Hubbell WSB985BK Bedienungsanleitung

Hubbell Premise Wiring, HUBBELL INCORPORATED (Delaware)

14 Lord's Hill Rd, Stonington CT 06378 (800) 626-0005, Fax (860) 535-8328

www.hubbell-premise.com

Control No. Page of

Rev. Date: Hubbell Premise Wiring Instruction Sheet

®Control No. Page of

Rev. Date:

HwS775466 1 4

2 8/21/18

HwS775466 4 4

2 8/21/18

TABLE BOX INSTALLATION INSTRUCTIONS

Hubbell Premise Wiring, HUBBELL INCORPORATED (Delaware)

23 Clara Dr Suite 103 Mystic, CT 06355 (800) 626-0005, Fax (860) 535-8328

www.hubbell-premise.com

1ASSEMBLY:

2. MAKE ELECTRICAL CONNECTIONS TO LOW VOLTAGE

DEVICE(S) (PURCHASED SEPERATELY) AS REQUIRED WITH THE

PROVIDED INSTRUCTIONS. USE ONLY THE BOTTOM KNOCKOUTS

TO PASS CABLES THROUGH. SEE FIGURE 1

4. RE-INSTALL GANG PLATE WITH PROVIDED

SCREWS.

This Instruction sheet applies to the following Hubbell catalogs:

WSB985BK : PREWIRED 2 GANG TABLE BOX WITH USB

WSB986BK : PREWIRED 3 GANG TABLE BOX WITH USB

GENERAL INFORMATION:

1. NOTICE: FOR INSTALLATION BY QUALIFIED ELECTRICIAN IN ACCORDANCE WITH THE NATIONAL AND

LOCAL ELECTRICAL CODE AND THE FOLLOWING INSTRUCTIONS.

2. CAUTION: RISK OF ELECTRIC SHOCK. DISCONNECT POWER BEFORE INSTALLING.

3. NOTICE: FOR INDOOR USE ONLY.

4. CHECK THAT THE DEVICE(S) TYPE AND RATING ARE SUITABLE FOR THE APPLICATION.

5. NOTICE: IN ACCORDANCE WITH NEC AND CEC, DATA COMMUNICATIONS MUST BE SEPARATED

FROM POWER CIRCUITS.

6. COMPATIBLE TABLE THICKNESS: 3/4" TO 2.00"

5.THE GREEN (LED) IS "ON" WHEN THE DC SWITCH IS IN

THE "ON" POSITION AND THE USB PORT AND AUXILIARY

DC OUTPUTS ARE POWERED.

1. REMOVE GANG PLATE TO INSTALL

LOW VOLTAGE DEVICES

AVPS15BK

3. CONNECT DC HOOKUP WIRE (UL2468) BETWEEN

LOW VOLTAGE DEVICES (UP TO TWO DEVICES WITH

WSB986BK) AND THE AUX DC WIRES FROM THE

AVPS15BK.

BOTTOM K.O.

FIGURE 1

Control No. Page of

Rev. Date:

Control No. Page of

Rev. Date:

HWS775466 2 4

2 8/21/18

HwS775466 3 4

2 8/21/18

2OUTLET BOX HEIGHT ADJUSTMENT: 4TABLE BOX MOUNTING:

3GFI TEST:

"X" "Y"

WSB985BK 6.00" 6.50"

WSB986BK 7.50" 6.50"

TABLETOPHOLECUTOUTDIMENSIONS

TABLE BOX CHASSIS

1. TEST BEFORE FINAL ASSEMBLY INTO TABLE.

REMOVE THE (4) #6-32 x

1/4" PAN HEAD SCREWS TO

ADJUST THE HEIGHT OF THE

OUTLET BOX INSIDE THE

TABLE BOX CHASSIS

1. DETERMINE LOCATION AND CUT HOLE WITH

1/4 MAX RADIUS CORNERS IN TABLE TOP.

SEE TABLE FOR HOLE SIZE.

FRONT

2. CONFIRM FINAL HEIGHT OF OUTLET BOX ASSEMBLY IN

TABLE BOX CHASSIS BEFORE

INSTALLING IN THE TABLE (SEE STEP 2)

ROTATE LOCKING ARMS CLEAR OF TABLE AND INSERT

TABLE BOX ASSEMBLY INTO HOLE IN TABLE.

