Bedienungsanleitung
Huawei
Huawei Watch GT3 46mm Bedienungsanleitung
Huawei
Huawei ARC-AL00 Bedienungsanleitung
Huawei
Huawei YDA-B19V Bedienungsanleitung
Huawei
Huawei Watch GT Bedienungsanleitung
Huawei
Huawei FIT Bedienungsanleitung
Huawei
Huawei GT 3 JPT Titanium Bedienungsanleitung
Huawei
Huawei FRG-B19 Bedienungsanleitung
Huawei
Huawei Watch 2 Bedienungsanleitung
Huawei
Huawei LTN-B19 Bedienungsanleitung
Huawei
Huawei WATCH Bedienungsanleitung
Huawei
Huawei ASN-AL10 Bedienungsanleitung
Huawei
Huawei Watch GT Installationsanleitung
Huawei
Huawei Watch GT 3 Bedienungsanleitung
Huawei
Huawei 55020ANQ Bedienungsanleitung
Huawei
Huawei WATCH 3 Series Bedienungsanleitung
Huawei
Huawei WATCH GT 3 Pro Bedienungsanleitung
Huawei
Huawei HONOR Watch GS Pro Referenzhandbuch
Huawei
Huawei FIT Bedienungsanleitung
