Hubbell Euclid PBP Pendant Bedienungsanleitung

INSTRUCTIONS

2020

Publication No. 132

January 1985

Hubbell Industrial Controls, Inc. Repl.: January 1984

EUCLID™ PBP PENDANT

PUSHBUTTON STATIONS

ASSEMBLY AND PARTS INFORMATION

Step #1 Position hanger bracket (Item 1) as required and

tighten locking nut 1/3 turn past finger tight.

Step #2 Pilot light assembly (Item 2) if used -- push out plug

(P/N 28338) from rear. Insert light assembly. Insert

pilot light legend plate. Install locking ring.

Step #3 *Install button assembly (not Pictorially shown).

Align keying tabs and holes and press push button

assembly into terminal boards. Tighten hold down

screws. (Not used on MS2 & MS5). AVOID

OVERTIGTENING

Step #4 *Install terminal board with button assembly working

from top to bottom. Use 8-32 x 1/2" (P/N 47661-

098) "sems" screws (Item 4) where single thickness

terminal board is fastened. Observe "Top" marking

on each board. AVOID OVERTIGHTENING

Step #5 *Use 8-32 x 5/8" (P/N 47661-100) "sems" screws

(Item 5) where two terminal boards overlap. AVOID

OVERTIGHTENING

Step #6 Use 8-32 x 1/2" (P/N 47243-059) pan head screws

(Item 6) to install button guards and back cover.

CAUTION: DO NOT OVERTIGHTEN THESE

SCREWS. Recommended torque is 10 in. lbs. To

12 in. lbs. Maximum. A slight rubber bulging is

allowed.

* Where direct wired push buttons are used,

Steps #3, #4, & #5 do not apply.

PILOT LIGHTS

DESCRIPTION CATALOG

NUMBER

LAMP

PART NO. DESCRIPTION CATALOG

NUMBER

LAMP

PART NO.

Pilot Light 120v 60 Hz AC

Pilot Light 240v 60 Hz AC

PL1

PL2

57465-015

Pilot Light 120V DC

Pilot Light 240v DC

PL3

PL4

57465-043

57465-007

Hubbell Industrial Controls, Inc.

A subsidiary of Hubbell Incorporated

4301 Cheyenne Dr., Archdale, NC. 27262

Telephone (336) 434-2800 • FAX (336) 434-2803

http://www.hubbell-icd.com

[email protected]

ENCLOSURE DIMENSIONS

CONTACT

INTERRUPTING

RATINGS

MOTION A APPROX. WT.

ASSEMBLED CATALOG NO. MULTI-SPEED

SINGLE BREAK

2 Buttons 7-7/8"2-

1/2lbs. E2 A.C.

35% PF

120v

240v

4 Buttons 13-11/16"4-

1/2lbs. E4 D.C.

IND

125v

250v

.4A

.2A

6 Buttons 18" 5-1/2lbs. E6 SINGLE SPEED

DOUBLE BREAK

8 Buttons 22-5/16"7lbs. E8 A.C.

35% PF

120v

240v

* Pilot light is not available on 1 motion enclosure D.C.

IND.

125v

250v

1.1A

.55A

SINGLE SPEED INSERT

DESCRIPTION

SYMBOL PLUG-IN*

DIRECT

WIRED**

CAT.

NO.

TYPICAL

APPLI-

CATIONS

MOMENTARY

N.O. -- PG1

-- MOMENTARY

N.O. DW1

Crane control:

trolley, bridge

& hoist, etc.

-- MAINTAINED DWS Start-Stop

functions

MOMENTARY

N.O. & N.C. -- PG2

Interlocking,

crane control

MAINTAINED

N.O. & N.C. -- PG3

Auxiliary

functions

MAINTAINED

MOMENTARY

LIFT/DROP

-- PG4 †

Magnet

control

MOMENTARY

MAINTAINED -- PG5 †

Used as a

toggle switch

and for start-

stop functions

MOMEMTARY

START-STOP

RESET-STOP

-- PG6 •

Start-stop on-

off functions

MOMENTARY

STOP-START

STOP-RESET

-- PG7 •

Stop-start off-

on functions

† PG4 and PG5 inserts have one button maintained and one button momentary.

* Terminal Base Cat. TB2 required for each plug-in insert PG1, PG2, PG3, PG4, PG5,

PG6, PG7 and MS2. Terminal Base TB5 required for MS5 insert.

**Terminal Base not required with direct wired unit.

• "Power On-Off" buttons recommended to comply with provisions of NEMA ICS 3-442.15

MULTI-SPEED INSERT

DESCRIPTION

SYMBOL PLUG-IN*

CAT.

NO.

TYPICAL

APPLI-

CATION

USED TO A

MAXIMUM

OF THREE

SPEED

POINTS

MS2

For

multi-

speed

func-

tions

USED TO A

MAXIMUM

OF FIVE

SPEED

POINTS

MS5

For

multi-

speed

func-

tions

Dieses Handbuch passt für folgende Modelle

Andere Hubbell Schalten Handbücher

Hubbell

Hubbell Limit Switches Bedienungsanleitung

Hubbell

Hubbell RDS50Z Bedienungsanleitung

Hubbell

Hubbell 4211 Gebrauchs- und Pflegehandbuch

Hubbell

Hubbell 2243 Bedienungsanleitung

Hubbell

Hubbell CIRCUIT-LOCK Bedienungsanleitung

Hubbell

Hubbell H-MOSS AP Bedienungsanleitung

Hubbell

Hubbell LUXSTATSW1 Bedienungsanleitung

Hubbell

Hubbell MOTORQUICK Bedienungsanleitung

Hubbell

Hubbell Reversing Drum Controller 58-GJ5 Handbuch

Hubbell

Hubbell 2210 Bedienungsanleitung

Hubbell

Hubbell SNAPConnect Series Bedienungsanleitung

Hubbell

Hubbell iDevices IDEVZ01DW Bedienungsanleitung

Hubbell

Hubbell 58-GC5026 Handbuch

Hubbell

Hubbell M3 Programmierhandbuch

Hubbell

Hubbell WL Series Bedienungsanleitung

Hubbell

Hubbell CIRCUIT-LOCK Series Konfigurationshandbuch

Hubbell

Hubbell 4310 Handbuch

Hubbell

Hubbell CXSW Bedienungsanleitung

Hubbell

Hubbell Circuit-Lock Bedienungsanleitung

Hubbell

Hubbell C5027 Handbuch

Hubbell

Hubbell Furnas Brand Series 54 Bedienungsanleitung

Hubbell

Hubbell LVS1HD Betriebsanleitung

Hubbell

Hubbell Killark VWSQ Series Bedienungsanleitung

Hubbell

Hubbell Euclid 100E Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch