Hubbell GAI-TRONICS HUBBCOM GSC Bedienungsanleitung

Pub. 42004-551B 
 
G A I - T R O N I C S ®
A H U B B E L L C O M P A N Y 
HUBBCOM™ 
Device Configuration Guide 
TA B L E O F CO N T E N T S 
GAI-TRONICS 3030 KUTZTOWN RD. READING, PA 19605 USA 
610-777-1374 ◼800-492-1212 ◼Fax: 610-796-5954 
VISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS 
Confidentiality Notice.....................................................................................................................3 
General Information.......................................................................................................................3 
Configuration Tree Structure.........................................................................................................3 
Unit Screen......................................................................................................................................5 
Feature Availability................................................................................................................................8 
Network....................................................................................................................................................9 
Network—Default LAN ..................................................................................................................... 10 
Network—WiFi..................................................................................................................................11 
Network—Access Point...................................................................................................................... 12 
VLAN .................................................................................................................................................13 
VLAN A-H......................................................................................................................................... 14 
Intercom.................................................................................................................................................16 
Streams................................................................................................................................................17 
Mutual Provisioning ...........................................................................................................................22 
Discovery Channel.............................................................................................................................. 22 
Outputs................................................................................................................................................ 23 
Phone......................................................................................................................................................23 
SIP Registrar 1–3................................................................................................................................24 
SIP Contacts........................................................................................................................................26 
SIP Advanced Features.......................................................................................................................28 
Point to Point.........................................................................................................................................29 
HUBBCOM GSC Devices..................................................................................................................29 
HUBBCOM GRC Devices.................................................................................................................31 
Contacts .................................................................................................................................................33 
Access Control.......................................................................................................................................34 
Auxiliary Door Control ........................................................................................................................36 
E3 APLite...............................................................................................................................................37 
Web Portal.............................................................................................................................................38 
Video ......................................................................................................................................................39 
Monitoring.............................................................................................................................................40 

Table of Contents Pub. 42004-551B

GAI-TRONICS 3030 KUTZTOWN RD. READING, PA 19605 USA

610-777-1374 ◼800-492-1212 ◼Fax: 610-796-5954

VISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS

Tamper Detection ...............................................................................................................................40

Notification......................................................................................................................................... 41

Motion Detection................................................................................................................................ 42

Output Contacts....................................................................................................................................43

Input Contacts.......................................................................................................................................44

Activation...............................................................................................................................................45

Reference Documents...................................................................................................................45

Glossary.........................................................................................................................................46

Pub. 42004-551B

G A I - T R O N I C S ®

A H U B B E L L C O M P A N Y

HUBBCOM™

Device Configuration Guide

GAI-TRONICS 3030 KUTZTOWN RD. READING, PA 19605 USA

610-777-1374 ◼800-492-1212 ◼Fax: 610-796-5954

VISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS

Confidentiality Notice

This configuration guide contains sensitive business and technical information that is confidential and

proprietary to GAI-Tronics. GAI-Tronics retains all intellectual property and other rights in or to the

information contained herein, and such information may only be used in connection with the operation of

your GAI-Tronics product or system. Do not disclose this document in any form, in whole or in part,

directly or indirectly, to any third party.

General Information

HUBBCOM™ devices are multi-functional; supplying access control, intercom, I/O control, public

address, tamper detection, telephone, video, and webpage portal capabilities. This manual provides

information to configure HUBBCOM GSC (GAI-Tronics smart controller) and HUBBCOM GRC (GAI-

Tronics remote controller) devices to perform the desired function(s) using the GUDA (GAI-Tronics

Universal Device Application) software.

The GUDA software is available for free download at: https://www.hubbell.com/gai-tronics/en/guda-

universal-device-application. Refer to GAI-Tronics Pub. 42004-531 for GUDA software user instructions

(see the Reference Documents section).

Configuration Tree Structure

Access HUBBCOM GSC and GRC devices using the GUDA software to display the device’s

configuration parameters in a tree structure (see Figure 1). Select the nodes in the tree to display and edit

the parameters to configure each feature for its intended purpose.

This document explains each screen in the GUDA and the associated parameters for HUBBCOM GSC

and GRC devices. Default values for parameters have a bold font in the tables. HUBBCOM features

vary by model number, so some screens may not apply to the current HUBBCOM device.

NOTE:The GUDA does not display configuration screens for unsupported features of the current

HUBBCOM device.

The root level in the GUDA’s configuration tree for HUBBCOM devices is the UNIT level (see Figure 1).

The UNIT level of the configuration tree includes sub nodes for the required functions and available

features of the connected HUBBCOM device, including; FEATURE AVAILABILITY, NETWORK, INTERCOM

(GSC models only), PHONE, POINT TO POINT, CONTACTS, ACCESS CONTROL(remote controllers only),

AUXILIARY DOOR CONTROL, E3 AP LITE, WEB PORTAL(GSC models only), VIDEO, MONITORING,

OUTPUT CONTACTS (GSC models only), INPUT CONTACTS, and ACTIVATION (GSC models only).

Pub. 42004-551B

HUBBCOM Device Configuration Guide Page 4 of 47

P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-551B.docx

01/21

Figure 1. HUBBCOM GSC and GRC Device Configuration Trees

Pub. 42004-551B

HUBBCOM Device Configuration Guide Page 5 of 47

P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-551B.docx

01/21

Unit Screen

Configure the device hardware and top level functionality for the HUBBCOM GSC or GRC device on

the UNIT parameters screen (see Figure 2).

Figure 2. HUBBCOM GSC and GRC Unit Screens

The UNIT configuration screen contains the following parameters (see Table 1):

Pub. 42004-551B

HUBBCOM Device Configuration Guide Page 6 of 47

P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-551B.docx

01/21

Table 1. HUBBCOM Unit Configuration Parameters

Field Name

Description

Valid Settings

Model

This read-only field displays the model number of the currently

connected HUBBCOM device.

HUBBCOM model

number

Device Name

A user-friendly recognizable name for the HUBBCOM device.

Alpha numeric entry.

The hyphen (-) is the

only other character

allowed.

Default: HUBBCOM-

[MAC ADDRESS]

Entry Station

Applicable to: Telephone functions.

When set to YES, the HUBBCOM screen displays the Contact

List—Favorites

NOTE:Populate the Contact List—Favorites before configuring

a station as an entry station. Once set as an entry station,

the contact list is not accessible from the HUBBCOM

screen.

•Two-way video: allows both parties to view each other during

the call.

•One-way video: allows the called party to view the caller, but

the caller cannot view the called party.

•No

•Yes—two-way

video

•Yes—one-way

video

Home Mode

(GSC models

only)

Sets the HUBBCOM function to display upon start up. Options

available depend on the model number.

NOTE:The home screen is not available when configuring the

station as an entry station.

NOTE:Change this setting on the touch screen display under the

SETTINGS/DEVICE tab.

•Intercom

•Phone

•Access Control

•Web portal

•None

Number of Lines

(GSC models

only)

Applicable to: Telephone functions.

Sets the number of simultaneous telephone connections the device

can service.

1–4

Show Clock

Displays the date and time at the top left corner of all user screens

Yes | No

External Speaker

Enables the speaker amplifier to power an external loudspeaker

connected to the speaker terminals on the rear of the HUBBCOM

device.

Yes | No

Orientation

Defines the touch screen display orientation.

•Auto

•Portrait (Right)

•Portrait (Left)

•Landscape

(Normal)

•Landscape

(Inverted)

Brightness

Sets the brightness of the touch screen display.

NOTE:Configurable on the touch screen display on the

SETTINGS/DEVICE tab.

•High

•Mid

•Low

Pub. 42004-551B

HUBBCOM Device Configuration Guide Page 7 of 47

P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-551B.docx

01/21

Field Name

Description

Valid Settings

Screen Saver

Enable or disable the screen saver.