FRONT

4. ROTATE LOCKING ARMS TO SECURE ASSEMBLY TO

TABLE WITH ADJUSTMENT SCREW. LOCK ADJUSTMENT

SCREW WITH INTERGRAL NUT WHERE NEEDED. MAKE

ELECTRICAL CONNECTIONS AS REQUIRED.

SHARP TO 1/4 MAX R.

RIM

(2) LOCKING ARM

TABLE

RIM

(2) LOCKING ARM

ADJUSTMENT

SCREW WITH

LOCK NUT

“Y “X”

TABLE THICKNESS

3/4" TO 2.00"

2. THE GFI DEVICE IN THIS PRODUCT WILL IMMEDIATELY

PROVIDE POWER TO THE LOAD WHEN PLUGGED INTO A

POWER OUTLET.

3. PRESS THE "TEST" BUTTON. THE POWER "ON" LIGHT

SHOULD GO OFF.

4. PRESS THE "RESET" BUTTON. THE POWER "ON" LIGHT

SHOULD GO ON

5. DO NOT USE THE DEVICE IF IT FAILS THE ABOVE

TEST. THIS DEVICE DOES NOT PROTECT AGAINST

ELECTRICAL SHOCK DUE TO CONTACT WITH BOTH

CIRCUIT CONDUCTORS AND ALSO DUE TO A FAULT

IN ANY WIRING SUPPLYING THIS DEVICE.

TEST BUTTON

OUTLET BOX

ASSEMBLY

Dieses Handbuch passt für folgende Modelle

Andere Hubbell Kabel und Steckverbinder Handbücher

Hubbell

Hubbell KILLARK VSIH Series Betriebsanleitung

Hubbell

Hubbell SAFETY-SHROUD TWIST-LOCK Bedienungsanleitung

Hubbell

Hubbell GAI-TRONICS 400-005 Bedienungsanleitung

Hubbell

Hubbell 50 AMP TWIST-LOCK Bedienungsanleitung

Hubbell

Hubbell 228FTV Handbuch

Hubbell

Hubbell IS628BT Handbuch

Hubbell

Hubbell 4-PLEX Bedienungsanleitung

Hubbell

Hubbell HBL6750 Bedienungsanleitung

Hubbell

Hubbell Gleason Reel P28 Anwendungshandbuch

Hubbell

Hubbell MINI-QUICK H MS FA1 Series Bedienungsanleitung

Hubbell

Hubbell 50 AMP TWIST-LOCK Bedienungsanleitung

Hubbell

Hubbell Insulgrip Bedienungsanleitung

Hubbell

Hubbell KILLARK MC Series Bedienungsanleitung

Hubbell

Hubbell HPS/RFL Bedienungsanleitung

Hubbell

Hubbell Gleason Reel SZ-18 Bedienungsanleitung

Hubbell

Hubbell GLEASON 602152 Bedienungsanleitung

Hubbell

Hubbell INSULGRIP HBL3200RS2W Bedienungsanleitung

Hubbell

Hubbell HBLI35103Y Bedienungsanleitung

Hubbell

Hubbell 16A Bedienungsanleitung

Hubbell

Hubbell HBLC40123 Bedienungsanleitung

Beliebte Kabel und Steckverbinder Handbücher anderer Marken

Philips

Philips SWA6310 Bedienungsanleitung

StarTech.com

StarTech.com CRJ4550PK Bedienungsanleitung

Nohau

Nohau EMUL-IP2K-PC Bedienungsanleitung

Foxun

Foxun SX-SP144E-HD4K2K Bedienungsanleitung

Philips

Philips SWA3305W Bedienungsanleitung

opticis

opticis Stretch DVIM1-1P0x Bedienungsanleitung

Volkswagen

Volkswagen VAS 6558A Bedienungsanleitung

NEXIBO

NEXIBO N-13 Bedienungsanleitung

CYP

CYP PU-1H3HBTL Bedienungsanleitung

Allen-Bradley

Allen-Bradley 1784-u2dhp Bedienungsanleitung

Global Caché

Global Caché Flex Link Blaster Bedienungsanleitung

Hauppauge

Hauppauge USB-Live2 Bedienungsanleitung

Fenix

Fenix MPSV 15 Bedienungsanleitung

BEGA

BEGA 71 085 Bedienungsanleitung

Tesla

Tesla HPWC Bedienungsanleitung

GAMERON

GAMERON LUXURY TV CABLE Bedienungsanleitung

molex

molex Milli-Grid Dual row 87568 Series Bedienungsanleitung

Burndy

Burndy Continental Industries thermOweld CRE-7 Bedienungsanleitung