Hubbell GAI-TRONICS TempSense TS100 Bedienungsanleitung

Pub. 42004-565B 
 
G A I - T RO N I C S®
A H UB B E L L C O M P A N Y 
TempSense Model TS100 
TA B L E O F CO N T E N T S 
GAI-TRONICS 3030 KUTZTOWN RD. READING, PA 19605 USA 
610-777-1374 ◼800-492-1212 ◼Fax: 610-796-5954 
VISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS 
Confidentiality Notice.....................................................................................................................1 
General Information.......................................................................................................................1 
Installation ......................................................................................................................................2 
Camera Location.....................................................................................................................................2 
Wall Mount...........................................................................................................................................3 
Pole Mount............................................................................................................................................3 
VESA Mount ........................................................................................................................................3 
Stand Mount..........................................................................................................................................3 
Connections .............................................................................................................................................4 
HDMI Monitor......................................................................................................................................4 
USB Mouse...........................................................................................................................................4 
Power....................................................................................................................................................4 
Operation.........................................................................................................................................4 
Environment............................................................................................................................................4 
Subject Preparation................................................................................................................................5 
Calibration...............................................................................................................................................5 
Scan Subjects...........................................................................................................................................6 
Specifications ..................................................................................................................................6 
Electrical..................................................................................................................................................6 
Mechanical...............................................................................................................................................6 
FLIR Camera..........................................................................................................................................6 
Environmental.........................................................................................................................................6 

Pub. 42004-565B

GAI-TRONICS®

A HUBBELL COMPANY

TempSense Model TS100

GAI-TRONICS 3030 KUTZTOWN RD. READING, PA 19605 USA

610-777-1374  800-492-1212  Fax: 610-796-5954

VISIT WWW.GAI-TRONICS.COM FOR PRODUCT LITERATURE AND MANUALS

Confidentiality Notice

This installation and operation manual contains sensitive business and technical information that is

confidential and proprietary to GAI-Tronics. GAI-Tronics retains all intellectual property and other rights

in or to the information contained herein, and such information may only be used in connection with the

operation of your GAI-Tronics product or system. This manual may not be disclosed in any form, in

whole or in part, directly or indirectly, to any third party.

General Information

The TempSense Model TS100 measures and captures EBT (elevated body temperature) or EST (elevated

skin temperature) of subjects moving through its field of view. The TS100 consists of one FLIR®

(forward looking infra-red) camera and one standard video camera sharing the same FOV (field of view)

in a wall, pole, or stand mountable enclosure. The TS100 captures 608 × 464 resolution images on both

cameras and displays them side by side on a 1280 × 720 resolution HDMI monitor when the highest

temperature in the FOV is above the configurable preset temperature. The TS100 also captures still

images by pressing the video-capture button.

Figure 1. TempSense Model TS100

Pub. 42004-565B

TempSense Model TS100 Page 2of 6

P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-565B.docx

03/21

Installation

NOTE:The accuracy of the TempSense TS100 requires individual subjects pass within two to six feet of

the thermal imaging camera lens. Results with different camera positions may vary. Thermal

imaging camera accuracy improves as the subject moves closer to the camera.

Camera Location

Locate the TempSense TS100 so that people in a queue individually pass through the two cameras’ shared

FOV (field of view) while facing the cameras. Each subject scanned should come within two to six feet

of the cameras. The ideal height for camera installation is 5 feet 5 inches above the floor. Installation at a

higher location requires aiming the TS100 downward so that each subject’s forehead passes through the

center of the FOV (see Figure 2 and Figure 3).

Figure 2. SAMPLE FIGURE Camera Positioning (Side View)

Figure 3. SAMPLE FIGURE Camera Positioning (Top View)

Pub. 42004-565B

TempSense Model TS100 Page 3 of 6

P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-565B.docx

03/21

Wall Mount

Mount the TempSense TS100 to a wall as

follows (see Figure 5):

1. Secure the mounting plate (see Figure

4) to a flat surface using (customer

supplied) hardware.

Use the four VESA mount holes to

secure the mounting plate to the wall.

No. 8 screws fit through the 0.190-inch

threaded VESA mounting holes.

2. Secure the TS100 to the mounting

plate using the four included #6-32

screws.

Pole Mount

Mount the TempSense TS100 to a pole

(see Figure 6) as follows:

1. Secure the TS100 mounting plate (see

Figure 4) to a pole using (customer

supplied) worm-drive clamps

2. Secure the TS100 to the mounting

plate using the four included #6-32

screws.

VESA Mount

Attach a VESA (video electronics

standards association) mount to the

mounting plate with the included #10-24

screws and washers (see Figure 4).

NOTE: The TS100 includes four #10-24 ×

0.38-inch long screws to attach a

customer supplied VESA mount.