NOTE:When the screen saver is active, the screen turns OFF

resulting in a black screen. Motion detection by the

camera or touching the screen turns the screen ON,

restoring the previous image.

Yes |No

Screen Saver

Delay

The time in seconds before the screen saver starts.

[15–3600] in 5-second

steps (default: 60 s)

Activity Detect

Contact

Selects one of four available outputs to follow the unit’s active

state. The contact is active when the unit is active and deactivates

when the screen saver starts.

NOTE:Local outputs one and two are solid state relay contacts

capable of switching 0.4A at 60 V max. Outputs are on

the rear panel of the HUBBCOM.

NOTE:USB 1 and 2 require connection to an external I/O board

via the USB port on the rear panel of the HUBBCOM.

•None

•Local Out 1

•Local Out 2

•USB Out 1

•USB Out 2

Contact Active

Times

During the set time periods, the output contact deenergizes when

the screen saver is active.

There are four individual time-of-day periods.

Start Time–End Time

(12:00 AM–12:00 PM)

Ring Tone

Front panel speaker audio tone for incoming phone call

notification.

NOTE:Configurable on the touch screen display on the

SETTINGS/DEVICE tab.

•US Standard

•double low

•double high

•double low high

•double high low

•long-short low

•short-long low

•long-short high

•short-long high

•low

•low double

•mid

•mid double

•high

•high double

•highest

•highest double

Ringer Volume

Front panel speaker volume level for the Ring Tone.

NOTE:Configurable on the touch screen display on the

SETTINGS/DEVICE tab.

•Low

•1–6

•High

Handset Volume

Volume of the handset receiver.

NOTE:Configurable on the touch screen display on the

SETTINGS/DEVICE tab.

−12 thru +12,

Default: 0

Handsfree

Volume

Front panel speaker volume during handsfree phone calls.

NOTE:Configurable on the touch screen display on the

SETTINGS/DEVICE tab.

−12 thru +12,

Default: 0

Pub. 42004-551B

HUBBCOM Device Configuration Guide Page 8 of 47

P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-551B.docx

01/21

Field Name

Description

Valid Settings

Handsfree Mic

Gain

Sensitivity of the front panel microphone

NOTE:Configurable on the touch screen display on the

SETTINGS/DEVICE tab.

−12 thru +12,

Default: 0

Local Page

Volume

Volume of the front panel speaker during intercom paging.

NOTE:Configurable on the touch screen display on the

SETTINGS/DEVICE tab.

−12 thru +12,

Default: 0

External Speaker

Volume

External speaker volume during intercom paging.

0–36,

Default: 24

Local Settings

Enabled

Makes the SETTINGS button visible on the HUBBCOM main

menu screen

Yes | No

Allow Demo

Mode

Makes the DEMO MODE button visible on the HUBBCOM main

menu screen

Yes | No

Allow Factory

Reset

Makes the FACTORY RESET button visible on the HUBBCOM

SETTINGS/DEVICE screen.

Yes | No

Feature Availability

The FEATURE AVAILABILITY screen enables/disables/restricts features of the HUBBCOM device.

Figure 3. Feature Availability Screen

Pub. 42004-551B

HUBBCOM Device Configuration Guide Page 9 of 47

P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-551B.docx

01/21

Table 2. Feature Availability Parameters

Field Name

Description

Valid Settings

NFC Signal

Enables/disables the NFC (near field communication) reader.

On | Off

NFC Facility ID

Code

Numeric code for additional validation of cards by facility ID code

in addition to the card’s serial number. Assign each building or

location a code to prevent cardholders from accessing each other’s

facilities.

0–255

Intercom

Enables/disables/restricts the intercom function. Enable the

intercom feature to turn it on. Set it to disabled to disable it. Select

restricted to control intercom access via NFC card reader

authorization. Configure NFC cards from the TOOLS tab in the

GUDA. (see Pub. 42004-531 for instructions on programming NFC

cards.)

•Enabled

•Disabled

•Restricted

Telephone

Enables/disables/restricts the telephone function. Enable the

telephone feature to turn it on. Set it to disabled to disable it. Select

restricted to control telephone access via NFC card reader

authorization. Configure NFC cards from the TOOLS tab in the

GUDA. (see Pub. 42004-531 for instructions on programming NFC

cards.)

•Enabled

•Disabled

•Restricted

Web Portal

Enables/disables/restricts the web portal function. Enable this

feature to turn it on. Set it to disabled to disable it. Select restricted

to control web access via NFC card reader authorization. Configure

NFC cards from the TOOLS tab in the GUDA. (see Pub. 42004-531

for instructions on programming NFC cards.)

•Enabled

•Disabled

•Restricted

E3 APLite

Enables/disables/restricts the E3 APLite function. Enable the

feature to turn it on. Set it to disabled to disable it. Select restricted

to control web access via NFC card reader authorization. Configure

NFC cards from the TOOLS tab in the GUDA. (see Pub. 42004-531

for instructions on programming NFC cards.)

•Enabled

•Disabled

•Restricted

Network

The NETWORK node has sub nodes for Ethernet IP network operation. The sub nodes include WIFI,

ACCESS POINT, DEFAULT LAN, and VLAN.

Figure 4. Network Parameters Screen

Pub. 42004-551B

HUBBCOM Device Configuration Guide Page 10 of 47

P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-551B.docx

01/21

NOTE:The NETWORK MODE parameter is only applicable to HUBBCOM GSC devices.

Table 3. Network Parameters

Field Name

Description

Valid Settings

Network Mode

(GSC models

only)

Defines how the smart controller connects to the network or if it

is acting as a wireless access point.

•Wired—Ethernet jack is in use as hardwired connection to

the network.

•Wireless—WiFi adapter is in use for wireless connection to

the network

•Wired +AP—Ethernet jack is in use for hardwired

connection to the network and the Wi-Fi adapter is an access

point for other Wi-Fi users.

•Wired

•Wireless

•Wired +AP

Hostname

A unique name that identifies each station on the network.

Use a maximum of 32

characters consisting of

a–z, 0–9and -.

The station’s mac

address forms the

default hostname.

Use IGMP

Snooping

Enables or disables IGMP on the HUBBCOM switch port. This

is the process of listening to IGMP network traffic to control

delivery of IP multicasts.

Yes | No

NTP Server

IP address of the SNTP (simple network time protocol) server.

The SNTP Server’s IP

address in IPv4 format.

Network—Default LAN

Figure 5. Network Configuration Screen

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hubbell Sicherheitsausrüstung Handbücher

Hubbell

Hubbell Chance Equi-Mat C6002850 Bedienungsanleitung

Beliebte Sicherheitsausrüstung Handbücher anderer Marken

Innova

Innova Xtirpa Bedienungsanleitung

bolle SAFETY

bolle SAFETY B810 Bedienungsanleitung

SHENZHEN FANHAI SANJIANG ELECTRONICS

SHENZHEN FANHAI SANJIANG ELECTRONICS A9060T Bedienungsanleitung

Hiltron security

Hiltron security POWER8E Leitfaden

Hatco

Hatco B-950P Bedienungsanleitung

Sitec

Sitec TX MATIC Bedienungsanleitung

TEUFELBERGER

TEUFELBERGER GRIP 12 Bedienungsanleitung

MSA

MSA PremAire System Bedienungsanleitung

AMC

AMC 1022M Series Bedienungsanleitung

Trinity

Trinity CASS S3 Bedienungsanleitung

CMC

CMC Helitack HotSeat Bedienungsanleitung

Force

Force P-35 Bedienungsanleitung

ACM

ACM SAFETY D200 Produkthandbuch

Honeywell

Honeywell Miller H-Design DuraFlex Bedienerhandbuch

ROCK

ROCK P-451 AS Bedienungsanleitung

Power first

Power first 2XYR7A Service-Handbuch

SCHUBERTH

SCHUBERTH SHP 28-C Bedienungsanleitung

Trango

Trango CINCH Bedienungsanleitung