Do not use any screws other than

the included #10-24 screws to

attach the VESA mount to the

TS100’s mounting plate.

Stand Mount

Mount the TS100 to a tripod or

microphone stand using the included L-

bracket (see Figure 7).

1. Secure the mounting plate to the

TS100 using four #6-32 screws.

Figure 4. Mounting Plate Detail

Figure 5. Wall-Mount Detail

Figure 6. Pole-Mount Detail

Pub. 42004-565B

TempSense Model TS100 Page 4 of 6

P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-565B.docx

03/21

2. Secure the L-bracket to the mounting

plate using the two included #8-32 flat

head machine screws (see Figure 8).

3. Secure the L-bracket to a microphone

stand or tripod (see Figure 7).

Connections

HDMI Monitor

Plug the HDMI cable from a (customer

supplied) HDMI monitor into the HDMI

pigtail connector, on the left bottom side of

the TS100.

USB Mouse

Plug a (customer supplied) USB mouse into

the USB port pigtail, on the right bottom

side of the TS100.

Power

Plug the included power supply into the

power cord pigtail, on the left bottom side

of the TS100.

Operation

1. Power on the attached HDMI monitor.

2. Plug the TS100 power supply into a 120 V ac power outlet.

The TS100's IR sensor has a white LED that blinks slowly for 40 seconds, then changes to a fast

blink.

NOTE: If the IR sensor LED does not flash, press the sensor into its socket using a soft cloth, then

reboot the device.

3. Allow the TS100 to come up to normal operating temperature before calibration (see the Calibration

section) or operation (see the Scan Subjects section) (about 10–30 minutes).

Environment

Environmental considerations for the TS100 NCIT (non-contact infra-red thermometer) performance:

• Use the temperature scanning feature of the TS100 in a draft-free space that is out of direct sunlight

and away from radiant heat sources.

• The optimal environment for the TS100 temperature sensor is between 60.8–104 ºF (16–40 ºC) with

the relative humidity below 85 percent.

• Allow the TS100 to operate in the testing environment for 10–30 minutes to adjust to its environment

before scanning personnel.

Figure 7. TS100 L-Bracket

Figure 8. L-Bracket Attachment for Tripod/Microphone

Stand Mounting

Pub. 42004-565B

TempSense Model TS100 Page 5of 6

P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-565B.docx

03/21

Subject Preparation

To obtain accurate skin temperatures, ensure that the subject has not:

•been wearing a hat, scarf, heavy clothing, etc.

•underwent recent physical exertion

•just entered from a much lower temperature environment

•recently used facial cleaning products

•engaged in any other act that may affect their skin temperature.

Calibration

1. Place an object of known temperature in the field of view of the TS100 at the same height and

distance from where the TS100 will scan subjects.

The calibration object must be the hottest object in the FOV.

2. While watching the temperature of the object in the IR video feed (left side), press the setup button.

3. Slide the OFFSET slider to adjust the on-screen temperature until it displays the known temperature

(see Figure 9).

Figure 9. Temperature Superposition and Calibration

4. Select FAHRENHEIT or CELSIUS from the UNITS field on screen.

Selection of either scale reboots the TS100. The TS100 displays the temperature in the selected units

after rebooting.

5. Adjust the TEMP THRESHOLD to the temperature for the TS100 to alert the operator and capture a

still photo.

The TS100 captures both an IR and normal picture when the temperature exceeds the TEMP

THRESHOLD value.

Pub. 42004-565B

TempSense Model TS100 Page 6of 6

P:\Standard IOMs - Current Release\42004 Instr. Manuals\42004-565B.docx

03/21

Scan Subjects

NOTE:Accuracy of the thermal imaging camera improves as the subject moves closer to the camera.

•The monitor displays live video for the thermal imaging camera under normal operation.

•The TS100 superimposes the temperature of the hottest item in the FOV in the IR view (see Figure 9).

•When a subject with a temperature exceeding the configured temperature enters the IR camera's FOV:

•The TS100 captures and displays a still image of the IR and standard camera's picture.

•OVER TEMPERATURE flashes on screen, notifying the operator of the overtemperature subject.

•The TS100 displays the measured temperature of the subject, superimposed over the IR picture

(see note above).

1. Press the ACK/RESET button to resume normal temperature scanning.

2. Press the VIDEO CAPTURE button at any time to capture still pictures from the IR and visible light

cameras. Press the ACK/RESET button to resume temperature scanning.

Specifications

Electrical

Power.........................................................................................................................................3 A at 5 V dc

Mechanical

Dimensions .............................................................7.26 H × 5.76 W × 1.5 D in (184.4 × 146.3 × 38.1 mm)

Weight...................................................................................................................................... 2.0 lb (0.9 kg)

FLIR Camera

Horizontal FOV .........................................................................................................................................51°

Vertical FOV.........................................................................................................................................38.25°

Environmental